How to fix configuring the Archer Plus stabilised receivers: Installing the FrSKY SRX LUA scripts

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ธ.ค. 2024

ความคิดเห็น • 86

  • @ElseysEmpireRacing
    @ElseysEmpireRacing 4 หลายเดือนก่อน +2

    Hey Darren. It looks like V2.06 Lua is for ETHOS SR10+ and TD SR 8-12 receivers. I had both of these receivers exhibit a weird phenomena on a gas plane. Channels 7-10 had a serious jitter in them only when the engine was running. I thought it was ign interference, WRONG. It was the 2 independent Stabilizing Functions thing. It was cured by turning OFF the "Second Independent Stabilizing Functions" using the Lua Script V2.06. Its on page 2 of 2 !!!, which is hard to find to adjust. It is ON by default, not a good idea IMHO. This video showed me how to find page 2, at 13:55, thankfully.
    I hope this helps others who stumbled on this like me. Thanks

    • @MrD
      @MrD  4 หลายเดือนก่อน

      Thanks for the tip 👍🏻

  • @tommcallister5835
    @tommcallister5835 8 หลายเดือนก่อน +1

    Thank you for holding my hand and helping me learn my new Fr-SKY gear. My last radio was a fm futaba, so this is a pretty big jump! Incredible how far things have come in 20 years.

  • @steveshipley4383
    @steveshipley4383 ปีที่แล้ว +3

    Couldn’t have done it without your help! Thank you so much for sharing your knowledge!

    • @MrD
      @MrD  ปีที่แล้ว

      Glad I could help Steve 👍🏻

  • @stevenmohr4588
    @stevenmohr4588 ปีที่แล้ว +1

    Thank you always Darren for helping us with these awesome updates. I be lost without them. 👍👏👏👏

    • @MrD
      @MrD  ปีที่แล้ว

      Thanks Steven. Glad I could help 👍🏻

  • @Johnn_T
    @Johnn_T ปีที่แล้ว

    good video Darren as usual. Would be good to see a video covering a few of the things I saw in this video-The changes in Ethos suite, how to install new luascripts onto the radio so they show in the touchscreen menu's, perhaps even one showing how to do nifty things like change the name in the centre of the title bar like you did with your one awhile ago and used your own logo-I'm sure it's easy, but it would be cool to have videos showing things like this for people and you are definitely leading the way with Ethos Video's mate. 10/10

  • @theblackwalnutstudio
    @theblackwalnutstudio ปีที่แล้ว +1

    Thanks once more Darren. Awesome

    • @MrD
      @MrD  ปีที่แล้ว

      Thanks 👍🏻

  • @los_sitios_de_lola
    @los_sitios_de_lola ปีที่แล้ว +2

    I have tried what you explain in the video but with an Archer plus + receiver, not the pro, but it doesn't work for me. The SXR goes back to off all the time. For my receiver would it have to be done differently or does it only work for the pro? Thank you for the video!

  • @spartan3299
    @spartan3299 ปีที่แล้ว

    Pleased these are working.

  • @spartan3299
    @spartan3299 ปีที่แล้ว +1

    ELRS and Crossfire as well I understand. Nice. How about the INAV and YAPPU LUAs?

    • @MrD
      @MrD  ปีที่แล้ว

      Yaapu’s LUA scripts work. For INAV, there aren’t really any developers pushing the LUA script forwards. There is someone who is fixing issues. But they don’t have ETHOS, nor are looking to get it. It would take someone in the community, who knows LUA, has ETHOS, and would like to contribute time to the project.

  • @didierperronnet1752
    @didierperronnet1752 ปีที่แล้ว +2

    hello Daren many thanks for your video....I can't find the scripts folder on my X20s radio and so I don't know where to put the LUA files ????

    • @MrD
      @MrD  ปีที่แล้ว

      On the X20, the scripts folder goes on the SD card root.

    • @didierperronnet1752
      @didierperronnet1752 ปีที่แล้ว +1

      @@MrD thanks for your Feedback

    • @haroldgough5799
      @haroldgough5799 ปีที่แล้ว

      @@MrD Yes sir, that's where my lua scripts are at on the sd card, standing alone by itself, just the scripts folder containing cali; and sxr . Radio still won't read it..

