First time I've seen one of your videos, Neil. You did a great job, both on the editing and story, as well as on the project. Tough to do both the project AND the video smoothly. Looks like that pull-type box scraper is perfect for final grading!
Thanks Tim I really appreciate it! Yeah, sometimes it's really tough to figure out what I'm concentrating on more; the video or the actual project! That pull type box is great for finish work and hands down my favorite toy, er I mean "tool" in the shed. Glad you found the video and thanks for the comment. I thoroughly enjoy your channel for sure so pleasantly surprised to see you here. Take care!
@@digdrivediy I also just found your channel. Subscribed. As a budding TH-camr, I find it really difficult to focus more on the filming aspect. Seems like I'd rather get the work done, and the video is secondary. But I do enjoy making them! I find your content, your editing, shot placement, everything, as something to strive for in my videos! Good work!! And thank you.
Pro tip: put a cb radio in your bobtail and look for a sign when you’re coming in to a quarry. It’ll say loaders on channel such and such. It makes it a lot easier when you haven’t been to a particular quarry or building supply. Things change an awful lot around those places and the scale lady may not always know what’s going on. Be safe and good job 👍
I continue to rewatch your videos especially when you are using your infamous box blade process! You do driveways so well! I love watching and learning!
The aireal shots with the drone (?) are wonderful. It gives a real overview of what you are accomplishing. These videos are very interesting. Thank for sharing.
Pro tip: to help ease the issue of not having an air tailgate, buy yourself a long dog leash. Loop it around the handle, raise the bed up about halfway or so (enough to load the tailgate) start rolling just a little and give that dog leash a swift tug. You’ll hear the stone coming out then you’ll know it’s time to shoot the fuel and raise the bed up a little more. Just a friendly tip from a guy who can tail gait with a tractor trailer. 👍🏽
Whenever i need my driveway additction to be taken care, i ALWAYS come to your channel and content. You are hands down rhe best, hall famer, the goat! I need to come and learn!
Another great video from a great channel! I always love driveway repair and refreshes, and you sir have the best in the US. So watching you work on others is a pleasure and a great teachable moment. Thanks for sharing your wisdom and expertise...... make more of these videos!
Hey thanks Brock! That pull type grader box is the best implement I have. Hoping to build a bigger one this fall or winter for the bigger tractors. Yeah, that pro tip is a throw back to my excavating days. My boss would say stuff like that all the time and he hated moving dirt or stone twice!
Thanks for telling about checking your tailgate my boss always told us it does not take but a second to walk back and check your tailgate and the tail board. Take a rag and wipe tour tail lights off from gravel yard and road. He said to do it after filling and dumping . And get in a habit turning your flasher to make sure lights work. He wanted his trucks to b safe
I remember a product dumped on my street that looked like bluestone but it compacted down to a new road surface with no roller, just car traffic. Nice job
"Every day" 😂 since I made a muddy incline into a gravel drive I watch videos on it afterwards. 14 tonnes shovelled and raked alone no machines. I love watching the machines do the work. Gauging 30 mins of my work to 3 seconds of machine.
Everybody forgets wheel pack. I use my pickup because PSI is higher than any tractor but would do it like you if needed. Great work. Dealing with those culverts wasn't easy especially without transition ends.
Great catch Tom! I usually try to wheel pack everything. When available I usually fill the bucket with material to increase that PSI on the tractor. Thanks for the kind words and appreciate you watching!
I get the same feeling at the gravel pit you do. You want to make it easy for the loader but because you are not there a lot, you are unsure. I did have a bad experience once where (it was my fault) in that I misjudged my surroundings behind me, did not get the truck where he wanted and got "beeped" a few times until I did. The next time I was there, same loader and operator, I could tell there was no "grudge" held. It never happened that bad again, but I always remember that time when I go to get loaded. I like your channel a lot! I relate to every thing you do.
Wow, I appreciate you saying all that very much. That quarry that I go to has had the same loader operator there since my first trip that I can remember back in 1995. His name is Tommy. You're spot in with your description though still! Thanks for sharing your story and for checking out the video Richard.
@@digdrivediy Neil, I am it even going to lie to you, I have viewed this video at least 100 times! So we'll out together and the steps to make your driveway look like that is phenomenal!
This is a very labor intensive video, lots of editing involved and it shows.....some great camera work with different angles and drone shots.....really enjoyable and the gravel work looks good too! 😁 Thanks for posting
I am very grateful for the kind words. It is a fair bit of work and it is rewarding to read a comment like this. I really enjoy making the videos as well as doing the projects and I'm humbled that folks are willing to watch. Thanks as always MrmikeyD for your support of the channel.
You're right, the edit can be very time consuming. I'm hardly a pro yet but I appreciate the compliment and really enjoy trying to keep it interesting. Thanks for watching!
