How to install Halo-GTR Signals on a 2019+ Yamaha R3 by TST Industries

แชร์
ฝัง
  • เผยแพร่เมื่อ 19 ก.พ. 2019
  • The TST exclusive Halo-GTR LED flushmount signal system for the 2019 Yamaha YZF-R3. This HALO-GTR front flushmount signal kit is a pre-packaged bundle of the GTR Flushmount Signal and the HALO Running Light Module for the Yamaha R3. For more info see: goo.gl/B72cE8
    Make sure to subscribe here: bit.ly/1jq2ZrN
    Follow us on Facebook here: on. 1nuTjlF
    Follow us on Instagram here: / tstindustries
    Follow us on Twitter here: / tstindustries
    The HALO-GTR technology has been one of TST's most successful innovations and has been upgrading Honda's around the world for the past several years. With the most advanced optics in the flushmount signal market, a shape that is contoured to the outer geometry of the fairing and fits perfectly within the signal well, and true plug-and-play installation, there is truly nothing else like it on the market. Quality, personalization, and visibility don't get any better than this. Now, you'll be able to get this unique look on your brand new Yamaha R3!
  • บันเทิง

ความคิดเห็น • 245

  • @Njubish
    @Njubish 5 ปีที่แล้ว +123

    The fact that this doesn't come stock is insane. How can Yamaha put those abomination of turn signals on such a sexy bike.

    • @Njubish
      @Njubish 5 ปีที่แล้ว +9

      @@morebrainmoregains3234 kawasaki does it on their bikes.

    • @BrunoSantos-sy8ut
      @BrunoSantos-sy8ut 5 ปีที่แล้ว +1

      I think the problem is only in the US, here in Portugal and all over de the Europe comes with a modern turn lights, that is a shame but I think you may find other legal option.

    • @matthewperry5712
      @matthewperry5712 ปีที่แล้ว +2

      Lawyers

    • @fatbongripz4207
      @fatbongripz4207 ปีที่แล้ว +4

      i can tell you why. with these signals, they can only be seen from the side. with those bulky turn signals that come with the bike in USA, they can be seen from the front. so if you're at a traffic light where left turners yield to traffic going straight, nobody can see which direction you're turning unless you use hand signals. and R3 doesn't have turn signals in the mirrors like Kawasaki does. so your only option is either the Yoshimura signals that face forwards, or these flush TST signals

    • @jakecrudgington4886
      @jakecrudgington4886 10 หลายเดือนก่อน

      yahama put it on for comedic effect🤣

  • @crusoeart2951
    @crusoeart2951 3 ปีที่แล้ว +12

    Recieved my r3 package in 2 days. All the parts was pretty easy to install following the tutorial. Thank you so much for all of u guys. My r3 looks more aggressive now.

    • @TSTindustries
      @TSTindustries  3 ปีที่แล้ว +2

      That's great to hear and thanks for the love!

  • @tristang2796
    @tristang2796 5 ปีที่แล้ว +7

    I installed your fender eliminator, halo gtr lights, and integrated tail lights easier with your videos on my 2019 r3. Your instructional videos are some of the best step by step videos I have ever used.

    • @tristang2796
      @tristang2796 5 ปีที่แล้ว +1

      ​@Matt Murdock If you are getting one brand new, then break in period teaches you patience. I've also been avoid riding with other riders.
      The bikes stock muffler is loud; surprisingly. Not Akrapovic loud, but still loud at lower rpm's. Even my friends were surprised as my CBR 600rr was very quiet at lower rpm's..
      The bike handles very well even in wet condition with the stock tires. The high beams are VERY bright and the display is one of the best features on the bike as well. I plan on changing out the stock levers to ASV shorty's but that's just personal preference on my end as the long levers are a pain with my hands.
      Many people are surprised that my bike is as R3 when they see the photos I post and overall. I'd recommend this bike to anyone; beginner or experienced as they are just simply fun to ride which has surprised me as I wasn't expecting to enjoy riding her this much.

    • @TSTindustries
      @TSTindustries  4 ปีที่แล้ว

      Thank you. We appreciate your comments. How are the parts working for you a year later?

    • @tristang2796
      @tristang2796 4 ปีที่แล้ว

      @@TSTindustries I have no issues with the parts so far. They are working just as well as when I first bought them so thats an A++ grade.
      The only thing which happened otherwise is vibrations causing one of the fender eliminator screws to come undone; which isnt a big deal and a random woman forcibly bending the eliminator causing one of the screw sides to strip. Its currently being held together with zip ties.

