What up Deejay Neezy, yes you can use one remote to control two or more geysers. What you need to do is connect all the geysers using DMX cables and plug in the remote receiver into the geyser. Then make the first geyser set to master and then the rest of the geysers to slave mode. You should then be able to control two or more geysers with one remote! Happy Lighting!
When powered up does it automatically go into warm up? & Is the warm up loud? Love to know if the remote is good for 2 machines 7' apart or do you need the dmx cable hooked together?
Hey Maxwell! Yes the geyers go directly into warm up mood. This allows the unit to heat up both the fixture and also the fog fluid. It isn't too loud honestly. Depends on what you define as loud. Yes the remote can work on multiple geysers but you need to connect all the geysers together with a DMX cable and make the first geyser you will use with the remote on master mode. The rest should be set to Slave mood. Whatever you do, use DMX cables when you connect lights together!!! Happy lighting!
The dip switches are only on the remote receiver when you want to use the remote. That allows you to control what geysers are going off when you use the remote.
Question. Can I run the geyser longer than 8 seconds? And how do I use without a remote control?
hi bro i bought two geyser lights so can i use a single remote for same time?
What up Deejay Neezy, yes you can use one remote to control two or more geysers. What you need to do is connect all the geysers using DMX cables and plug in the remote receiver into the geyser. Then make the first geyser set to master and then the rest of the geysers to slave mode. You should then be able to control two or more geysers with one remote! Happy Lighting!
When powered up does it automatically go into warm up? & Is the warm up loud? Love to know if the remote is good for 2 machines 7' apart or do you need the dmx cable hooked together?
Hey Maxwell! Yes the geyers go directly into warm up mood. This allows the unit to heat up both the fixture and also the fog fluid. It isn't too loud honestly. Depends on what you define as loud. Yes the remote can work on multiple geysers but you need to connect all the geysers together with a DMX cable and make the first geyser you will use with the remote on master mode. The rest should be set to Slave mood. Whatever you do, use DMX cables when you connect lights together!!! Happy lighting!
@@Schmidtizzles how would u make one a slave and one a master...
Andy Gruuve connect both fixtures with dmx cable and then set one of them to slave and the master use the remote or the onboard display
@@brentschmidt193 I actually have the 1st generation of these guys and I'm having a hard time connecting both of them in series
What are the DIP switches for?
The dip switches are only on the remote receiver when you want to use the remote. That allows you to control what geysers are going off when you use the remote.