Interesting process at the gravel pit. Here in Oregon we go straight up the hills to a quarry and pay by the yard, simply state rip rap, 3", 3/4 minus, etc.
It looks great Neil. Both the driveway and the video. My clone would be grading the edges before I get to them with the tractor. Grade 18 inches out from all edges and it makes the tractor guys job much easier. This comes from nearly 3 decades of concrete work....15 years full time. The angle you set your box blade when you hook it up has a impact on how aggressive it scrapes or floats. Don't be afraid to experiment.
Thanks! That would be a smart way to do this too, to treat it kinda like pouring concrete. If my clone had been on this job I would have had him on the rake the entire time! Always appreciate anytime there is experience talking and providing feedback so I think you much for the box blade advice. I don't play around with the top link action as much as I should so that is a good thing to keep in mind. That would be a great topic for a video and I bet someone has done it. I would probably get impatient though and hop on the other tractor and finish! 😄 Thanks for watching and the helpful tips and ideas. I should experiment a bit more for sure. Take care.
I like this video! I operate the same way. Full time job with side jobs like this, grabbing stone on lunch and running to jobs after work or the weekends to stay on top. I remember my first drive way job was a lot of trial and error. Done enough now to get some food technique as well as how to bill. Great video.
Thanks Ryan! Sounds like we would get along just fine. I'm always trying to take advantage of any spare time in the day it seems. Just had another lunch time job on my most recent video today. Appreciate you watching.
Great Job Neil ! I subbed & liked your channel. Those little sub-compact tractors are the way to go. They are very nimble and can get into these smaller driveways with ease. Keep putting out the videos too! Great Job!
Thanks so much Larry! I appreciate the sub and having you take the time to watch some videos of mine. I love these little tractors. Plenty more to do with them this summer so stay tuned!
Every Day, cool show, the music cut ins too. Loved the edits because most shows about this are 45min long and a no no for me 10-15min is perfect. Thumbs up and sub-ed. Thanks!
@@digdrivediy I bet those granite? edges the owner put in could transition nicely to the inlet and outlet of the pipe near the main road. Use them like pavers where the most erosion would occur then back up to the main road. Maybe suggest it to the owner and offer a price if he isn't able to do it. Nice weekend job for you! Good Luck and thanks for the reply.
Neil, great to watch how to do it. I’m in middle of doing my own power grader per your plans on TH-cam. It’s a great project and looking forward to getting it completed and working with it.
I had Miller Quarry from nearby pour gravel mixed with lime (packs down great) and he overlapped the center area while dumping gravel and after driving over it in time it is firm and the driveway has a crown in the middle that moves rain away. No puddles and lasts years without adding new gravel. I used to use my skid steer to spread it out, but Miller does such a precise job of pouring I don't need it any more other than some touch up areas near buildings.
Pro tip for your tailgate, I use a short rope I keep behind my seat, I use to singe it to my handle and pull the tailgate from the seat using the rope, while the bed is in the air... works quite well!
Had a few other pros suggest that tip as well. I've got a nice piece of rope all picked out and ready to try on my next opportunity. Don't know why I didn't think of that! :) Appreciate you watching and commenting Adam. Take care!
Nice job Neil, I had the same problem with my old dumper, I put a rope attached to my tailgate release, so I could pull it from the cab when I was ready, worked great.
I should have known to bring a rope along. I've played that trick before but wasn't prepared I guess and didn't plan very well. That is a great idea. Thanks for the tip and as always, appreciate you watching John.
Neil, sir, been watching your channel for a month or so and thoroughly enjoyed every episode so far. Thank you for that. I also watch a channel called Mustie1. You might pick up a few pointers on small to medium engine repair along with carb adjustments and the like. Hope this tip helps. P.s. thanks for the "watch wes work" recommendation. Take care, and all the best
Haha! I knew someone had to know where that came from. It is so simple but true. Thanks as always for watching Tony. Feels like I haven't seen you in forever.
Sugar beet farmers used this before Round Up Ready beets, have gauge wheels front and back of their cultivator, with the chain top link the cultivator was not affected by changes in ground height.
I have a John Deere 54C Centerblade for my John Deere 300 my dad bought this tractor with all the attachments and one of these attachments is a very very rare John Deere 54 C Center blade and it does the same job as the blade that you have on the back for a gravel
Neil, you much invest in a tow behind roller/compactor. As a full size grader operator, I always finish my tasks with a compator which gives it a fantastic look. You won't regret it my friend. Good luck...(Simon V.)
