IF YOU ARE HAVING THE NOTORIOUS VW VOLKSWAGEN TURN SIGNAL ISSUE WHEN YOU TURN IT OFF AND IT KEEPS CLICKING IN THE DASH BOARD RIGHT BY THE STUPID HAZARD LIGHTS SWITH , GET SOME ELECTRICAL CLEANER SPRAY OR I USED MASS AIRFLOW SENSOR CLEANER AND FLIP YOUR TURN SIGNAL SWITCH DOWN FOR LEFT SIGNAL AND SPRAY THE BASE OF THE TURN SIGNAL SWITCH WHERE IT GOES INTO THE STEERING COLUMN AND THE FLIP THE SWITCH UP AND SPRAY LIKE HELL INTO THE SAME AREA AT THE BASE OF THE SWITCH. THIS IS WHAT I DID AND IT FIXED THE PROBLEM !!!! I WAS QUOTED $365.00 TO REPLACE THE TURN SIGNAL SWITCH AND GUESS WHAT I FIXED IT WITH 3 PENNIES OF ELECTRICAL CLEANER SPRAY !!!! GOOD LUCK !!!! TRY IT !!! I BET IT WILL FIX THE PROBLEM !!!!
+jonesy7744 that's the clock spring, it allows the wheel to rotate without putting stress on the electrical connections to the wheel, such as air bag, horn and MFSW.
Hey its not necessary to remove the steering wheel, to remove the lower molding. Just turn the steering wheel to the left and right to get access to the 2 Phillip head screws, behind the wheel.
Not so on my '03 Bora. The plastic shaft the left hand screw behind the wheel goes into cannot be pulled out without first removing the wheel(or maybe breaking the shaft/sawing part of the plastic cover off. But if you want to keep it all intact, the wheel has to come off. I know cos I tried it a million ways!
hey, i have a VW Bora (in brazil, but it's called city jetta in canada), mine does not have the Cruise control... what do i need to install it? i suppose that simply changing the turn signal arm to one with the cruise control buttons wouldn't work, right? should i buy a module or anything else?
Hi Gabriel, 3 months later. So I hope this helps. As far as I known your car should at least have an electronic throttle pedal. Also as far as I can tell, on a TDi it should be almost plug and play. On most petrol cars its a bit more complicated. Hope this helps!
i replaced mine and the turn signal does not work. I did everything you did. is it possible that the new turn signal I installed is broken? if so how much is it to replace?
+Alan t it can be done need to install the switch and the appropriate wiring to the PCM, and turn on the cruise in the PCM with your handy VAG-COM...........or visit the dealer to have it turned on.
Good video and nice photos of showing the tools required
Thank You
no problem, glad i could help.
Thank you for that correction, all done now.
Getting ready to replace both of these...in my '03 GLS and my '01 GLS 1J's
all your videos are good. even in 2021.😉
IF YOU ARE HAVING THE NOTORIOUS VW VOLKSWAGEN TURN SIGNAL ISSUE WHEN YOU TURN IT OFF AND IT KEEPS CLICKING IN THE DASH BOARD RIGHT BY THE STUPID HAZARD LIGHTS SWITH , GET SOME ELECTRICAL CLEANER SPRAY OR I USED MASS AIRFLOW SENSOR CLEANER AND FLIP YOUR TURN SIGNAL SWITCH DOWN FOR LEFT SIGNAL AND SPRAY THE BASE OF THE TURN SIGNAL SWITCH WHERE IT GOES INTO THE STEERING COLUMN AND THE FLIP THE SWITCH UP AND SPRAY LIKE HELL INTO THE SAME AREA AT THE BASE OF THE SWITCH. THIS IS WHAT I DID AND IT FIXED THE PROBLEM !!!! I WAS QUOTED $365.00 TO REPLACE THE TURN SIGNAL SWITCH AND GUESS WHAT I FIXED IT WITH 3 PENNIES OF ELECTRICAL CLEANER SPRAY !!!! GOOD LUCK !!!! TRY IT !!! I BET IT WILL FIX THE PROBLEM !!!!
+jonesy7744 that's the clock spring, it allows the wheel to rotate without putting stress on the electrical connections to the wheel, such as air bag, horn and MFSW.
Hey its not necessary to remove the steering wheel, to remove the lower molding. Just turn the steering wheel to the left and right to get access to the 2 Phillip head screws, behind the wheel.
Not so on my '03 Bora. The plastic shaft the left hand screw behind the wheel goes into cannot be pulled out without first removing the wheel(or maybe breaking the shaft/sawing part of the plastic cover off. But if you want to keep it all intact, the wheel has to come off. I know cos I tried it a million ways!
To the right of the video is the light turn stitch knob thing, are you gonna do a video on removing them? And the air vents...
BMAC VAGS What's the piece you remove at around 1:10? Is it just the sensor for steering wheel position? Cheers for the video! Massive help.
Cant you make a guide where you install cruise pilot on mk4 golf/bora?
Is this the same as on the 2000 Polo (mk3 facelift)? My indicators only work if you hold the stalk down/up. Reckon a salvage replacement would fix it?
Do you need to take off steering wheel on golf mk3 if u want to change windscreen wiper arm ?
I dont know what you mean by cruise pilot
Right you are, cheers.
hey, i have a VW Bora (in brazil, but it's called city jetta in canada), mine does not have the Cruise control... what do i need to install it? i suppose that simply changing the turn signal arm to one with the cruise control buttons wouldn't work, right? should i buy a module or anything else?
Hi Gabriel, 3 months later. So I hope this helps. As far as I known your car should at least have an electronic throttle pedal. Also as far as I can tell, on a TDi it should be almost plug and play. On most petrol cars its a bit more complicated. Hope this helps!
Mine isn't TDi but it does have an electronic throttle pedal.
Is this same on the Passat B5
i replaced mine and the turn signal does not work. I did everything you did. is it possible that the new turn signal I installed is broken? if so how much is it to replace?
what year vw is this? I need to remove a 2010 5 cylinder turn signal arm. any help?
Which number is the central bolt on steering wheel (triple square 12 pin bit)?
T55
the triple square is a 12mm
How can I remove a steering wheel that comes with no airbag??
how do you put cruise control on a mrk4 golf that as not got this on the car any tips on how to do this ,is it a job that can be done .
+Alan t it can be done need to install the switch and the appropriate wiring to the PCM, and turn on the cruise in the PCM with your handy VAG-COM...........or visit the dealer to have it turned on.
I have done them videos already, look through my videos and you will find them
your description is removing wiper arm, the video is for the turn signal
It’s for both duh!
dude do I need to take out the speedometer to take the wheel off?
No you don’t
hi can you telle me what i did wrong i change my turn signal arm and now my air bag light is on can you help me thank's and yes i subcribe
Did you removal the steering wheel?
BMAC VAGS yeap off course the same way you did loll
When you remove steering wheel the airbag light cones on. Do you have vw cables? If not I have some
before i do this the light was off what you meen vw cables ?
when i remove steering Wheel i don't deconnect the battery
How do you get the airbag off? ..
Google search "Bmacvags steering" and you will see it
help
*cruise control
youtube is no help for shit
Why what is wrong?
What’s a good screwdriver size to help remove the steering wheel airbag?