  • @ryanrobichaud3344
    @ryanrobichaud3344 4 ปีที่แล้ว +2

    Installed these tonight. Same bike same color same everything! Very clean look and super easy install thanks to this video! Thanks TST!

    • @TSTindustries
      @TSTindustries  4 ปีที่แล้ว

      Awesome. Glad to see you enjoying our products.

  • @headchefed
    @headchefed 5 ปีที่แล้ว +2

    love the new updated design of the R3 . . . articulate and detailed directions. Thank you for the video, very informational and as a result I feel comfortable to do more of my own work on my bike . . .

    • @TSTindustries
      @TSTindustries  4 ปีที่แล้ว +3

      Thank you for catching all that. We put so much work into these videos and only some people appreciate that.

  • @x1bl0odman
    @x1bl0odman 5 ปีที่แล้ว +3

    Got mine last week. I was very upset I couldn’t finance a new r6 due to insurance costs but dang aren’t I glad I didn’t buy one as my first bike ever. I guess things happen for a reason. I have this exact model and color and absolutely love it.

  • @nearsite
    @nearsite ปีที่แล้ว +1

    Wow, I just did this in 45 minutes including installing the relay. Super easy and the best thing is you don't need to take off the fairings.

  • @ginomaas5854
    @ginomaas5854 5 ปีที่แล้ว +7

    the black version of the r3 looks 10x better! Damm this bike is beautyful

  • @imcisco__1505
    @imcisco__1505 5 ปีที่แล้ว +16

    I can’t wait to start working to get this as my first bike!

    • @brownyonwheels
      @brownyonwheels 4 ปีที่แล้ว +5

      thats some motivation my man, I have an R3. I cant wait to get an R1.

    • @Scoobert2
      @Scoobert2 10 หลายเดือนก่อน

      Did you get it yet ?

    • @imcisco__1505
      @imcisco__1505 10 หลายเดือนก่อน

      @@Scoobert2 yeah, currently riding an 07 Gsxr 600

    • @Scoobert2
      @Scoobert2 10 หลายเดือนก่อน

      @@imcisco__1505 can’t believe you actually replied but hey man congrats on everything

  • @chimricholds4332
    @chimricholds4332 5 ปีที่แล้ว +5

    Love this bike! looks clean and mean with those flush mounts!

    • @TSTindustries
      @TSTindustries  5 ปีที่แล้ว +1

      Thanks for the kind words!

  • @badger0059
    @badger0059 4 ปีที่แล้ว

    Made installation on my matte black 2020 so much easier watching this.
    Thanks :)

  • @aldrinpinheiro9638
    @aldrinpinheiro9638 5 ปีที่แล้ว +1

    They have improved the aerodynamics

  • @dennisgriffith3741
    @dennisgriffith3741 ปีที่แล้ว

    I got them and installed yesterday!! Super bright and Ass! I like the halo running lights. Dip shits can see me coming better!!!

  • @Yokai_Yuri
    @Yokai_Yuri 5 ปีที่แล้ว +1

    A damn...it looks beautiful

  • @zaeldevyon8243
    @zaeldevyon8243 5 ปีที่แล้ว +1

    Best video guide ever. Holy crap. Even I could do it and I've never touched a motorcycle before buying my 19 r3 in my life.

    • @utunum1799
      @utunum1799 4 ปีที่แล้ว +1

      Hows it going follow r3 rider! I just got mine recently, how does it look on yours, brightness wise? Worth it?

    • @zaeldevyon8243
      @zaeldevyon8243 4 ปีที่แล้ว +1

      @@utunum1799 oh yeah. Anything to get rid of those obnoxious hammer head lights. Brightness wise they're honestly super bright.l, even in daylight. The halo option is definitely worth the extra and looks super clean. Halos also turn off when the blinker is in use which is nice. I went full tilt and also got the integrated tail light as well as the fender elimination. TST is top notch, you definitely wont regret it. Good luck modding your bike bro.

    • @utunum1799
      @utunum1799 4 ปีที่แล้ว +1

      For sure bud appreciate it! And definitely getting the integrated taillight and fender eliminator!

  • @baebee23
    @baebee23 2 หลายเดือนก่อน

    So I was trying to do it on my own and then I watched your video and wasted my time taking off the whole side panel 🤣 but your video made it so easy to finish putting it together 😅
    3hrs wasted 😬

  • @DonArma
    @DonArma 3 ปีที่แล้ว

    Very great video 👍🏻.