Top notch work Neil! Thanks for the shoutout too! I’m the same way when I spread with the truck I think about you lol. Your videos are fantastic, love the editing and everything you do. Keep up the great work and this channel will definitely keep growing. 👍🏻 oh yes everyday I wish I had a clone lol
Thanks a ton Brandon. I appreciate the kind words and glad that you caught this bit in the video. I'm thankful for you supporting my efforts here and hope we run into each other some day. See you over on your channel!
Every Day!. Made it through all your more recent stuff and now enjoying the older projects that keep popping up on my stream. Question for you - I've got a gravel driveway with concrete curbs (at lawn grade), and I'm preparing to do a refresh of the gravel because I have weeds and moss all over. How close would you typically fill up to the top of the curb? I feel like there must be a sweet spot between going too deep and having gravel spill over versus too low and creating a 'trap' for weed and grass seeds to pile up and start growing on the edges. Thanks!
A back blade or landscape rake with rear gage wheels and angling capability works good for leveling rock also. Does a good job of evening the spread thickness.
Dang, I replied to this first thing this morning too but it must not have posted. You're more than welcome on the video. I'm grateful that you're here to watch and comment. Thanks for the support of the channel!
Pro tip: on JD without a cutting edge or lip on the underside of the loader bucket rotate all the way up till the bucket stops then set the bucket down and put it in float and back drag for final passes to dress it up. As you get to the end of the pass bump the bucket to roll down a few inches while still floating and as your pile of materal dissipates under the bucket lift loader straight up. That will fill and pack any low spots and level the high spots. Not as easy as a skid steer but will turn out nice with some practice
Pretty cool how you did the tailgate on that dump truck there for a while I thought you were going to make the hook so you can just take the tailgate off
Great job on that driveway! I know that grading a driveway like that isn't as easy as it looks on video. I've been helping a neighbor with his dirt driveway and it takes a lot of patience.
Great job on your videos. I’ve got the same PJ tilt trailer and have experienced the same issue with loading two tractors. I’ve been considering integrating a manual hand pump into the hydraulics on mine that would allow me to extend the hydraulic cylinder further. I don’t load two things very often, though. It’s a great trailer.
I'm glad I'm not the only one. This trailer has frustrated me many times when trying to either load two items, or when loading a car and the front starts to go down and the tail raises up in front of the rear wheels. The valve lock doesn't hold it in place! Have you had any luck with that? I love the trailer otherwise but it just tips too much when I don't want it to!
Thanks Patrick. So very true! I spend longer on each video than I do the actual job it seems. I think some people might feel I have a screw loose! It's good fun though as i enjoy the video process!
I just left a job at a scale company where I often checked those truck scales at the gravel and asphalt plants. Those places can be a maze and i always feel like I look like an idiot driving around so you’re not alone.
Same. One of our quarries is a disaster to say the least. Lol. The other one, is a dream. Set up in a gigantic circle with signs at each like. So easy. Problem is they charge way more than anyone else for the same material. Because of this, we find ourselves at the unorganized one way more often.
It is interesting how you build a road in your area. Here in eastern Pa we dig out the road bed install ballast and top with a layer of modified. If you drug my 1100 foot drive with that box you would pull up a lot of ballast. It would not work. The ballast creates drainage and a solid base. The modified stays put partly because it is only a couple of inches thick and partly because the fines hold it. Don't get me wrong I have a backhoe and always have a pile of modified and I do yearly maintenance on the road.
We do our driveways very similar to how you described as well. This particular driveway already had the ballast or "base" installed and i was just topcoating. So, I think more similar when building out a new driveway. Check out this one I did a few years ago for how we would build one from scratch: th-cam.com/video/cv9lmZa71dk/w-d-xo.html Thanks for the comment. I love hearing about how other folks do this kinda thing.
My neighbor was a firefighter for 30 years and u know those guys. He had a electrical license plumbing license and god only knows what else and he was so humble of a person. After he retired from the fire department the county commissioner ask him if he would come to work for the as a safety guy. He was all ready the emergency manigment and the only paid officer but had close to 100 volunteers. He accepted the job and the insurance dropped immediately over a 100 grand a year. He kinda knew what was going on with each 3 district and he would drive different vehicles all the time so we never knew what he would b in. Every month at r meetings he would say I found 37 no blinkers and 14 dirty tailboard and 17 dusty as where u couldn’t see them brake lights. On and on. But he would always say we pay u to be safe so after u dump just walk around your truck and take a rag and tidy things up befor u get out on the road
Makes a lot of sense. I always try to look before and after a load when hauling with the dump truck so that I don't have a loose stone makes it's way into someone else's windshield. I learned that lesson the hard way about 25 years ago! Retired firefighters always seem like good guys that have a good handle on how things should be. Your neighbor sounds like he fits the description. Thanks for watching Randy!
