ฝัง
- เผยแพร่เมื่อ 10 เม.ย. 2022
- 6 Foot Bullwhip Blueprint FREE:
bit.ly/36H2u2L
In this 6 video series I show you how to make a professional quality paracord bullwhip from start to finish! Buckle up, it's over 4 hours of content and I share as much whipmaking knowledge as I can in that time.
Here, I show you how to make the core of your bullwhip. I'll go over how to load your core and build the beginnings of your Bullwhip's transition.
WhipWorks Bullwhip Blueprints:
etsy.me/3LXcOT1
Coreless Paracord and other Whip Making Materials: etsy.me/3JtWaZy
Jigpro 3-1/2" Lacing Needle:
amzn.to/38eZdrS
WhipWorks Bullwhips: etsy.me/3938DkJ
WhipWorks Stockwhips: etsy.me/390ty8i
Instagram @whipworks
Check out my Design a Bullwhip page: www.whipworks.com
Facebook / adamswhipworks
Music by Epidemic Sound (www.epidemicsound.com) - แนวปฏิบัติและการใช้ชีวิต
![USAB Showcase: CANADA vs USA [OFFICIAL STREAM]](http://i.ytimg.com/vi/m9Cz3xsdDgc/mqdefault.jpg)
Using my headphones and it’s only coming from one side on this video lol but other than that great video
Thank you for that video!
I'm making Whips by myself since the start of that whole pandemic. And it is so relaxing for me.
And that video help me a lot :)
Keep going and stay healthy!
Greetings from Germany
What a great pandemic hobby! I'm glad this video was helpful
Always interesting to see how other makers do things!
Agreed! Thanks for watching
I felt so offended at the fact this video ONLY has 87 likes. I'm not accepting it... In my mind this has a million likes
Haha, thank you! I appreciate the sentiment :-)
@@whipworks4468 I binged and watched all the parts and I absolutely loved it! I'm gonna save up and make one of my own with your tutorial. It looks like it's so so so much fun!!!
@@ajosuql7468 I love this! I'm so glad that you enjoyed these videos :-D
Amazing. Thanks for putting this series together.
Of course! I hope it's useful for you
Just found your site(bull whip 1;Core)-you are a good teacher. You reminded of a discovery I found many years ago.In trying to slip heat shrink over a rough surface I rub a bit of dry bar soap or slightly dampened over the rough stuff(paracord!), even saliva. That is absorbed and eventually works its way out of the system-never had any slippage or chemical reaction. Thank you again for entertaining instructional videos. Dr. Bill
Hello :) I bought the full blueprint a few weeks ago, its awesome and I recommend everybody get a copy, Im working on the 4' to start and loving the video/blueprint combo. Would be super sweet if it were possible to include download links for the video lessons for old fogies like me who are getting tired of going through YT. Great work! Love all the videos!
Hello! Thanks for getting the blueprints, I'm so glad that you're enjoying these tutorials. I hope your 4 footer turns out how you want it to!
This looks VERY interesting, and is looks like it would make for an interesting challenge to build.
One thought (ideas for future videos?): some follow up videos that deep dive into the processes:
The big one would be yet another look at each level of plaiting as the primary focus:
1. You use two Different colors for the left and right sides [when you did this on a 16 plait, it made it MUCH easier to see what was going on]
2. You have short pause between each weave step so folks can "Follow along"
Another idea would be to replicate/deep dive into the various sinew wraps + kevlar string lock downs
1. Again do this with contrasting colors to make it easier to see what is going on
These are great thoughts, especially the 2 toned 6 plait and 10 plait layers, this was a definite oversight on my part. Maybe if I do a future video project I'll include this!
have you tried adding the 2nd layer of shrink tubing from the end of the handle and pulling it over? just wondering if its any easier?
Here's an idea: Instead of 1/4 inch shrink-wrap over the sinker cord (the longer second piece of shrink wrap), try 5/16 inch shrink wrap. It would be easier to slip into place. The 5/16 will shrink down smaller than 1/4 inch after it is heated.