  • @luise.concepcion8482
    @luise.concepcion8482 4 ปีที่แล้ว

    Excellent, soon make contacts to buy mine, many beautiful accessories for my R3 2019

  • @waiatm
    @waiatm 2 ปีที่แล้ว +1

    I just put some on my r3 today. Install was easy. I don't think I'm even going to add the relay even though I bought it. Probably flashes 105 bpm instead of 85ish and it's sorta perfect.

  • @ashutoshbhure1600
    @ashutoshbhure1600 5 ปีที่แล้ว +2

    good work👍👍

  • @MacMillan1021
    @MacMillan1021 5 ปีที่แล้ว +1

    Hi, I am a buyer from asia and I really love your product!
    May I ask is this product (the 2019 version) available to buy on amazon? As i see the amazon one is fit for 2015-2018 version, is it the same? Also, I dont need the flasher relay. Is it possible to buy the signals pack only on amazon?

  • @yukia2308
    @yukia2308 5 ปีที่แล้ว +9

    gosh that bike looks sweet

    • @JamieS1992
      @JamieS1992 5 ปีที่แล้ว +3

      much better then last gen

    • @FunnyBus3rd
      @FunnyBus3rd 5 ปีที่แล้ว +3

      @@JamieS1992 I know right, so glad I didn't buy it last year

    • @JamieS1992
      @JamieS1992 5 ปีที่แล้ว +1

      @@FunnyBus3rd you lucky im not I got last gen

  • @nssvmedia3580
    @nssvmedia3580 5 ปีที่แล้ว

    Great tutorial just wondering what exhaust is on that r3?

  • @georgevelasco6859
    @georgevelasco6859 4 ปีที่แล้ว

    Dear TST Industries,
    Make it available in Asia specially here in the Philippines.
    You will have a bigger market here since there are lots of motorcycle enthusiast that will spend extra money just to get
    the "Best Product"
    for their bikes!
    And you guys have it👍👌😍

    • @TSTindustries
      @TSTindustries  4 ปีที่แล้ว

      Thank you. I appreciate that. We are looking into expanding to Asia but that has some additional difficulties like shipments getting lost and problems verifying transactions against fraud.

    • @georgevelasco6859
      @georgevelasco6859 4 ปีที่แล้ว

      @@TSTindustries
      80 percent of motorcycle enthusiast here will go online to purchase parts for bike modifications since most of our retailer stores don't have the things we need.
      Shopee is our trusted online store, if you wish to join in the future I can distribute it for you guys.
      Our travel agency is using FedEx in sending and receiving packages worldwide.

  • @lorenzopomponi2615
    @lorenzopomponi2615 5 ปีที่แล้ว +2

    awesome job guys! yamaha's original signals are very bad to see

  • @farishenderson5738
    @farishenderson5738 3 ปีที่แล้ว

    beat goes hard

  • @mujacsthongs4579
    @mujacsthongs4579 5 ปีที่แล้ว +1

    wow it so nice

  • @zidone775
    @zidone775 3 ปีที่แล้ว +1

    Where the flasher relay should be installed? Do you have installation guide?

  • @romeolagardon4041
    @romeolagardon4041 5 ปีที่แล้ว

    I love that halo..

    • @TSTindustries
      @TSTindustries  4 ปีที่แล้ว

      Thank you. We love that our hard work gets appreciated.

  • @Fred-eg9sx
    @Fred-eg9sx 5 ปีที่แล้ว +4

    I lowsided my bike, so stock lights are gone. Gave me a reason to buy these beauties. I need to take off the fairings anyways...

    • @TSTindustries
      @TSTindustries  4 ปีที่แล้ว +1

      Hope the replacements met your expectations

    • @dr.dapperwit9975
      @dr.dapperwit9975 3 ปีที่แล้ว

      Same!! Did you crack your fairings?

  • @Tino-fi2gm
    @Tino-fi2gm ปีที่แล้ว

    Are they compatible with the European model? (most concretely the spanish one) Im planning on getting one but i dont know if it will go ok

  • @r.a7253
    @r.a7253 5 ปีที่แล้ว

    yo those look neat

    • @TSTindustries
      @TSTindustries  5 ปีที่แล้ว +1

      Thanks, they're definitely one of our most popular products.

  • @wellsimon5202
    @wellsimon5202 5 ปีที่แล้ว +1

    Im from philippines and Where can i order this one.. Thanks..