Thank you so much for your videos. I am starting up a side business offering driveway repair and maintenance. All I can afford right now, and only because I found them used, is a lawn tractor, a gravel grader attachment for lawn tractors, and a trailer to haul them. So I'm choosing my jobs wisely, where I can dig up existing gravel (reclaim) along with braking up the pot holes and then grade. Any suggestions would be greatly appreciated. Thank you once again.
Just subscribed to your channel. Saw you on TTWT. I'm a few videos in so far and enjoy your content. I love the 318 GT's, I have one fully restored as a toy. I have JD and Kubota equipment. I like both.
Great vid and info... Thanks! I estimate mostly residential driveways (500 sf > 25k sf), all day / every day, for a small asphalt paving co. I still can't decide what the best / worst 'driveway' is... ashalt, concrete, pavers or gravel. I know what the cheapest is... that's for sure. Curious to know how the edging blocks were set / installed?
First time I've seen one of your videos, Neil. You did a great job, both on the editing and story, as well as on the project. Tough to do both the project AND the video smoothly.
Looks like that pull-type box scraper is perfect for final grading!
Thanks Tim I really appreciate it! Yeah, sometimes it's really tough to figure out what I'm concentrating on more; the video or the actual project! That pull type box is great for finish work and hands down my favorite toy, er I mean "tool" in the shed. Glad you found the video and thanks for the comment. I thoroughly enjoy your channel for sure so pleasantly surprised to see you here. Take care!
@@digdrivediy I also just found your channel. Subscribed.
As a budding TH-camr, I find it really difficult to focus more on the filming aspect. Seems like I'd rather get the work done, and the video is secondary. But I do enjoy making them!
I find your content, your editing, shot placement, everything, as something to strive for in my videos! Good work!! And thank you.
Qqqqq
Qqqqq
Qqqqq
This is the first gravel driveway I've seen that looks clean and decent. The homeowner is smart..edges matter to the overall look, for real.
It did look nice with those edges done. Appreciate the comment!
Pro tip: put a cb radio in your bobtail and look for a sign when you’re coming in to a quarry. It’ll say loaders on channel such and such. It makes it a lot easier when you haven’t been to a particular quarry or building supply. Things change an awful lot around those places and the scale lady may not always know what’s going on. Be safe and good job 👍
I have a handheld CB for this very reason! Just didn't have it with me dang it 😂 Great tip Philip and thanks so much for watching and commenting!
I continue to rewatch your videos especially when you are using your infamous box blade process! You do driveways so well! I love watching and learning!
Rewatch! What's so impressive about this video is that Neil work so clearly and efficiently! And he's doing this project by himself! 😊
The aireal shots with the drone (?) are wonderful. It gives a real overview of what you are accomplishing. These videos are very interesting. Thank for sharing.
Every day.
I have lived in Montana for the last 22 years but am from Harlan, In. Great video!
That's cool. Great to hear from you Chuck!
Pro tip: to help ease the issue of not having an air tailgate, buy yourself a long dog leash. Loop it around the handle, raise the bed up about halfway or so (enough to load the tailgate) start rolling just a little and give that dog leash a swift tug. You’ll hear the stone coming out then you’ll know it’s time to shoot the fuel and raise the bed up a little more. Just a friendly tip from a guy who can tail gait with a tractor trailer. 👍🏽
That's awesome and great advice! I've tried it before but never perfected yet. I'm looking forward to more practice though! Thanks for watching!
I love spreading gravel. Instantly gratifying. Nice job.
I love it too!
Whenever i need my driveway additction to be taken care, i ALWAYS come to your channel and content. You are hands down rhe best, hall famer, the goat! I need to come and learn!
Another Master class on driveway care and upkeep by the McGyver of TH-cam! You are the best sir! Love this video, content and channel!
Another great video from a great channel! I always love driveway repair and refreshes, and you sir have the best in the US. So watching you work on others is a pleasure and a great teachable moment. Thanks for sharing your wisdom and expertise...... make more of these videos!
I am ready for some new content in 2024! Love your channel and content! My absolute favorite channel!
Working on it!
You think it "turned out pretty good"? No, it turned out perfect. Great job. BRAVO
Great video. I like the pull type grader box you used
The pro tip at the 10:45 second mark was straight fire
Hey thanks Brock! That pull type grader box is the best implement I have. Hoping to build a bigger one this fall or winter for the bigger tractors.
Yeah, that pro tip is a throw back to my excavating days. My boss would say stuff like that all the time and he hated moving dirt or stone twice!
Thanks for telling about checking your tailgate my boss always told us it does not take but a second to walk back and check your tailgate and the tail board. Take a rag and wipe tour tail lights off from gravel yard and road. He said to do it after filling and dumping . And get in a habit turning your flasher to make sure lights work. He wanted his trucks to b safe
That is great advice! I always try to check for loose stones. Thanks for watching!