  • @anthonyjayakody3356
    @anthonyjayakody3356 ปีที่แล้ว +1

    Hi Darren, will you be doing a vid on how to set up a sensor using an SR8 pro or SR10 pro? To an x20 using ethos? Struggling a little and your videos are so informative. Cheers-Ant

    • @MrD
      @MrD  ปีที่แล้ว

      Hi Ant. Sure, I can make a video on setting up SmartPort/FBUS sensors. It’s the same on all receivers.

    • @anthonyjayakody3356
      @anthonyjayakody3356 ปีที่แล้ว +1

      @@MrD nice one Darren, much appreciated and hope you’re well.

  • @tedh173
    @tedh173 ปีที่แล้ว +2

    Hi Darren great video to help us!
    I have the X20S FCC version and I already used EthosSuite to update my X20s with the latest Firmware ver 1.4.9, FCC already.
    Do I still need to update my X20s to the latest RF Firmware ISRM -TD Module to ver TD 2.2.4. Are they separate software components.
    When I go to the info screen, i only see the Firmware Version 1.4.9. But i don't see the Internal Module TD-ISRM version info. Why is that.
    Thanks.

    • @MrD
      @MrD  ปีที่แล้ว +1

      Thanks Ted. Yes, they are two separate firmwares. So you will need ti update both. You will only see the version of the internal module if it is enabled in the current model.

  • @eoinj3929
    @eoinj3929 4 หลายเดือนก่อน

    Hi Darren, They released a new LUA tool set for the Archer SR10 plus this week. Can you do a new vid for it please. Many thanks EJ

  • @kolbyblaine8144
    @kolbyblaine8144 10 หลายเดือนก่อน

    Thank you

  • @jamesperkins7329
    @jamesperkins7329 ปีที่แล้ว

    Hi Darren, thanks for the video. I am a bit confused you about the receiver you are adding the Lua Script to FW up date. You are saying you are updating a Archer 10 plus but you showing a SR10 pro. Do you use the same Lua script for Eather one of those receivers? would the same download be for both of them. I look the download for the SR10 pro Lua Script it said it is for open TX. I have a SR10 pro receiver. Thank you.

  • @aurelienwittmann4105
    @aurelienwittmann4105 9 หลายเดือนก่อน

    I’m curious if this is possible for open TX running edge tx. The receiver is a archer s8

  • @SergioElPichi
    @SergioElPichi ปีที่แล้ว +1

    Hi dude! Why can I see the lua scripts icons in GENERAL??? I have a X20S, Regards!

    • @MrD
      @MrD  ปีที่แล้ว

      At the moment, the new scripts are located in the SYSTEM menu. I believe they will be properly located in ETHOS 1.5.

  • @stephenhughcrisp
    @stephenhughcrisp 9 หลายเดือนก่อน

    Hi, I’m trying to calibrate the TD SR 12 receiver. I can’t seem to get the icons that you get on your radio. The one that appear after the info icon. I downloaded the Lua scripts, but I think I’m putting them in the wrong place???? Please help.

  • @dercoder2057
    @dercoder2057 ปีที่แล้ว

    When will the video of the maiden flight of the Sonicmodell Baby AR Wing be released?

  • @RC-Jetprint
    @RC-Jetprint ปีที่แล้ว

    Hi mate, thanks for that vid again….Still have problems with X20S, SR10+ Receivers….Everything is up to date and Lua Scripts also…As soon as I turn stabilisation on, there will be no output on the channels, just on gas…I tried it now with the second SR10+ and both show the same issue…Maybe you can show the combination of SR10+ together with the X20S in one of your next vids…by the way you can turn back to page 1 in Lus by longer pressing the Return button….Best regards and keep up your brilliant work.

    • @leohcheung
      @leohcheung ปีที่แล้ว

      Sounds like it's the infamous "Self Check" procedure again. Perhaps You have inadvertently limited channel movement to 0%. Advice is to never activate "Self check"

    • @Schippi2001
      @Schippi2001 ปีที่แล้ว

      How can we fix that problem? Probably I’ve got the same issue. Thanks!

