Cool chassis. Good for a budget friendly build when you aren't wanting to go a more complicated C3 build. Glad to see he's taken in the feedback and ran with it. The boys below throwing out terms like 'hate' and 'rip-off' are out of line.
Thank you! Yes I agree. I never said I hate it, I gave some opinions, and what could be approved on. Version 2 is already in the mail for me to check out!
Don't hate the chassis if your shocks are to short. Problem is shocks not chassis. Nice C1 contender imo. Shorty deadbolt links up front gladiator long links in rear. Push everything forward for the win in C1🍻👍
Never said I hate the chassis. If it was designed for you to swap out your stock frame rails with these, it will not work. Yes I talked about longer shocks would help.
Stock or aftermarket, shocks won’t make up for the super long « belly ».That chassis is reminiscent of the Mofo UAF, which kinda has the same « issue » even though its front bottom corner is more rounded. Look at Athos C1 from NW chassis works and you’ll see what is a strong c1 contender. That being said, any of the above is hate about this chassis and it doesn’t mean it’s not good either. It’s still a nice option as a chassis to have.
@@Moneypit__RC You never even came close to expressing anything that would remotely be considered hate. That's unfair and outta line. If constructive criticism is now 'hate', then it's one more step towards our demise.
Would it be possible to flip the esc tray upside down. Basically have your esc laying on top of your motor/trans? I wanna see that blazer body on something!!! 👍
@@NFGRC yes it would fit a deadbolt a lot better. But when he showed me pictures of the chassis, he had a bronco body on it. But don’t worry me and him talked it out and he’s revising this chassis to a new aversion.
@@Moneypit__RC It would be cool to make a vid of mods and tips that help in the snow vs the normal crawling we do and show some crawling in the ice and snow with them you could even make custom obstacles by packing the snow/ice
Have the same chassis, works good for what it is, it’s almost identical to the mofo ugly af chassis other than this has more mounting points for shocks Edit I take that back after watching further, this has a flat skid and the one I have is angled so it’s actually different lol
Your shock placement is wild sir.
@@TheShopMiniRC didn’t have much of a choice. Couldn’t really put them straight up and down.
Lol 😂
Cool chassis. Good for a budget friendly build when you aren't wanting to go a more complicated C3 build. Glad to see he's taken in the feedback and ran with it. The boys below throwing out terms like 'hate' and 'rip-off' are out of line.
Thank you! Yes I agree. I never said I hate it, I gave some opinions, and what could be approved on. Version 2 is already in the mail for me to check out!
@@Moneypit__RC Awesome. Look forward to seeing it. Hopefully V3 is right behind it.
Love the new set up! It’s definitely always feels good to change things up
I agree! It's so much fun to try new things.
@@Moneypit__RC my wife is all the time changing the house around lol I’ll come home from work and it’s completely different lol but it’s nice
@@maxwellwills1816 yup. I know that feeling 🤣
Looks like a good candidate for a set of the $4 injora aluminum trays (sliders) and you can get that esc lower. Good vid as always!
Yeah that would work great. I’ll have to try that out.
@Moneypit__RC Right on. Definitely one of my favorite rc channels, and one of the two I learn the most from! Keep at it!
@@ScottB4077VT I appreciate that! Than you very much.
Don't hate the chassis if your shocks are to short. Problem is shocks not chassis. Nice C1 contender imo. Shorty deadbolt links up front gladiator long links in rear. Push everything forward for the win in C1🍻👍
Never said I hate the chassis. If it was designed for you to swap out your stock frame rails with these, it will not work. Yes I talked about longer shocks would help.
Stock or aftermarket, shocks won’t make up for the super long « belly ».That chassis is reminiscent of the Mofo UAF, which kinda has the same « issue » even though its front bottom corner is more rounded. Look at Athos C1 from NW chassis works and you’ll see what is a strong c1 contender.
That being said, any of the above is hate about this chassis and it doesn’t mean it’s not good either. It’s still a nice option as a chassis to have.
@@Moneypit__RC You never even came close to expressing anything that would remotely be considered hate.
That's unfair and outta line. If constructive criticism is now 'hate', then it's one more step towards our demise.
I’d like to see how it does with the shock issue addressed 🤷🏽♂️
Me too! New chassis is in the mail! The revised one.
I heard your cat chirping in the video and thought it was one of mine lol
Hahaha. She loves hanging out in my room with me.
Same here
@@Flipp9k i started chirping back trying to get the kitty to come see me lol
Would it be possible to flip the esc tray upside down. Basically have your esc laying on top of your motor/trans? I wanna see that blazer body on something!!! 👍
If you check out my IG. I have it built again.
@Moneypit__RC I don't have any socials, just youtube bruh. Just a south central pa guy who builds r c junk in his basement 😂
Now I’m curious how it would run with some 50mm shocks.
Longer shocks would probably help. I was using the very small stock shocks.
Come on money pit. Don’t be saying the chassis has a flaw when it is clearly designed for short front links like a deadbolt has!!
@@NFGRC yes it would fit a deadbolt a lot better. But when he showed me pictures of the chassis, he had a bronco body on it. But don’t worry me and him talked it out and he’s revising this chassis to a new aversion.
any snow vids coming up with all this cold weather ?
I’m trying to think of something. Do you have any ideas or what you would like to see with the snow?
@@Moneypit__RC It would be cool to make a vid of mods and tips that help in the snow vs the normal crawling we do and show some crawling in the ice and snow with them you could even make custom obstacles by packing the snow/ice
Or a snow crawl with @24yep would be awesome.
Have the same chassis, works good for what it is, it’s almost identical to the mofo ugly af chassis other than this has more mounting points for shocks
Edit I take that back after watching further, this has a flat skid and the one I have is angled so it’s actually different lol
Haha I see !
Also the chassis looks a lot like the MOFO Ugly AF chassis
Oh really? I don’t have that chassis.
@ yeah it’s very similar
Looks like someone is ripping off the mofo chassis. This chassis is a thingiverse file
Agree....very much like the v3 uaf.
@@troypostie1252 only real difference is the shock mount risers and maaaaybe a little shorter