Your attention to detail is on another level!
I remember a product dumped on my street that looked like bluestone but it compacted down to a new road surface with no roller, just car traffic. Nice job
That sounds like good stuff. Thanks for watching!
"Every day" 😂 since I made a muddy incline into a gravel drive I watch videos on it afterwards. 14 tonnes shovelled and raked alone no machines. I love watching the machines do the work. Gauging 30 mins of my work to 3 seconds of machine.
Everybody forgets wheel pack. I use my pickup because PSI is higher than any tractor but would do it like you if needed. Great work. Dealing with those culverts wasn't easy especially without transition ends.
Great catch Tom! I usually try to wheel pack everything. When available I usually fill the bucket with material to increase that PSI on the tractor. Thanks for the kind words and appreciate you watching!
I get the same feeling at the gravel pit you do. You want to make it easy for the loader but because you are not there a lot, you are unsure. I did have a bad experience once where (it was my fault) in that I misjudged my surroundings behind me, did not get the truck where he wanted and got "beeped" a few times until I did. The next time I was there, same loader and operator, I could tell there was no "grudge" held. It never happened that bad again, but I always remember that time when I go to get loaded. I like your channel a lot! I relate to every thing you do.
Wow, I appreciate you saying all that very much. That quarry that I go to has had the same loader operator there since my first trip that I can remember back in 1995. His name is Tommy. You're spot in with your description though still! Thanks for sharing your story and for checking out the video Richard.
Those little Deere’s are nice. I have a 322 gas and 430 diesel. They’re fun little toys. Nice job!
Good job. Like to watch differed methods of doing things. Makes me want to go out and buy a pull type grader!
I love what your doing. The way think is just the way I think. I believe God is blessing the work of your hands. Jim Zona west babylon ny
Grzat video, grear work being done. Love yojr attenrion to dtails!
I continue to marvel at your attention to details and your organizing skills!
Neil, if not the best one of the all time best videos I have watched on TH-cam! I love it!
You're too kind Aaron!
@@digdrivediy Neil, I am it even going to lie to you, I have viewed this video at least 100 times! So we'll out together and the steps to make your driveway look like that is phenomenal!
It took me so many trips to the quarry to be comfortable lol. Now they are all pretty cool.
Haha! Glad I'm not the only one :)
This is a very labor intensive video, lots of editing involved and it shows.....some great camera work with different angles and drone shots.....really enjoyable and the gravel work looks good too! 😁 Thanks for posting
I am very grateful for the kind words. It is a fair bit of work and it is rewarding to read a comment like this. I really enjoy making the videos as well as doing the projects and I'm humbled that folks are willing to watch. Thanks as always MrmikeyD for your support of the channel.
I’m new to the TH-cam videos but I’ve learned it’s harder to edit the videos than do the work! This guy is a talented pro!
You're right, the edit can be very time consuming. I'm hardly a pro yet but I appreciate the compliment and really enjoy trying to keep it interesting. Thanks for watching!
Interesting process at the gravel pit. Here in Oregon we go straight up the hills to a quarry and pay by the yard, simply state rip rap, 3", 3/4 minus, etc.
Using that old equipment is what drives me to continue to watch your channel.
Awesome!
Well you're in luck! I like making the old stuff keep going. Plus I can't afford anything with shiny paint!! Thanks for joining in on the fun.
@@digdrivediy wouldn't be here if it were new equipment
It looks great Neil. Both the driveway and the video. My clone would be grading the edges before I get to them with the tractor. Grade 18 inches out from all edges and it makes the tractor guys job much easier. This comes from nearly 3 decades of concrete work....15 years full time. The angle you set your box blade when you hook it up has a impact on how aggressive it scrapes or floats. Don't be afraid to experiment.
Thanks! That would be a smart way to do this too, to treat it kinda like pouring concrete. If my clone had been on this job I would have had him on the rake the entire time! Always appreciate anytime there is experience talking and providing feedback so I think you much for the box blade advice. I don't play around with the top link action as much as I should so that is a good thing to keep in mind. That would be a great topic for a video and I bet someone has done it. I would probably get impatient though and hop on the other tractor and finish! 😄 Thanks for watching and the helpful tips and ideas. I should experiment a bit more for sure. Take care.
I like this video! I operate the same way. Full time job with side jobs like this, grabbing stone on lunch and running to jobs after work or the weekends to stay on top. I remember my first drive way job was a lot of trial and error. Done enough now to get some food technique as well as how to bill. Great video.
Thanks Ryan! Sounds like we would get along just fine. I'm always trying to take advantage of any spare time in the day it seems. Just had another lunch time job on my most recent video today. Appreciate you watching.
