If you want to check out how accurate the Brezza you can check out our testing : th-cam.com/video/9WPbeN-LAFM/w-d-xo.html Hey there, ❤❤❤❤ If you find our video helpful, we would 𝓰𝓻𝓮𝓪𝓽𝓵𝔂 𝓪𝓹𝓹𝓻𝓮𝓬𝓲𝓪𝓽𝓮 it if you could support us by subscribing. Your subscription will help us reach 𝓞𝓾𝓻 𝓰𝓸𝓪𝓵 𝓸𝓯 5𝟬𝟬𝟬 𝓼𝓾𝓫𝓼𝓬𝓻𝓲𝓫𝓮𝓻𝓼, and we sincerely thank you for your support. ❤❤❤❤
I have tested and calibrated this machine several times, measuring the amount of powder and water it dispenses, in various ways, and it has always given me satisfactory results. The important thing is to follow the manufacturer's instructions, and clean the dispenser, the The machine has never measured the amount of formula wrong, my wife is delighted
when you click to fill it to 4 ounces at notice it filled it up a little bit more than that. Is that normal or is the baby getting more water and less nutrition?
When you press 4 oz it will dispense 4 oz of water. The extra is the formula that comes out first so in the bottle it show little more than 4 oz in total. Hope that helps. Thanks for your comment. 😊
@@EclecticIdeas lol I was about to return my machine. I thought it was un accurate. But it makes sense because it pours the water first and the level goes up after you had the powder.
hello i have a questiion, on the enfamil on the back it say " 2 fl oz bottle is 2 fl oz of water and 1 level scoop of powder, 4fl bottle is 4 fl oz of water with 2 scoop. what if i want to make 3 oz and how much water do i set it to and how many scoop of powder do i set? im sure the babybrezza machine does not have half for the # setting. thank you
I could not find any documentation in their website that details the inner workings. There are two ways if you want to test it. One is use the kitchen scale and test one using manually and one with baby brezza. And another way is put a seran wrap in the dispenser without blocking the water. You can see the dispenser collect certain amount. It is supposed to adjust the amount. But if you have doubt for infants just measure it for peace of mind then you may want to opt for manually or use this.
I have a question, right now we are doing 90Ml(3oz) and the website says to set up to 4 (we are using Enfamil a+ neuro pro gentlease). But if we want to increase to 120(4oz) we keep 4 as the setting no matter how many ML? ?? I'm confused
Ya the setting is the same to 4. We tested it and it seems to change the amount as the oz increases. We will be putting the video soon of our test. We were worried too but seems it adjust itself.
If I understood correctly, you have set for 6 for powder and 6 oz of liquid? The powder setting guide is on their website but you can always test it to see according to the brand. Thanks for your comment.
@@EclecticIdeas y porque se me llena por el 7 oz cuando yo la preparava a mano era normal en 6 oz y ahora la maquina me lo hace hasta 7 oz tengo miedo q me quede más aguada .
@@yaimigarciaconlabendiciond3415 using google translate: No hemos tenido ningún problema y llevamos 7 meses alimentando. Las onzas extra se deben al polvo. Si lo configura en 6 para agua, entonces uno adicional será para el polvo. Espero que ayude.
O no ya lo entendí 1 adicional biene siendo el polvo pero cuando uno lo prepara a mano no puede ser igual porque uno le hecha 3 tapita de polvo y de agua hasta el 6 y al contrario la máquina lo llena hasta el 7 porq si hecha esapta las 6 de agua.
If you want to check out how accurate the Brezza you can check out our testing : th-cam.com/video/9WPbeN-LAFM/w-d-xo.html
Hey there,
❤❤❤❤
If you find our video helpful, we would 𝓰𝓻𝓮𝓪𝓽𝓵𝔂 𝓪𝓹𝓹𝓻𝓮𝓬𝓲𝓪𝓽𝓮 it if you could support us by subscribing. Your subscription will help us reach 𝓞𝓾𝓻 𝓰𝓸𝓪𝓵 𝓸𝓯 5𝟬𝟬𝟬 𝓼𝓾𝓫𝓼𝓬𝓻𝓲𝓫𝓮𝓻𝓼, and we sincerely thank you for your support.