    • @leohcheung
      @leohcheung ปีที่แล้ว

      @@Schippi2001 the best solution is never do a “self check”…it sounds crazy but all it does is to reduce servo travel limits on each axis. Unless you have very bad servo geometry using a less than 30 per cent of servo travel, this is never a problem anyway. I have used dozens of frsky gyro receivers without ever selfchecking or calibrating. Now, if you must “self-check”, make sure that u do not inadvertently reduce servo travel to zero, which explains the common symptom described in hundreds of frsky S8R/SR10 question threads.

    • @Schippi2001
      @Schippi2001 ปีที่แล้ว

      @@leohcheung thanks for your quick answer! I will check this. But I still have the issue with the non working settings in the tool. In the system menu it works but not in the model menu.

  • @stephen_adams
    @stephen_adams ปีที่แล้ว +1

    LUA scripts are not showing up on the touch screen. I have no means to execute the script. The file manager does not allow me to run the script...only move or delete the file. My zip file had three folders, and three scripts...hope this is right. X20: fully up to date. RX: SR8 Plus v1.05 (cannot find 1.08). What am I missing?

    • @MrD
      @MrD  ปีที่แล้ว

      If the LUA is not showing up in the system menu. It may have been installed in the wrong place. Please check where you installed it, compared to the video.

    • @stephen_adams
      @stephen_adams ปีที่แล้ว

      @@MrD Well, I had put the 3 folders in a subfolder. It did not like that. Everything is fine after placing directly under Scripts. Thanks. Leads me to a new issue. Everything is calibrated and channels set but I cannot turn OFF the gyro. I use the gyro in Quick mode so it is set to Ch14...but nothing happens.

    • @stephen_adams
      @stephen_adams ปีที่แล้ว

      I sorted it out with someone else's eyes. Inadvertently set Channel range to 1-8; which blocked out the gyro channels I needed. All fixed.

  • @roscomonk
    @roscomonk ปีที่แล้ว

    Hi Mr D
    Can you please help?
    I have been attempting to set up Stabilisation.
    All firmware and scripts are up to date.
    The receiver is bound and stabilisation channels 13, 14, 16 haves been set.
    SR10+ Calibration is complete OK
    Self check carried out, all stick gimbals calibrated
    Gyrogain adjustment on Channel 13 working OK
    Flight modes on channel 14 working OK, although I can not see any point with the switch in central position as all it seems to do hold all control surfaces in the central position, the same as when the gimbal sticks are central.(excluding throttle).
    Here is my problem:
    I cannot get channel 16 emergency mode to work.
    I can see the switch is active in the Mixer and also in Outputs, but the control surfaces do not change when tilting the aircraft? Completely dead.
    I have two SR10+ receivers and neither of them work in emergency mode.
    I have successfully set up SR8 stabilisation receivers in other aircraft OK.
    Does anyone out there have a solution to this issue?
    Thanks a lot
    Rosco

  • @jerrykirwan9183
    @jerrykirwan9183 ปีที่แล้ว

    I must congratulate you, on your knowledge of the FRsky system. Were you involved in the development?
    On the SR8 Stabilized RX, how does the RX recognize the 4 controlling channels? I contacted FRsky, BF finding your channel, and they indicated a different channel for the Gain (Ch13) and the modes (but did not specify a channel for modes) BTW what happened to CH11? Why was it overlooked?
    Does the RX have to be powered during the TX programming, to recognize the keystrokes as they are entered?
    It also should not be this hard to program a toy airplane!!!
    Apparently the word 'Intuitive' does not translate into Chinese???

  • @HowardBass-ic7dq
    @HowardBass-ic7dq ปีที่แล้ว +1

    Using the new lua scripts dose the gain channel change from channel 9 to the script to channel 13?

    • @MrD
      @MrD  ปีที่แล้ว

      With the new ArcherPlus stabilised receivers. The stabiliser function channels have changed from 9-12 to 13-16. Currently, the Archer and ACCST stabilised receivers are using old firmware. So they stay on 9-12. I don’t know if that will change in the future.