I wish I had a clone almost everyday! Another nice job Neil.
Thanks so much. Appreciate you watching!
Love your videos keep up the good work I learn something new every time I watch.
Great Job Neil ! I subbed & liked your channel.
Those little sub-compact tractors are the way to go. They are very nimble and can get into these smaller driveways with ease. Keep putting out the videos too! Great Job!
Thanks so much Larry! I appreciate the sub and having you take the time to watch some videos of mine. I love these little tractors. Plenty more to do with them this summer so stay tuned!
Simoly you are the BEST Neil!
Every Day, cool show, the music cut ins too. Loved the edits because most shows about this are 45min long and a no no for me 10-15min is perfect. Thumbs up and sub-ed. Thanks!
I really appreciate that feedback Jim! Glad to have you watching and thanks for the sub.
@@digdrivediy I bet those granite? edges the owner put in could transition nicely to the inlet and outlet of the pipe near the main road. Use them like pavers where the most erosion would occur then back up to the main road. Maybe suggest it to the owner and offer a price if he isn't able to do it. Nice weekend job for you! Good Luck and thanks for the reply.
@@qjimq That would look really nice. Nice idea for them!
Another amazing job. I have a large gravel driveway and I love watching your work. Gives me ideas
This stuff is so fun to me. Hope you enjoy it like I do. Thanks Verle!
Neil, great to watch how to do it. I’m in middle of doing my own power grader per your plans on TH-cam. It’s a great project and looking forward to getting it completed and working with it.
That's awesome Doug! Best of luck to you.
I had Miller Quarry from nearby pour gravel mixed with lime (packs down great) and he overlapped the center area while dumping gravel and after driving over it in time it is firm and the driveway has a crown in the middle that moves rain away. No puddles and lasts years without adding new gravel. I used to use my skid steer to spread it out, but Miller does such a precise job of pouring I don't need it any more other than some touch up areas near buildings.
Nice having a bit of crown. This driveway has a nice crown although it doesn't show up well in the video. Appreciate you watching 👍🏻
I’m dying to have a clone to work with at my job right now lol awesome job btw, thanks for sharing. Have a blessed day ❤️🙏❤️
Hey thanks so much for watching. Good luck with that clone. I'll take one too!
Having done a few driveways myself, you sure do make it look easy.
Thanks Mike. I appreciate that. I've worked on a few as well :)
Pro tip for your tailgate, I use a short rope I keep behind my seat, I use to singe it to my handle and pull the tailgate from the seat using the rope, while the bed is in the air... works quite well!
Had a few other pros suggest that tip as well. I've got a nice piece of rope all picked out and ready to try on my next opportunity. Don't know why I didn't think of that! :) Appreciate you watching and commenting Adam. Take care!
Everyday - to the clone question. Great camera work and editing as usual!
Thank you for the kind words sir and thanks for contributing with your comments. Always much appreciated.
Nice job Neil, I had the same problem with my old dumper, I put a rope attached to my tailgate release, so I could pull it from the cab when I was ready, worked great.
I should have known to bring a rope along. I've played that trick before but wasn't prepared I guess and didn't plan very well. That is a great idea. Thanks for the tip and as always, appreciate you watching John.
Neil, sir, been watching your channel for a month or so and thoroughly enjoyed every episode so far. Thank you for that.
I also watch a channel called Mustie1.
You might pick up a few pointers on small to medium engine repair along with carb adjustments and the like.
Hope this tip helps.
P.s. thanks for the "watch wes work" recommendation.
Take care, and all the best
Cool, thanks
Great job. Like your dump truck.
Thanks Ron. I really like this truck too!
Hello, sent over by Neil. Glad to be here.
Nice job, and I loved the comment at the end about the free grazing mini excavator!
Hey thanks Randy! And I appreciate hearing that someone caught that at the end! 😋 Thanks for watching.
Excellent result!
EVERY DAY!!! Another nice looking project. I did get the Paul Baughman reference from the Pro Tip ;)
Haha! I knew someone had to know where that came from. It is so simple but true. Thanks as always for watching Tony. Feels like I haven't seen you in forever.
Sugar beet farmers used this before Round Up Ready beets, have gauge wheels front and back of their cultivator, with the chain top link the cultivator was not affected by changes in ground height.
For the sweepster broom that would be great!
Come out to Cali you'd be making bank, out here Mostly all done by hand tools, Awesome video Man !
Really appreciate it! Cali sounds really nice about now as we start to look for our winter coats and snow shovels! Thanks for watching.
Love the battery powered wireless innovation. Definitely looking into one of these in the future (if I don’t win it🤣)
Everyday, so i don't have to go to work! Love the channel!