  • @ValentinoPrabhu
    @ValentinoPrabhu 5 ปีที่แล้ว +1

    Will this indicators fix for Yamaha R15 V3.0 2018 model ? If so, kindly give the link to purchase. If not, do you have any or will you make in near future ?

    • @TSTindustries
      @TSTindustries  5 ปีที่แล้ว

      We do not have the R15 here in the USA so we cannot verify fit.

  • @brownyonwheels
    @brownyonwheels 4 ปีที่แล้ว

    How visible are these lights from head on or for the on coming traffic? My concern is people wont be able to see it, since they are so flushed in ?

    • @TSTindustries
      @TSTindustries  4 ปีที่แล้ว

      There isn't a number i can quantify this with. The fairing geometry where tje signals mount is such the it faces both side and front of the bike diagonally. Our signals fit there and fire the light in that diagonal direction so both front and side are lit up. The lens also bulges out but still is continuous with the fairing surface

  • @angshumansarmah6626
    @angshumansarmah6626 5 ปีที่แล้ว +11

    You know what?
    it's still not launched in my country.
    😄

    • @rihanyousaf6671
      @rihanyousaf6671 4 ปีที่แล้ว +1

      INDIAN
      Hope yahama will launch it in 2020....

  • @coltonreynolds4894
    @coltonreynolds4894 2 หลายเดือนก่อน

    I have these, but I’m wondering what the easiest way to remove them is. Selling the bike but converting back to stock

  • @notfake297
    @notfake297 2 หลายเดือนก่อน

    Is there any way to turn off the running light While having the headlights on?

  • @allysyafiq
    @allysyafiq 5 ปีที่แล้ว

    Does is compatible with R3 1st model?

  • @wind8785
    @wind8785 5 ปีที่แล้ว +1

    very good .like

  • @boyetfilm840
    @boyetfilm840 3 ปีที่แล้ว

    I want to grab one for this to my R3

    • @TSTindustries
      @TSTindustries  3 ปีที่แล้ว

      We have them in stock

    • @boyetfilm840
      @boyetfilm840 3 ปีที่แล้ว

      Is it possible to order it? I’m here in Korea

  • @notfake297
    @notfake297 2 หลายเดือนก่อน

    Can you have the glow off and it only glows when you activate the turning signal

  • @williampullar7062
    @williampullar7062 3 ปีที่แล้ว

    so my second clip for the inside part of the bike broke while I was installing it. is there a way that I can use another item to hold it snug or do you guys have a place to buy a replacement part?

    • @TSTindustries
      @TSTindustries  3 ปีที่แล้ว

      We would have to get more info on that. Please contact our customer service department. We will do what we can to help you out.

  • @Skyshiran
    @Skyshiran 5 ปีที่แล้ว

    When new r3 will come in india?

  • @joabdasilvaarmirofurlani6793
    @joabdasilvaarmirofurlani6793 5 ปีที่แล้ว +1

    got it

  • @amados68
    @amados68 3 ปีที่แล้ว

    Gonna be a question not related to this vid but, how often should i change the oil? Is it a certain milage?

    • @TSTindustries
      @TSTindustries  3 ปีที่แล้ว +1

      Some people follow the schedule outlined in their owners Manual. Some do every 3000-3500 miles depending on the oil used. On some of our race bikes with built engines we use good Ester based oils and change every other racing event.

  • @kakiridesc1853
    @kakiridesc1853 5 ปีที่แล้ว

    Can i order this online? Im from Malaysia 😁😁

  • @charlesbong7
    @charlesbong7 5 ปีที่แล้ว +3

    What Camera Did You Use?

  • @shazrilamri2155
    @shazrilamri2155 5 ปีที่แล้ว +3

    What if the asian market need your product...how to proceed order?

  • @ilovepizza8263
    @ilovepizza8263 5 ปีที่แล้ว

    how do you remove the side fairing? how many bolts? i dont think its the same procedure as the older models?

    • @TSTindustries
      @TSTindustries  5 ปีที่แล้ว +1

      The procedures for both are very similar but we do have a specific video that shows the exact steps on the previous generation R3. You can click the link below to watch that video:
      th-cam.com/video/kSrDSJE01YU/w-d-xo.html&t=

  • @jvillain9946
    @jvillain9946 ปีที่แล้ว

    How hard are these to remove if I want to change color or put the OEM lights back on? I haven't installed mine yet because idk if I can use blue lights in my state and don't know how hard they are to remove without breaking them.