  • @tomgulizia113
    @tomgulizia113 ปีที่แล้ว

    THANKS I see you plug in the USB in the transmiter and you get a 3 choice pop-up window. I don't get that. Did I miss something? I am up to date on everything.

    • @MrD
      @MrD  ปีที่แล้ว

      Those choices should appear when you plug in a data USB cable. They have been on quite a few versions of ETHOS now.

  • @timmybeetle
    @timmybeetle ปีที่แล้ว +1

    With this new rcvr's is it still possible to enter self check with a switch, ore you must use this lua script?????

    • @MrD
      @MrD  ปีที่แล้ว +1

      You should use the LUA script for self check.

    • @timmybeetle
      @timmybeetle ปีที่แล้ว

      @@MrD Thanks for answering me, I thought so.

  • @locoworks8179
    @locoworks8179 ปีที่แล้ว

    i am really struggling with LUA's and where they should go and how to activate them, when i download SD card contents there are only 2 folders , where do all the others come from and why aren't they there to begin with? it would suit me if the X20s came with an SD card that had every folder the radio could use preinstalled on it , i've given up trying to get the stabilisation in my SR10pro to work , i followed your other video re calibration etc and when i get to the move the receiever part near the end my servo's just don't react even with the gain turned all the way in either direction. radio gear should be easier to use than the experience i'm having. i have updated the radio using the ethos suite and it's all up to date so that isn't my issue.

  • @wtfmimshag
    @wtfmimshag ปีที่แล้ว +1

    It's a little bit clunky to be honest, frsky seem to be releasing product quiker than ethos devs can keep pace with. That said, apart from the missing XT30 connectors which I had really grown to like, and configuration being in the wrong part of the OS, the new archer plus SR10+ is fantastic. Two independent gyros on the same receiver opens up a lot of possibiities. Assuming they release an archer plus 12ch stab rx, i can replace some fairly complicated setups in thrust vectored EDFs with a single rx. Even just having independent yaw stabilised channels means you can effectively use one as a steering gyro, without overcooking rate gain on the rudder. What i'd love to see is independent flight modes for the two stab loops. Frsky are really knocking the hardware out of the park.

    • @MrD
      @MrD  ปีที่แล้ว

      The clunkiness is only temporary. The new tools will be a part of ETHOS 1.5. But yeah, totally agree with what you’ve said.

  • @karljackson2988
    @karljackson2988 ปีที่แล้ว +1

    Hi Darren. Following on from my last comment if i exit the SRX stable menu, when i go back in the options are greyed out. Click open and they light up. Is it supposed to do this?

    • @MrD
      @MrD  ปีที่แล้ว

      Yes. The options don’t do anything if the stabilisation is disabled.

    • @karljackson2988
      @karljackson2988 ปีที่แล้ว

      Hi Darren. I've operated the modes switch and none of the positions activate Stabilisation.

    • @karljackson2988
      @karljackson2988 ปีที่แล้ว +1

      Hello again. I was busy for a few days and came back to this issue again. Been through your video a number of times which are so helpful but was still not getting anywhere. Remembered seeing a manual for my receiver which is an Archer Plus SR8. So I thought I'd download it and take a look. Then I found that I had the switches set on the wrong channels. I just presumed that all the stabilised receivers would work the same. Switched the gain to channel 13, the modes to 14, it says to use 14 and not 15 when using the quick mode and the oh crap, I've called mine panic on 16. Now I've got the stability working, I can see the difference in flight modes ,have the rotary switch working for gain adjustment, thanks to your video. Just brilliant. 👍

    • @MrD
      @MrD  ปีที่แล้ว +1

      Yes, Archer Plus have changed the channels from 9-12 to 13-16. The non-Archer Plus receivers are currently still using the old channels.
      I’m glad you got this working 👍🏻

  • @_F5X
    @_F5X ปีที่แล้ว +1

    do you know why in ethos suite FRSK Flasher -> TD Module (X20/ X20S/ X20HD/ X20HD Upkit) -> latest shown version is v2.2.2 2022-08-06 225KB and not v2.2.4