Thanks Josh! Yeah, that would be a great use of a clone! Appreciate the comment!
Looks great. Love those JD sub compacts👍🏼
Just wish we had kit like that in the U.K. for this type of job. Have sub to the Chanel great video.
Thanks so much!!!
I have a John Deere 54C Centerblade for my John Deere 300 my dad bought this tractor with all the attachments and one of these attachments is a very very rare John Deere 54 C Center blade and it does the same job as the blade that you have on the back for a gravel
Great job neil. You made it look easy.
Thanks Kory! I've had a few opportunities to practice is all!
captain Kleeman sent me here- good video thanks
Neil, you much invest in a tow behind roller/compactor. As a full size grader operator, I always finish my tasks with a compator which gives it a fantastic look. You won't regret it my friend. Good luck...(Simon V.)
Great idea
Hydraulics work good for the tailgate release on your truck! We run them on our trucks they work so good!
Not a bad idea Brody! How did you plumb that in and did you incorporate a valve in the cab for it? I was hoping to use a pneumatic actuator.
@@digdrivediy yes we put a hydraulic valve in the cab for the gate pins and for the box cylinder
Also we routed them from the back of the cab through the floor
Looks good. You should consider adding a hydraulic top link on your big JD, makes life so much easier.
Thanks Douglas. That's not a bad idea. I've been wanting to add the power beyond so may look into that some day.
if you are curious the big boy JD is using a sub-soiler to loosen the compaction from the fall harvest.
Spot on! I keep meaning to ask him if he saw the drone buzzing him that day. Or hope that he sees this.
Top notch work Neil! Thanks for the shoutout too! I’m the same way when I spread with the truck I think about you lol. Your videos are fantastic, love the editing and everything you do. Keep up the great work and this channel will definitely keep growing. 👍🏻 oh yes everyday I wish I had a clone lol
Thanks a ton Brandon. I appreciate the kind words and glad that you caught this bit in the video. I'm thankful for you supporting my efforts here and hope we run into each other some day. See you over on your channel!
@@digdrivediy you bet and I appreciate your kind words. It would be great to meet some day
Nice shout out. Two top notch guys!
Thumbs up for the JD 755. Love mine
Boy, they sure are handy little tractors. Did you see my other 755 blowing snow? Just great little tractors.
Slidin rock with the best of them
Oh yeah!
Excellent work on the drive, looks great!! Love to see you use the old-skool Deere's, I'm a fan of those.
Thank you! I'm a big fan of them too! Appreciate you watching and commenting!
Every Day!. Made it through all your more recent stuff and now enjoying the older projects that keep popping up on my stream. Question for you - I've got a gravel driveway with concrete curbs (at lawn grade), and I'm preparing to do a refresh of the gravel because I have weeds and moss all over. How close would you typically fill up to the top of the curb? I feel like there must be a sweet spot between going too deep and having gravel spill over versus too low and creating a 'trap' for weed and grass seeds to pile up and start growing on the edges. Thanks!
A back blade or landscape rake with rear gage wheels and angling capability works good for leveling rock also. Does a good job of evening the spread thickness.
I'd like to try a landscape rake some day. They look handy. Thanks for the comment.
Good morning Neil, you're up early. Thanks for the video, I was in need of some quality entertainment this morning.
Dang, I replied to this first thing this morning too but it must not have posted. You're more than welcome on the video. I'm grateful that you're here to watch and comment. Thanks for the support of the channel!
Pro tip: on JD without a cutting edge or lip on the underside of the loader bucket rotate all the way up till the bucket stops then set the bucket down and put it in float and back drag for final passes to dress it up. As you get to the end of the pass bump the bucket to roll down a few inches while still floating and as your pile of materal dissipates under the bucket lift loader straight up.
That will fill and pack any low spots and level the high spots. Not as easy as a skid steer but will turn out nice with some practice
Excellent video!
Thank you Duke.
Great job Neil !!
Pretty cool how you did the tailgate on that dump truck there for a while I thought you were going to make the hook so you can just take the tailgate off
Very nice finished job mate👍
Appreciate it! Thanks for watching!
Great work!!! Thanks for the video!
Great job on that driveway! I know that grading a driveway like that isn't as easy as it looks on video. I've been helping a neighbor with his dirt driveway and it takes a lot of patience.
Thanks Luke!
Haha... I like the pro tip👍
😁 Seems obvious but so many people don't consider it!
Great job on your videos. I’ve got the same PJ tilt trailer and have experienced the same issue with loading two tractors. I’ve been considering integrating a manual hand pump into the hydraulics on mine that would allow me to extend the hydraulic cylinder further. I don’t load two things very often, though. It’s a great trailer.