Since I made this video I've actually started doing this! So much easier!
What made you settle on 8 inches of shot in the core? Have you made whips with less or more and how did that effect the whip???
Great question! First, the 8 inches is just for my 6 footers, I load more in longer whips and less in shorter whips. I used to load my cores further up in my bullwhips, but over the years I have trimmed it back to shorter lengths because I like the feel of it more. If you want a heavier or lighter whip by all means adjust to your liking! It's really a taste thing
@whipworks4468 You mentioned 3/8” shrink tubing for longer whips at the beginning of the video. Do you shrink that over 2” x 1/4” piece at the transition after wrapping with sinew? If not, would you be willing to share that information?
Hey, great question! I put the 3/8 inch piece over the 1/4" piece, and THEN I wrap it in artificial sinew, so two layers of shrink tubing and then rug liner and then artificial sinew. I hope this helps!
Thanks for sharing! Are you willing to share your blueprint as an attachment to be viewed more easily? Comes out be fuzzy on my screen shot
There's a link in the bio to a google drive folder where you can download it!
why is it only in my left ear?
Hey man just stumbled across this video. If I was to go the leather route how would it change the design? I would like to go with kangaroo and use stainless cable as my core. Any advice? Love the video thanks.
Hello, great question! A lot of what I show here would be similar, but kangaroo hide whips are very different. There's a book by Ron Edwards, "How to make whips" that may be helpful. There are also tutorial videos out there specifically about making leather whips. Sorry this answer isn't more helpful, good luck to you!
@@whipworks4468 thanks for the direction! I appreciate the help.
The tie off method for core material in the video states use an extra 4"; but the provided blueprint link no longer references this it seems -- should we just drop that?
If you're using the tie off methode be sure to use some extra core material, as it's difficult to predict how much material you'll waste in the core loading process. Does this answer your question?
@@whipworks4468 Yea that helps me past that :) Thank you!
@@kontu5399 You got it!
I am curious what kind of material you would use to load the paracord other than #9 shot. I don't have access to an ammunition like that where I am. Would fishing sinkers do the trick or would they make an odd bulbous shape?
There's all sorts of material you can use! Some people use the beaded strings that hang down from ceiling fans. BB's can work. Anything weighted that would fit in the sheath
I would think having the sinker cord go the full length of the steel handle would be better for holding the sinker cord onto the handle.
I can't find 1/4" sinker cord. Were do you get it?
If you can't find it, I buy it in bulk and sell it on my Etsy shop: etsy.me/2JHAcI3
What waws the purporse of the rug liner?
What is the string called that you sheath over the steel rod again? And will wax string work?
Artificial sinew! Wax string should work well too!
I got that. I’m talking about what you load the number nine shot into. Not trying to sound smartass.
@@aaronlewis672 Oh! That's called Sinker Cord, I use 1/4 inch. I also sell 50 foot lengths of it on my Etsy shop if you can't find it elsewhere, @whipworks on Etsy
I know you have a blueprint which is great and needed. However, I find myself wondering what is going on inside the core. A diagram illustrating where all the processes start and stop would help me. For example; Is the shot touching the end of the rod inside the sheeth? I'm having to assume a few things that I'd rather be sure of. Otherwise, your external processes are explained well.
Yes! The shot is touching the rod inside of the sheeth at the tip, but not on the sides of the rod. Deos that make sense? It's a good clarification!
Is there a full materials list somewhere?
I was hoping for this when i bought the blueprints!!!
Is there anywhere I can see a full list of exactly how much.m supplies I’ll need and what I’ll need so I can make a check list? Maybe I’m just missing it somewhere
Sorry, I never made a checklist of materials. I do walk through the materials you'll need in the first episode of this series!
That’s ok! I really wanna try to make this so do you have a good guess as to how many feet of paracord id need? I’m also gonna order the shot off of your Etsy store so do you think just 1 5oz bag will be enough?
Great videos btw!
Thanks
@@FunkyTownFinatic 300 feet is a good buffer for a 6 footer, I know that an 8 footer uses about 300 feet exactly if that's a helpful reference! And one 5 oz bag of shot will work for you for one whip
Sweet man your the goat thanks!