    • @TSTindustries
      @TSTindustries  ปีที่แล้ว

      It's tough to describe the answer in words. This is why we make these videos. If you imagine the process portrayed in reverse, you can judge the difficulty of it for yourself.

  • @hossainreza8289
    @hossainreza8289 5 ปีที่แล้ว +1

    💛💛💛💛💛💛

  • @asiansareraisins7582
    @asiansareraisins7582 4 หลายเดือนก่อน

    I know you mentioned in the video this works for models 2015 and up, but I have to make sure; does this work for 2023 model?

    • @TSTindustries
      @TSTindustries  4 หลายเดือนก่อน +1

      Absolutely. The product page also lists the most updated application years. -TST

    • @asiansareraisins7582
      @asiansareraisins7582 4 หลายเดือนก่อน

      @@TSTindustries thank you!

  • @drumskas
    @drumskas 2 ปีที่แล้ว

    You made that look very very hard. I don't know, if it's that hard I might end up paying someone then.

  • @martinphilippbello6451
    @martinphilippbello6451 5 ปีที่แล้ว

    Good day!
    I installed the led lights just today and found a problem on one of the signal light.
    It appeared that the other one on the left side doesn't blink brighter compared to the right.
    I tried a lot of things just to figure out the problem but still it just don't work properly. I think there is a problem on the item itself and I am so dissapointed.

    • @TSTindustries
      @TSTindustries  5 ปีที่แล้ว +1

      We have a customer support team along with warranty to take care of you in case there is a problem with equipment we sell you. There is a chance something is going on with your electrical system preventing full brightness. Please contact our customer support guys through our website. They will go through a quick troubleshooting procedure with you and either lead you to fix the issue or send you a replacement.

  • @nickmas2632
    @nickmas2632 4 หลายเดือนก่อน

    Any info on how to remove the spring zipper lock once it’s on the panel?

    • @TSTindustries
      @TSTindustries  4 หลายเดือนก่อน

      Put light pressure on the lamp from the underside towards the outside. Use a fine flat screwdriver to disengage the detent one side at a time, in progressive small steps until you get a quarter inch or so gap. For me it usually takes 5 to 6 steps until it is loose enough to where I can work it by hand, still prying the detents away from the ratchet face in the lamp.
      -BR

  • @ramraman73
    @ramraman73 3 ปีที่แล้ว

    can these fit R25 yr 2020?

  • @JamisonLong
    @JamisonLong 2 ปีที่แล้ว

    Would this has adverse effects on the battery life
    Or is it not that significant??

    • @TSTindustries
      @TSTindustries  2 ปีที่แล้ว +1

      I don't fully understand your question . I am going to have to speculate to answer it. Your bike comes with oe lamps that have a running light and signal light circuit. They use incandescent bulbs as light source, and draw a good amount of current to light them up. Our signals have the same two circuits but use LEDs as light source, and therefore draw a fraction of the current as compared with OE lamp. The running light is only on when the bike is on, and the signal is only on when the signal switch is initiated. This works the same for oe and our signals.

  • @aldrinpinheiro9638
    @aldrinpinheiro9638 5 ปีที่แล้ว

    How is the top end

  • @brownyonwheels
    @brownyonwheels 4 ปีที่แล้ว

    What if I do not use the Relay ? Does that burn out the Led's ?

  • @ReefCalvetti
    @ReefCalvetti 9 หลายเดือนก่อน

    Muito bom

  • @eligucci
    @eligucci 11 หลายเดือนก่อน

    Would I need the relay for both sides or will 1 do?

    • @TSTindustries
      @TSTindustries  11 หลายเดือนก่อน

      Only one relay is used to control all signals, front/rear/right/left

  • @amados68
    @amados68 3 ปีที่แล้ว

    Can you get these for the 2020 model, or is it basically the same 🤔

    • @TSTindustries
      @TSTindustries  3 ปีที่แล้ว +1

      The 2019 model is the first year of the new generation R3. 2020 is the second year. It is the same bike.

  • @NathanH172
    @NathanH172 5 ปีที่แล้ว +1

    Could you develop an Led turn signal for the ‘16 zx6r?

    • @TSTindustries
      @TSTindustries  5 ปีที่แล้ว +2

      Yes...funny thing is that we are currently working on that.

