Donor-you mean on engine? That engine is that? From which car . If you want to buy for 1k€ quad for adult you can buy only some chinese product, so this is basicly sheap and good.
@@vukbiga007 Car was VW Passat B3, i took engine with gearbox(later change to automatic), front suspension, driveshafts and hubs. Engine is 1.9TDI 1Z with mechanical injection pump.
@@0Renxx0 Hello! I am also interested in making a similar project like yours. Why did you changed the manual gearbox? Also what type of automatic gearbox is that? Does have electronic controls? Thanks!
The time, effort and ingenuity that goes into something like this, u bet he was smiling ear to ear on that first drive. Be the ultimate atv recovery vehicle, hell probably pull most jeeps out of the woods.
This thing will still be running good after 50 years and many an oil change or 2.very cool build. I have never seen one of these before so I tip my hat to you good sir.
i don't think that would possible because of double reduction from front wheel drive gearbox with diff to the diffs in the front and back axle plus larger wheels it should be at least half of the top speed of the car from which the gear box came
@N N liceimam snimke ali nisu na yt jos, tek sam napravio i usavrsavam ga, kod mene se sjajno pokazao, diferencijal zadnji je zavaren i medjumostovski tako da nema problema tipa da treba blokada dif i tako to, blokiran je za vjecno 😊
@N N lice ma druze koje osovine sta je ga osovinu od 35mm da trpi sto je zavaren pusti to, on nikakav teret nema kod mene je od juga motor to je lako, nema tu neki teret i on je vise za vozanje u kjesecu 5h necu ga npr svaki dan da vozim pa da sr plasim da otkine, a i da nesto otkine nema veze jer napravio sam njega od nista a kamo li to 😁
@N N lice dif su od mecke 3.23 omjer a imam i dva jos greskom uzeta jedan je od c klase 3.91 a druge 124 3.64 omjer i prodao bih to po 30e ako treba nekome Bice snimak kad sve zavrsim hocu lim okolo da radim i sve zatvorim ovako je ruzan samo cijevi jbg A jasno je to da je najbolje da se blokira rucno kad ti treba ali imas druze traktore sumske zglobne koji su non stop pod teretom ukupno po 20 tona i vise i nemaju u dif trkace nego sve direktno ide i nikad to nije slomio niko
@N N lice trebas koristiti kvacilo pri prizemljavanju da rasteretis transmisiju od vuce, ali sve su to sekunde i jbg A ja sam trazio automatik za ovo i nisam nasao, ako budem sledeci pravio ide dizel motor od golfa 2 i bice samo za vozanje ovako pa putu i malo kroz sumu bez offroad-a Nisam za pretjerani neki off i to Meni nije tezina problem, jer hocu i prikolicj da zakacim nekad pa nek ima i on masu da to nosi Ali ovaj kvad sto je pravio taj lik mi se svidja dobar je i jak a i skrojena konstrukcija
Check new video, with some updates to MadMax! >------------> th-cam.com/video/fxxyzw7uO0w/w-d-xo.html
Renārs Feldbergs this is soo good, i would like to know how much cost you to make this
@@vukbiga007 For me (donor car was mine) around 1k euro
Donor-you mean on engine? That engine is that? From which car . If you want to buy for 1k€ quad for adult you can buy only some chinese product, so this is basicly sheap and good.
@@vukbiga007 Car was VW Passat B3, i took engine with gearbox(later change to automatic), front suspension, driveshafts and hubs. Engine is 1.9TDI 1Z with mechanical injection pump.
@@0Renxx0 Hello! I am also interested in making a similar project like yours. Why did you changed the manual gearbox? Also what type of automatic gearbox is that? Does have electronic controls? Thanks!
I think all the people who gave it a thumbs down should show their build. Personally, awesome job!! Jealous of the motivation and talant....
Well said👌
Yeah you are right
Your right
Mad max would be proud. Great build.
This is one of the best contraptions I've ever seen totally bad ass
Respect man! It's almost like a tractor in atv form. Super cool.
The time, effort and ingenuity that goes into something like this, u bet he was smiling ear to ear on that first drive. Be the ultimate atv recovery vehicle, hell probably pull most jeeps out of the woods.
Yes! Exactly! ;)
This thing will still be running good after 50 years and many an oil change or 2.very cool build. I have never seen one of these before so I tip my hat to you good sir.
Thank you!
Dunno about 50 years but definitely will outlast every Polaris made.
That is by far the coolest ATV build I have ever seen!
Thank you!
Speed is not its thing. Ripping the house off its foundation... thats more its style
I want to do something similar with my old kingquad now thanks for inspiring me
The torque would be incredible!
Awesome. I too build projects, so i can respect the amount of work. Great job!
That's what you call a quad super.
Круто получилось, почёт и уважуха. 😀💪👍👌👏
Still doesn't weigh as much as the new Polaris scrambler
This is beyond awesome.
Some steel plating and a 20mm Cannon you got a proper tank 🤙
Biju ļoti milzīga šokā kad sapratu ka tas ir Latvijā un latvieša darbs, cepuri nost, ļoti iespaidīgi. 😉
Paldies!
This is so freaking cool
If Honda or Polaris was gonna make a diesel this would be the prototype
Artic cat actually had a diesel atv kinds crazy
That is an awesome build !!! AWD !!! Sweet !!! Amazing fabrication work !! Oem front end struts and in the back ! 👍👍
comfort is not an option! Ha ha ha! Incredibel build!
Now that’s real cool. Must have so much torque being so light!!
Gofernator oh ya so light lol
scary fact is that thing will probably go like 120mph in a line.