    • @MrD
      @MrD  ปีที่แล้ว +1

      I’ve never used the FRSK flasher to be honest. If there is an issue. The best place to report it is at github.com/FrSkyRC/ETHOS-Feedback-Community/issues

    • @_F5X
      @_F5X ปีที่แล้ว +1

      ​@@MrD opened a new issue and frsky already solved the problem

    • @MrD
      @MrD  ปีที่แล้ว

      Perfect 👍🏻

  • @radhaclink
    @radhaclink ปีที่แล้ว +1

    slightly off topic but i have a brand new X20S and a TD SR18 and cannot get the SRX working. Updated firmware for both There are no icons on the info page and the SRX under devices somewhat activates but won't accept any settings. The stabilization works but one elevator is backwards and off course I cannot enter any gains. I appreciate your videos, the learning curve with FrSky has been much quicker as a result but i'm stumped on this.

    • @MrD
      @MrD  ปีที่แล้ว

      Check that you installed the LUA script in the right location. That could be what’s making the tools not be shown on the system menu.

    • @aegidiomoresco5982
      @aegidiomoresco5982 5 หลายเดือนก่อน

      I have a X 20 pro trying to use the SR 10+ stabilization. I have tried to install the Luis script on the radio and the flash drive even try to put a SD card in and install it. There cannot get the stabilization to go on the system screen, I read your other comments, and I too have problems at the stabilization works, but Rudder doesn’t sometimes the Arons won’t go both directions and I can’t enable the stabilization

  • @may4092
    @may4092 ปีที่แล้ว

    Can I download the lua script intended for the sr10 pro receiver with my sr8 pro receiver ?

    • @MrD
      @MrD  ปีที่แล้ว +1

      There is no LUA script needed for those receivers. The tools are already in ETHOS.

  • @HowardBass-ic7dq
    @HowardBass-ic7dq ปีที่แล้ว

    Hello Sir! hope you are having a super day. I just installed Sr10Plus receiver and I'm not having good time with it. This how I've got mix page setup. AETR-A2-E2-F1-F2 and 13 is for gain and 14 for mode. When I activate the self leveling mode the flap 8 reacts with the elevator and flap 7 reacts with aileron. I've try couple different thing but didn't change anything, any help would be awesome.

    • @TheovandeLaar-ix6dk
      @TheovandeLaar-ix6dk ปีที่แล้ว

      Hello, I have the same thing dislike it.
      FrSky point to improve " make manual error free and a clear explanation "
      Making hardware is one thing. Communicate by means of manuals is another thing. Please look into this skill it will make your products more interresting.
      Good luck.

  • @haroldgough5799
    @haroldgough5799 ปีที่แล้ว

    And now i can't flash the new 1.0.9 firmware which came out on oct. 20th; just a few days ago. i flashed 1.0.8 just fine but now having problems flashing the new update; keeps saying binding, binding; binding!!! I never had any of these problems with spectrum; i just didn't want to spend 900 - 1300 dollars to gain more channels, this seemed like an alternate choice but i'm not so sure right now; kind of a pain in my back side. What a learning curve it has been, i feel like i've gone to college on electronics!!

    • @MrD
      @MrD  ปีที่แล้ว

      What process are you using to update the receiver?

    • @haroldgough5799
      @haroldgough5799 ปีที่แล้ว

      @@MrD Hello Darrin, i am using bootloader onto my sd card just like you. OTA worked on 1.0.8; but not on 1.0.9; it keeps saying binding until you return out or go back then the receiver will bind up to the radio.

    • @haroldgough5799
      @haroldgough5799 ปีที่แล้ว

      @@MrD Thx Darrin, fixed all my problems for now; keep putting out those videos cause i'm watching and learning.. Fly ur models like u stole them!!

  • @haroldgough5799
    @haroldgough5799 ปีที่แล้ว

    Ok Darrin i'm at a loss here, i have done everything that u did i think but my x18 still will not read the temporary Lua scripts; there are no icon buttons to click on beside the info button, it won't read the scripts. I have the archer sr 10plus just like this one and although the sxr is calibrated and it works on mode select on channel 14, master gains on 13, oh crap on 16. all that works, but on level only i cannot change the orientation of the receiver, nor will sxr enable; self check won't work none of that. Lua scripts are on my sd card just like yours. about ready to abandon this frsky nightmare and go back to my NX-8; at least i know what i'm doing there. Love the videos i wouldn't be as far as i am right now without them; plz help.