    • @NathanH172
      @NathanH172 5 ปีที่แล้ว +1

      Well now I can’t wait to see it. :)

  • @yonje9503
    @yonje9503 3 ปีที่แล้ว

    Can i buy this ? I lived in South Korea (Republic of Korea)

  • @ItsKCs
    @ItsKCs 3 ปีที่แล้ว

    Does R3 really that beautiful

  • @aldrinpinheiro9638
    @aldrinpinheiro9638 5 ปีที่แล้ว

    How is the power delivery in 2019 r3 better than 2018

    • @TSTindustries
      @TSTindustries  5 ปีที่แล้ว

      It's pretty much the same bike power wise

  • @motojetr3ph121
    @motojetr3ph121 3 ปีที่แล้ว

    Hi. What do you call that kind of socket in signal light? Coz here in pur country we dont have that kind of socket

    • @TSTindustries
      @TSTindustries  3 ปีที่แล้ว

      By socket, do you mean the electrical connector, or the physical mounting well in the fairing?

    • @motojetr3ph121
      @motojetr3ph121 3 ปีที่แล้ว

      @@TSTindustries the electrical connector itself. What do you call that kind of socket so?

  • @RTK171
    @RTK171 5 ปีที่แล้ว +1

    Look OK but be illegal in Australia I think.?

  • @marvinbernardino4231
    @marvinbernardino4231 2 ปีที่แล้ว

    hey, it can be fit in YAMAHA R15 version 3? thanks..

    • @TSTindustries
      @TSTindustries  2 ปีที่แล้ว

      Unfortunately we do not have access to the R15 in the United States so we cannot confirm or deny fitment and functionality.

  • @mitsurikanroji1686
    @mitsurikanroji1686 21 วันที่ผ่านมา

    Is this the hyper white or warm white glow color?

    • @TSTindustries
      @TSTindustries  21 วันที่ผ่านมา +1

      @@mitsurikanroji1686In this video we show the hyper white running light module.

  • @warrior4life479
    @warrior4life479 ปีที่แล้ว

    I did My one, honestly you don't have to take out the entire part where the indicator is fitted just the top part and the front part both made of plastic they need to be removed.Again the indicator part need not to be removed.I hope my comment isn't upsating anyone.
    Thanks

  • @Ronnie_G
    @Ronnie_G ปีที่แล้ว

    Can other drivers see the turn signals if they’re facing you head on?

    • @TSTindustries
      @TSTindustries  ปีที่แล้ว +1

      There are a few factors that can play into this but in general, yes. These are designed with a convex lens shape to help direct light more forward.

  • @crisuriarte4538
    @crisuriarte4538 ปีที่แล้ว

    how can i order this and the tail light? I'm from Philippines.

    • @TSTindustries
      @TSTindustries  ปีที่แล้ว

      All orders can be placed directly on our website by clicking the link in the description. We ship to the Philippines from our website.

  • @jaredj1160
    @jaredj1160 2 ปีที่แล้ว

    Do you need a flasher relay for both sides?

    • @TSTindustries
      @TSTindustries  2 ปีที่แล้ว

      No, only one relay is needed for your entire bike.

  • @resurrectedbyjorge1606
    @resurrectedbyjorge1606 ปีที่แล้ว

    When it says quantity on the check I ur does it mean a pair or just one signal light 😭?

    • @resurrectedbyjorge1606
      @resurrectedbyjorge1606 ปีที่แล้ว

      Check out *

    • @TSTindustries
      @TSTindustries  ปีที่แล้ว +1

      @@resurrectedbyjorge1606 we sell all signals by the pair. One pair will get you two signals.

  • @rubberduckyy5098
    @rubberduckyy5098 4 ปีที่แล้ว

    How’s visibility from the front at day time?

    • @TSTindustries
      @TSTindustries  4 ปีที่แล้ว

      I would say better than most flush mounted signals on the market. You can look through the comments and also the reviews on our website to get independent opinions.

  • @turcenoarthurjamil4364
    @turcenoarthurjamil4364 4 ปีที่แล้ว

    can this be seen when youre in front of the bike? i mean whe n you are looking at it from the front?

    • @TSTindustries
      @TSTindustries  4 ปีที่แล้ว +1

      Yes but keep in mind that they are flush mounted signals. If you are worried about visibility then I would say go with our BL6 pod signals.

    • @turcenoarthurjamil4364
      @turcenoarthurjamil4364 4 ปีที่แล้ว

      well your product is actually pretty cool

  • @enriquechapman9878
    @enriquechapman9878 5 ปีที่แล้ว

    Hello, do you have it for yamaha mt07?