❤❤❤❤
I have tested and calibrated this machine several times, measuring the amount of powder and water it dispenses, in various ways, and it has always given me satisfactory results. The important thing is to follow the manufacturer's instructions, and clean the dispenser, the The machine has never measured the amount of formula wrong, my wife is delighted
Thanks for watching our video and also providing the input. This has made our feeding the little one easier for sure.
when you click to fill it to 4 ounces at notice it filled it up a little bit more than that. Is that normal or is the baby getting more water and less nutrition?
When you press 4 oz it will dispense 4 oz of water. The extra is the formula that comes out first so in the bottle it show little more than 4 oz in total. Hope that helps. Thanks for your comment. 😊
@@EclecticIdeas lol I was about to return my machine. I thought it was un accurate. But it makes sense because it pours the water first and the level goes up after you had the powder.
@@IWario1 this has been really helpful for us especially at night. A lifesaver and you are ready to feed instantly without burning the baby.
como usar ela ???
@@IWario1 here is the test we did if you want to check it out th-cam.com/video/9WPbeN-LAFM/w-d-xo.html
Do you need to turn off machine and turn it on every time before using it ?
@@malehamuhammad1467 you don’t need to turn it off. Just keep it on. 😊
hello i have a questiion, on the enfamil on the back it say " 2 fl oz bottle is 2 fl oz of water and 1 level scoop of powder, 4fl bottle is 4 fl oz of water with 2 scoop. what if i want to make 3 oz and how much water do i set it to and how many scoop of powder do i set? im sure the babybrezza machine does not have half for the # setting. thank you
I could not find any documentation in their website that details the inner workings. There are two ways if you want to test it. One is use the kitchen scale and test one using manually and one with baby brezza. And another way is put a seran wrap in the dispenser without blocking the water. You can see the dispenser collect certain amount. It is supposed to adjust the amount. But if you have doubt for infants just measure it for peace of mind then you may want to opt for manually or use this.
I have a question, right now we are doing 90Ml(3oz) and the website says to set up to 4 (we are using Enfamil a+ neuro pro gentlease).
But if we want to increase to 120(4oz) we keep 4 as the setting no matter how many ML? ?? I'm confused
Ya the setting is the same to 4. We tested it and it seems to change the amount as the oz increases. We will be putting the video soon of our test. We were worried too but seems it adjust itself.
@@EclecticIdeas thank you for replying,
@@brandonguzman6250 sure let us know if you have questions. Been using it for sometime now and it’s been doing ok so far.
@@brandonguzman6250 Here is the test we did if you want to check it out: th-cam.com/video/9WPbeN-LAFM/w-d-xo.html
Tengo una duda para 6 onzas se programa 6 de polvo.
If I understood correctly, you have set for 6 for powder and 6 oz of liquid? The powder setting guide is on their website but you can always test it to see according to the brand. Thanks for your comment.
@@EclecticIdeas y porque se me llena por el 7 oz cuando yo la preparava a mano era normal en 6 oz y ahora la maquina me lo hace hasta 7 oz tengo miedo q me quede más aguada .
@@yaimigarciaconlabendiciond3415 using google translate:
No hemos tenido ningún problema y llevamos 7 meses alimentando. Las onzas extra se deben al polvo. Si lo configura en 6 para agua, entonces uno adicional será para el polvo. Espero que ayude.
Entonces yo le doy 6oz de leche es 6 de agua y 7 de polvo toma enfamil gentlease
O no ya lo entendí 1 adicional biene siendo el polvo pero cuando uno lo prepara a mano no puede ser igual porque uno le hecha 3 tapita de polvo y de agua hasta el 6 y al contrario la máquina lo llena hasta el 7 porq si hecha esapta las 6 de agua.