ฝัง
- เผยแพร่เมื่อ 16 พ.ย. 2024
- Tyler is back!! He's here to address how to ensure you don't get poor color on your stainless welds. This is part 1. For the full video and resources, join us in the WELD app or desktop version.
Ready to join the WELD community? Download the app in the Google or Apple stores or Log in online at www.weld.com today! Find welding resources and exclusive or refurbished videos with details to help you get the most out of your learning. Check out awesome member discounts through our brand partners and enter to win monthly mystery boxes, listen in on our podcasts and follow our social channels. linktr.ee/Weld...
Disclaimer: As an Affiliate and Industry Influencer, Weld.com earns from qualifying purchases via our posted links and affiliate links. Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK. EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.
![เจ็บที่ยังฮัก - ม่อน วรวิทย์ [ Official Mv ] จอนนี่มิวสิค](http://i.ytimg.com/vi/KALIGSRSjFs/mqdefault.jpg)
Tyler, this is great information, cheers form an old guy in Florida.......Paul
From a metallurgy standpoint, I think you've contributed a better explanation of how controlling welding variables can affect weld quality. I honestly can't imagine taking time to learn how to reproduce these effects. These colors indicate contaminants which, at worst, would require a reweld. His bright, shiny weld in the last pic (bottom right) is what it's supposed to look like. Stainless is a breeze to weld.
Love from Denmark.
Thanks for the love man. Just a lot of time experimenting and getting results of hours under the hood.
I'd like to see you do some vid on 14 or 16 gauge corner to corner. Tig fuse inside and outside that's what we do alot of. No burnthrough
Awesome info and demonstration! Thank you Tyler and Weld!
Looking forward to seeing everyone at Fabtech!
Excellent video & information! Learning to weld aluminum and steel has seemed easier than mastering the look on stainless. I recently purchased an assortment of larger cups for the very reasons shown.
Looking forward to another video with thinner test coupons-
Thanks!
Keep posted we're working on it
I appreciate it! Ally is probably my favorite to weld. I work woth a lot of thin gauge material. It's fun but challenging.
Good job big guy
I looks like you pretty much run 25 cfh flow of argon on your 25” ss. Would you also run 25cfh on 16g ss ?
Yes. I base it off of the cup size. Post flow may change based on material thickness or length of the joint.
@@TJCaton91 so for a smaller cup (like an 8) you would reduce the flow to reduce turbulence coverage?
@@paulmcdonald3570 yeah a little bit you could get away with 25 cfh on a #8 I'll drop down to maybe 20 cfh just to save a bit of argon. I know it's not much but it does add up overtime. Or if I need a longer tungsten stick out I'll up the flow to push a little more gas. But typically I'm within that range. Too high will cause turbulence like you said obviously too low will result in contamination.
Thanks for info Tyler but 1/4 inch stainless is a lot easier to weld than 1/16 or 1/8th which is the majority of what I have to weld. The real question I would ask is how do you protect the already welded side from burning when you need to weld the back side ?????
Create a purge chamber. I weld a ton of 1/16th SS. We're working on some content in that as well.
Also use aluminum backing blacks clamped to the backside. That makes a massive difference.
Can cologne mask a welder's smell?
What exactly is a cubic foot pound? Never heard of that one before. Just don't make sense to my simple brain.
A typo to the best of my knowledge. CFH is a flow rate of gas. Which stands for cubic feet/hour of flow
@@brapbrapmafucka That's what I thought. Just messin a bit ✌
I believe it refers to gas pressure
I'd like to see stick stainless
You can always check out the weld app. We are providing much more content there :)
We would stick weld 8" stainless exhaust on gas compressors and it was beautiful to work with.
It's a great process. I have done quite a bit on old stainless steel feed hoods on dairy farms where cattle have bashed the hood to get a few more treats.
With stick, l always got good colours but with Tig it's seems harder. Must just be my technique.
309-16 sodel rods are a dream flat and horizontal and overhead. Ive used 309L-15 esab rods before for vertical and stuff and it wasnt as fun or fresh but thats just an amateur millwright opinion lol
That’s crazy, I didn’t know my regulators measured cubic foot pounds per hour.
Was a typo. It obviously isn't said in the actual video.
@@TJCaton91 Yes, that was quite clear to me.
@@christianbocka2724 seemed like I need to clarify it for you.
YOU SHOULD SEND ME ALL THAT LEFTOVER WASTED STAINLESS PLATE..
CFH stands for Cubic Feet per Hour. What is Cubic Foot pounds per Hour??? It’s pretty sad to see a mistake like this on a video from your channel that has 800k subscribers. Not to mention at the time of this comment there are 1.3k views and no likes. Also this video is full of useless information that wastes time…
Welp I'm not sure what to tell you about the CFH. But experimenting with equipment and settings can help someone a lot when learning or from making mistakes on their own. But thanks for the negative feelings. As far as likes it looks like they're turned off.
Mistakes happen what you can do to contribute to the industry is nicely correct it
Secondly the likes are off on all our videos for a reason as it’s not for the public..there’s no need for a likes contest.
We spend a lot of time, money and energy to give you some free for you content..please be respectful as negativity isn’t necessary. For more in depth education you can download the app.
Thanks for the feedback.
I disagree with this negative comment. I'm one amateur who experiments in my garage and thought this production was full of interest. The welding community goes to a lot of effort to provide instructional content at ALL levels and its all for free. So Michael wants perfection and he wants it for Free. I'd say that was ungrateful, unrealistic and downright disrespectful. Free speech is fine to a degree but this sort of attack will just get a lot of people irritated.
@@causewaykayak Thank you for the support and understanding. We appreciate it!!
@@causewaykayak I really appreciate your support and seeing value in the content. You're the audience we strive to help and build up in the community.