    • @TSTindustries
      @TSTindustries  5 ปีที่แล้ว

      We have a product specific for the MT line of bikes. Here is a link to the page where you can find it: tstindustries.com/Yamaha-FZ-07-MT-07/
      And here are the installation videos of that product on the MT07: th-cam.com/video/UHRy3q4crAQ/w-d-xo.html , th-cam.com/video/MqDfOIAn4u4/w-d-xo.html

  • @fatbongripz4207
    @fatbongripz4207 ปีที่แล้ว

    ah, so that's why the signal on the right side of my fairing doesn't have the running light anymore. my previous owner already had these, and after i removed the fairing, that little part was dangling and i didn't know what it connected to. i'll have to take off my fairing again and put it back in. the running lights really increase my visibility

    • @TSTindustries
      @TSTindustries  ปีที่แล้ว

      Sounds like an easy enough fix

  • @johnmartin358
    @johnmartin358 7 หลายเดือนก่อน

    How do I remove the locking bit on the blinker light , I forgot to order the halo/running light and install the light before I noticed

    • @TSTindustries
      @TSTindustries  7 หลายเดือนก่อน

      Technically do dont have to remove the signal from the bike, just need access behind it.

    • @johnmartin358
      @johnmartin358 7 หลายเดือนก่อน

      @@TSTindustries on the videos the halo was out ibefore install so does the halo just slide right in , if so how does it lock in

    • @TSTindustries
      @TSTindustries  7 หลายเดือนก่อน +1

      @@johnmartin358 the way i designed the system allows for the halo light source to be changed without removing the signal from bodywork ad long as you have access from back side. On yhe R3 there is access. The light source has a few detents that flex on the way into the housing and pop open into receiving windows

    • @johnmartin358
      @johnmartin358 7 หลายเดือนก่อน

      @@TSTindustries appreciate that response and I’m ordering more parts for my bike coming to y’all again

    • @TSTindustries
      @TSTindustries  7 หลายเดือนก่อน

      @@johnmartin358 alright... Good deal. Cheers and happy holidays

  • @carlemilchua2084
    @carlemilchua2084 4 ปีที่แล้ว

    It doesn't light when i plugged it

  • @sadiqumar4247
    @sadiqumar4247 5 ปีที่แล้ว

    Please tell the exhaust name

  • @rubberduckyy5098
    @rubberduckyy5098 4 ปีที่แล้ว

    How does it look from the front though? Like can a car in front of me see this clearly?

    • @TSTindustries
      @TSTindustries  4 ปีที่แล้ว

      Like with any flushmount signals you lose the protruding part of the signal and the lamps sit flush with your fairing. For maximum visibility but with a changed look from OEM I recommend our BL6 pod signals.

    • @TSTindustries
      @TSTindustries  4 ปีที่แล้ว

      If you still decide that you are interested in the flush version then you can read some of the comments below to get an objective opinions on brightness, directionality, etc.

  • @aimanpiupiu8757
    @aimanpiupiu8757 5 ปีที่แล้ว

    Can do a tutorial for the frame sliders Yamaha r3 2019

    • @TSTindustries
      @TSTindustries  5 ปีที่แล้ว +2

      We don't have a good enough method to convey yet. We will need the bike back in the shop at some point to figure that out and get a video together for you guys.

    • @aimanpiupiu8757
      @aimanpiupiu8757 5 ปีที่แล้ว

      @@TSTindustries ouh alright thanks , can't wait till the tutorial out cause im scared to fall down on my new bike

  • @mizanahmed2549
    @mizanahmed2549 3 ปีที่แล้ว

    Will this fit on 2017 r3?

    • @TSTindustries
      @TSTindustries  3 ปีที่แล้ว

      Yes, and we also have a dedicated 2015-2018 R3 installation video

  • @sembiant9038
    @sembiant9038 5 ปีที่แล้ว

    Is it possible to swap 2019 front fairing to 2015 R3.
    #justcurious

    • @thearider
      @thearider 5 ปีที่แล้ว +1

      Yes its possible

    • @sembiant9038
      @sembiant9038 5 ปีที่แล้ว

      @@thearider have you done it? Should it need some alterations?

    • @thearider
      @thearider 5 ปีที่แล้ว

      @@sembiant9038 no but i saw a video om youtube

    • @sembiant9038
      @sembiant9038 5 ปีที่แล้ว

      @@thearider possible to share the link?

  • @edwlee
    @edwlee 2 ปีที่แล้ว

    Can these be easily removed from the fairing?