    • @MrD
      @MrD  ปีที่แล้ว

      If the icon is not appearing, the scripts are not in the correct location. On the X18, they will probably need to be on the NAND storage, not an SD card. Inside the scripts folder, you should also have folders for the specific scripts. For those tools, there should be SRX_Cali and SRX_Stab folders. Each one containing the relevant files, as they are found in the FrSky_AP_STAB_RX_v2.05.zip file. The safest way to install is to copy the scripts folder in the zip file to the root of the drive on the transmitter. This will ensure that everything is in the right place.
      There is a bit of a learning curve. But trust me, once you're in the swing of things, it's a massive improvement over Spektrum. Spektrum is overpriced and has a bad RF link. So many planes at my club have been lost due to Spektrum's bad signal.

    • @haroldgough5799
      @haroldgough5799 ปีที่แล้ว

      @@MrD Ok thx Darrin, i will try that.

    • @haroldgough5799
      @haroldgough5799 ปีที่แล้ว

      @@MrD No sir, had to load the temporary Lua scripts onto my radio bin; then it found them no problem; nothing else would work.

  • @karljackson2988
    @karljackson2988 ปีที่แล้ว

    Hi Darren. Ive downloaded the latest Lua script, so now i have SRX stable, SRX calibration and SRX basic windows when i go into the system settings. With the receiver switched on, i have module listed at the top of the SRX stable menu. I select open and the options on the lost light up. I can select stabilizing on, quick mode on, select wing type, mounting type and inverse ailerons and elevators. I can operate servos by sticks but no stabilisation. Im on transmitter firmware 1.49, internal module firmware 2.2.4 and receiver firmware 1.05. Ive downloaded the LUA script 2.05. Am i missing a setting somewhere?

  • @FourthWayRanch
    @FourthWayRanch ปีที่แล้ว +1

    if you wanna setup a camera gimble on CH 7,8 you have to turn off "stabilizing" on page 2 otherwise putting it in autolevel mode will make CH7 do funny things for some reason.

    • @MrD
      @MrD  ปีที่แล้ว

      To be honest, it looks like some things on the 2nd page aren't quite right. Like there are settings for Ail 4 and Ele4, on channels. But not Ail 3 and Ele 3. You can set up the gain and things for them. But no turn them off. I would imaging Ail 3 would be on Ch 7, and Ele 2 on Ch 8.

    • @FourthWayRanch
      @FourthWayRanch ปีที่แล้ว

      @@MrD ya, i emailed frsky back and forth, they're fixin it i guess. Now I gotta learn to stop smashing the nose gear landing the A10

    • @FourthWayRanch
      @FourthWayRanch ปีที่แล้ว

      @@MrD can the receiver power 11 servos I got on the A10? Someone was talking about powering servos directly?

  • @crosswindjones
    @crosswindjones ปีที่แล้ว +3

    Please redo all your videos with a Radiomaster Tx16 or any modern EdgeTx radio. There is a real need for information related to NON-frsky radios and binding the new AP rxs.

    • @MrD
      @MrD  ปีที่แล้ว +1

      Sorry. I don’t have a TX16S. For the most part, EdgeTX is similar enough to OpenTX.
      Also, personally I am not a fan of EdgeTX at all. I hate the interface, and there are so many little annoyances that make me stay with OpenTX on my Horus. I know that I will need to move on at some point, as OpenTX is basically a dead system now. But, when the time comes, I’m more likely to move to ETHOS now, over EdgeTX. I’m actually finding that I’m missing stuff from ETHOS now, when I make changes on my OpenTX radio.

    • @crosswindjones
      @crosswindjones ปีที่แล้ว

      @@MrD I had the chance to see a few of the Ethos radios this summer. The OS/UI is really nice but the form-factor of those radios kills me... I wish they would make a modern Taranis. Edge is great though. Keeps getting better.