At the 7:29 minute mark you mention "this other piece of string I have here." What is the other piece of string?
It's kevlar string, but any sturdy relatively thin piece of string will work!
if you are using the refrigerator tube and the funnel how do you do the tie off of the loaded section
You tie off the thong end, and you don't tie it off on the end that will go on the handle, you immediately attach it to the handle, does that make sense?
@@whipworks4468 so attach the rod ==load the shot then tie off after the shot is loaded at 8 1/2 inch as tight as you can?
@@robertmainey7274 I think what you're describing will work!
Watcher from the UK, what type of cord is the core? Trying to source locally and I'm not getting many results?
It's 1/4" sinker cord made by Tufline, it's tough to find even here in the US. I do sell it on my etsy shop if you're willing to pay the shipping
Why not steel cable for the loaded line ?
Some whips are, I find it too rigid. The Whip in Indiana Jones that was used for the car dragging scene in Raiders had a steel cable running through it!
You should be band from using files less it’s a diamond or abrasive coated file it’s directional only cuts in one direction and if you drag the file backwards it kills the file other than that great vid
Здравствуйте.что за шарики?ружейная дробь?
That's what he used, but I'm sure normal bbs like a few other people use would have a similar effect
1:15 When you refer to athletic tape, are you talking about “KT” tape? Or the stuff that they’ll use to tape hands and feet for support?
I'm not referring to KT tape, I'm referring to hockey tape, does that help?
If you are worried about lead getting on you as you make the whip, then why aren't you worried about it coming out as the whip ages? The nickel plated lead shot will rub on itself until it grinds away the plating, then you are just making lead dust... eventually, it will leach out of the binding, something to think about if you're squeamish, go all in on it.
I had the idea of stainless ball bearings or even stainless beads that could be strung together with monofilament and pulled through the sheathing with less effort.
I was going to comment and say using lead would be better because it's one of the two most dense metals known to mankind, I love lead the only other metal nearly as dense is gold...so it would go without saying that lead is much heavier than steel and wouldn't require as much to achieve the same amount of steel used
For sure, lead's density properties are amazing. For me, I'm trying to reduce my exposure as much as possible, so steel feels safer for me, even if it is less dense
No audio on this or part 2
bought 1/4 inch sinker cord and it wint even go over 1/2the diameter of the steel rod
should i try the 3/8 inch sinker
tried loosing it up over a wooden screwer that is thinner than the steel rod and it wouldn't fit
What brand was the sinker cord? And what diameter steel rod are you using?
@whipworks4468 Para cord galaxy website 1/4 inch sinker cord and lowes 1/4 inch steel rod and it measured at 1/4 inch
@@robertmainey7274 Hmm, I've never seen this product, I wonder if the 3/8 inch of their sinker cord would work? I've always used the Tufline brand of sinker cord. I sell it on my Etsy shop if you'd like some that you know would work!
AAa Ther it is 🤣
You found it!
Whoop...
hmmm my one ear interesting
What type of paracord is used in the core. This most definitely is not 550 paracord.
Correct, it's 1/4 inch sinker cord, I sell this material in 50 foot lengths on my etsy shop if you're interested, it can be hard to find: etsy.me/3Fc30Uh
@@whipworks4468 I have just checked out your shop and I would love to purchase it but the shipping is just too high because I live in Europe. Is any paracord 6mm in diameter good enough?
@@jackkageweeb7315 I have used paracord like that before and it can't work. You may need to figure out a different technique of loading it and attaching it to the handle than what I show in these videos
@@whipworks4468 One more question for your 6 plait, 10 plait and 16 plait layer I can use 550 type III paracord because I have some laying around.
@@jackkageweeb7315 Yup! 550 will work great! Just be sure to gut it (I'm sure you knew this, I'm just making sure!)
wheres the right ear audio ;(
🌈 𝚙𝚛𝚘𝚖𝚘𝚜𝚖
That’s a lot of massaging and sheathing😂😂