    • @TSTindustries
      @TSTindustries  2 ปีที่แล้ว +1

      I consider it very easy. Using two toothpicks you jam open the ratchet tabs on the locking ring and push the signals out from the inside

    • @edwlee
      @edwlee 2 ปีที่แล้ว

      @@TSTindustries Great! Thanks for the quick response!

  • @reylandregis2791
    @reylandregis2791 5 ปีที่แล้ว

    How about crash guard for r3 3019?

  • @iodineclip
    @iodineclip 5 ปีที่แล้ว

    when are you going to show us your R3 top speed on the gps ? :)

    • @TSTindustries
      @TSTindustries  5 ปีที่แล้ว +1

      The Daytona round of CCS and ASRA is coming up soon. We are setting up in the pits tomorrow and will be racing Friday through Sunday. I will have the GPS logger mounted to the bike. Should be able to get you guys some figures after that.

    • @iodineclip
      @iodineclip 5 ปีที่แล้ว

      @@TSTindustries thanks ! looking forward to that :)

  • @uhhdorkable
    @uhhdorkable หลายเดือนก่อน

    What kind of exhaust is that?

    • @TSTindustries
      @TSTindustries  หลายเดือนก่อน

      It’s a Yoshimura exhaust that was sold as a dealership option in select markets. It has “R3” badged on it too. Pretty slick kit.

  • @stephenhart8981
    @stephenhart8981 5 ปีที่แล้ว

    fyi wear some rubber gloves installing these or you wont have any skin left lol. plus look up what the oem lights rubber fastener looks like it will help to locate and have an idea of how to remove them.

  • @1208janc
    @1208janc 5 ปีที่แล้ว

    For FZ/MT-10?

    • @TSTindustries
      @TSTindustries  5 ปีที่แล้ว

      We have the Mech-GTR signals that fit the MT10 model. We will be releasing a MT10 specific kit doon. Here is a video of the installation of Mech-GTR on a MT09 th-cam.com/video/6IJVN5xzK6U/w-d-xo.html

  • @ivanignacio3672
    @ivanignacio3672 หลายเดือนก่อน

    Where can I buy..I'm from Philippines

    • @TSTindustries
      @TSTindustries  หลายเดือนก่อน

      You can visit our website, TSTIndustries.com

    • @ivanignacio3672
      @ivanignacio3672 หลายเดือนก่อน

      @@TSTindustries ok ill try..thank you

  • @Rev_bhp
    @Rev_bhp 5 ปีที่แล้ว

    Can you ship product to India.?

    • @TSTindustries
      @TSTindustries  5 ปีที่แล้ว +1

      We do not.

    • @angshumansarmah6626
      @angshumansarmah6626 5 ปีที่แล้ว

      @@TSTindustries don't worry. We don't have the bike released in India yet 😄

  • @shizi
    @shizi 5 ปีที่แล้ว

    You guys ship in Asia?

    • @TSTindustries
      @TSTindustries  5 ปีที่แล้ว

      We do not. You can see if WeBike has the parts available. They distribute our parts in Asia.

    • @shizi
      @shizi 5 ปีที่แล้ว

      Thanks

  • @J.viss109
    @J.viss109 2 ปีที่แล้ว

    What exhaust is on the bike?

    • @TSTindustries
      @TSTindustries  2 ปีที่แล้ว

      That is a Yoshimura slip-on that was available through Shopyamaha

  • @mfwesley
    @mfwesley 5 ปีที่แล้ว

    We want more Drz400sm parts 😎👍

  • @lisafellers6325
    @lisafellers6325 5 ปีที่แล้ว

    Where do I order these?

    • @TSTindustries
      @TSTindustries  5 ปีที่แล้ว

      The link is in the description but here you go TSTindustries.com

  • @meganlovly4795
    @meganlovly4795 2 ปีที่แล้ว

    How do we pre configure signal system?

    • @TSTindustries
      @TSTindustries  2 ปีที่แล้ว

      Can you expand on your question? I don't understand what you are asking.

    • @meganlovly4795
      @meganlovly4795 2 ปีที่แล้ว

      @@TSTindustries yes sorry, He mentioned if we haven’t already we will need to pre configure the signaling system with the running light. I was wondering if they showed how to do that in the video not sure if I missed it .

    • @TSTindustries
      @TSTindustries  2 ปีที่แล้ว

      @@meganlovly4795 that pre configuration involves installing the halo running light modules if you are working with the Halo version of the signals. That is shown at 2:00