I'm glad I'm not the only one. This trailer has frustrated me many times when trying to either load two items, or when loading a car and the front starts to go down and the tail raises up in front of the rear wheels. The valve lock doesn't hold it in place! Have you had any luck with that? I love the trailer otherwise but it just tips too much when I don't want it to!
First time on your channel. Enjoyed watching your attention to detail and neatness. Might need one of those graders for my PT-30!
Thanks for the kind words. Those types of graders are great in my opinion so I bet you'd love it. Thanks for giving the channel a chance!
Great job. I have to hand it to the TH-cam creators. I find there’s more work in the editing of videos than the project sometimes.
Thanks Patrick. So very true! I spend longer on each video than I do the actual job it seems. I think some people might feel I have a screw loose! It's good fun though as i enjoy the video process!
Great job. Very professional
Thanks Tony! I love projects like this!
Looks great 👍
Thanks a lot!
Nice driveway work
Came over from My Cluttered Garage Live Stream
And subbed up to my fellow Hoosier !
Hey thanks so much! Glad to have you on board. Always room for another Hoosier!
I just left a job at a scale company where I often checked those truck scales at the gravel and asphalt plants. Those places can be a maze and i always feel like I look like an idiot driving around so you’re not alone.
I'm glad to have you tell me that Alex! They are a maze, especially when going through your first time! Thanks for the comment!
Same. One of our quarries is a disaster to say the least. Lol. The other one, is a dream. Set up in a gigantic circle with signs at each like. So easy. Problem is they charge way more than anyone else for the same material. Because of this, we find ourselves at the unorganized one way more often.
It is interesting how you build a road in your area. Here in eastern Pa we dig out the road bed install ballast and top with a layer of modified. If you drug my 1100 foot drive with that box you would pull up a lot of ballast. It would not work. The ballast creates drainage and a solid base. The modified stays put partly because it is only a couple of inches thick and partly because the fines hold it. Don't get me wrong I have a backhoe and always have a pile of modified and I do yearly maintenance on the road.
We do our driveways very similar to how you described as well. This particular driveway already had the ballast or "base" installed and i was just topcoating. So, I think more similar when building out a new driveway. Check out this one I did a few years ago for how we would build one from scratch: th-cam.com/video/cv9lmZa71dk/w-d-xo.html
Thanks for the comment. I love hearing about how other folks do this kinda thing.
My neighbor was a firefighter for 30 years and u know those guys. He had a electrical license plumbing license and god only knows what else and he was so humble of a person. After he retired from the fire department the county commissioner ask him if he would come to work for the as a safety guy. He was all ready the emergency manigment and the only paid officer but had close to 100 volunteers. He accepted the job and the insurance dropped immediately over a 100 grand a year. He kinda knew what was going on with each 3 district and he would drive different vehicles all the time so we never knew what he would b in. Every month at r meetings he would say I found 37 no blinkers and 14 dirty tailboard and 17 dusty as where u couldn’t see them brake lights. On and on. But he would always say we pay u to be safe so after u dump just walk around your truck and take a rag and tidy things up befor u get out on the road
Makes a lot of sense. I always try to look before and after a load when hauling with the dump truck so that I don't have a loose stone makes it's way into someone else's windshield. I learned that lesson the hard way about 25 years ago! Retired firefighters always seem like good guys that have a good handle on how things should be. Your neighbor sounds like he fits the description. Thanks for watching Randy!
Nice job looks great
Thanks a lot!
Everyday 👍
Nice work.
Good job sir.
Thank you so much for your videos.
I am starting up a side business offering driveway repair and maintenance.
All I can afford right now, and only because I found them used, is a lawn tractor, a gravel grader attachment for lawn tractors, and a trailer to haul them. So I'm choosing my jobs wisely, where I can dig up existing gravel (reclaim) along with braking up the pot holes and then grade.
Any suggestions would be greatly appreciated. Thank you once again.
So satisfying.
That was really really good
Great job keep up the great work love your videos thank you
Just subscribed to your channel. Saw you on TTWT. I'm a few videos in so far and enjoy your content. I love the 318 GT's, I have one fully restored as a toy. I have JD and Kubota equipment. I like both.
That's great Jimmy. Thanks for stopping in and going through some videos. Glad to hear from a fellow 318 fan too!
Great job !!
Nice work!
Thanks Greg!
Looks really good.
Great vid and info... Thanks!
I estimate mostly residential driveways (500 sf > 25k sf), all day / every day, for a small asphalt paving co. I still can't decide what the best / worst 'driveway' is... ashalt, concrete, pavers or gravel. I know what the cheapest is... that's for sure.
Curious to know how the edging blocks were set / installed?
Interesting to hear you say that. I always wished I had an asphalt driveway. I'm not sure how he set the pavers as that was done before I showed up.