Not with welded diff
@@pader4471 how much speed can a welded diff take
@@TheAssaultScar speed won't kill the diff, only high speed turns on asphalt will do that.
i don't think that would possible because of double reduction from front wheel drive gearbox with diff to the diffs in the front and back axle plus larger wheels it should be at least half of the top speed of the car from which the gear box came
@@alvydasurbonas8913 possibly not, but the engine would be capable of it with the right reduction or lack there of.
ABSOLUTE UNIT.
This would be amazing in a 50inch web sxs. Like absolutely amazing
Looks like a decepticon from the German countryside
Love the build. I would say the only thing it's missing is ground clearance
33cm ;)
well done my friend !
HOW BRILLIANT IS THAT! UK
That’s pretty awesome!!
Зачётный мототрактор...жму руку...
Great build! Nicely done!
Very, very nice. The only thing I would do is increase the distance between wheels
Заебись аппарат!!!
HIGHLY FUCKING IMPRESSIVE
Awesome job man
Wow, Kick Ass Man !
Very cool build ! That things got some torque !!
200Nm! ;)
@@0Renxx0 do you some kind of plan or drawing ? for the project ? i would like to do one of my own
that is gnarly, I love it!
Awesome
Thanks!
Super Atv
Great Job Man. Respekt, is a nice finished Projekt
Burning a lot of oil, not dissing. It’s awesome
Nice job.
Lower speed gearing = insane tourqe
I love it.
That thing is sick, nice work
Wow...Merica 🇺🇸
Very cool!
It is absolutely awsome, would be ace to do this with the likes of a pd130 asz/arl engine
good job!!!
Bet that thing hauls ass. Cool build!
Incredible
That's awesome , great job 👍🏻
I bet that thing is freaking heavy!
outcold 77
Description says 400kg! But that 1.9 turbo diesel has plenty of torque :)
That's a Beast 💪👌👌👌
Super
sell the bike as a kit,we all want one
💪
That is awesome sir you did a great job,will you do another video of a overview of it and what is her name!!!!
I call it MadMAx [:)]
Quadzilla
Badass.
AWESOME!!!!!
Pretty bad ass
Sick!!!
Nice! Cheers from northern Ontario! What did it weigh? That beast would do some damage with a plow! RIDE ON BROTHER!
Hello from Latvia! It weights around 500kg!
Right on! I like Latvia- Estonia area, I would like to ride there one day! Nice people there too!
quads in 2050 be like🤣🤣
Сильно 👍
Подвеска жесковатая надо другие пружины, а так лайк
I think I know what I want to build😁😁😁😁😁👍
Lets do it!
👍
HEAVY
you rock
Super.
Awesome built, I know this engine cuz I used to have one the 1.9 150hp is pretty solid but how you are doing with the shifter?
AT transmission
😊👍👍👍👍👍👍
Wow, na osnovu ovoga ATV sam napravio jedan slican 😁
@N N liceimam snimke ali nisu na yt jos, tek sam napravio i usavrsavam ga, kod mene se sjajno pokazao, diferencijal zadnji je zavaren i medjumostovski tako da nema problema tipa da treba blokada dif i tako to, blokiran je za vjecno 😊
@N N lice ma druze koje osovine sta je ga osovinu od 35mm da trpi sto je zavaren pusti to, on nikakav teret nema kod mene je od juga motor to je lako, nema tu neki teret i on je vise za vozanje u kjesecu 5h necu ga npr svaki dan da vozim pa da sr plasim da otkine, a i da nesto otkine nema veze jer napravio sam njega od nista a kamo li to 😁
@N N lice dif su od mecke 3.23 omjer a imam i dva jos greskom uzeta jedan je od c klase 3.91 a druge 124 3.64 omjer i prodao bih to po 30e ako treba nekome
Bice snimak kad sve zavrsim hocu lim okolo da radim i sve zatvorim ovako je ruzan samo cijevi jbg
A jasno je to da je najbolje da se blokira rucno kad ti treba ali imas druze traktore sumske zglobne koji su non stop pod teretom ukupno po 20 tona i vise i nemaju u dif trkace nego sve direktno ide i nikad to nije slomio niko
@N N lice trebas koristiti kvacilo pri prizemljavanju da rasteretis transmisiju od vuce, ali sve su to sekunde i jbg
A ja sam trazio automatik za ovo i nisam nasao, ako budem sledeci pravio ide dizel motor od golfa 2 i bice samo za vozanje ovako pa putu i malo kroz sumu bez offroad-a
Nisam za pretjerani neki off i to
Meni nije tezina problem, jer hocu i prikolicj da zakacim nekad pa nek ima i on masu da to nosi
Ali ovaj kvad sto je pravio taj lik mi se svidja dobar je i jak a i skrojena konstrukcija
Thank you for discussion! dont forget to share your atv videos! ;)
Is the engine on the 4x4 car or is the differential on the gearbox welded? Thank you
Engine is from FWD car. Diff in gearbox welded.
@@0Renxx0 Thanks a lot for the information. All the best.
👌
Id be sketched out about something grenading in my face
well done i can imagine the hours going into this 😂😂 but holy fuck thats big 😂😂 if that thing rolls on you your fucked xD
Excuse me, did you weld the rear diff or it’s open, or it’s lsd?
Rear welded, front LSD
Rica atsem bastan yapımını cekermisiniz
I came here from a post on facebook. Who else?
Me!!
What have you done with the differential? Are they all open? Or have you welded the centre differential?
Gearbox and rear diffs welded
Awesome! How much is this?
How to make??? Good video
Were is smokey ?
Nice from what car did you take the parts?passat?
Suspensions and engine from passat b3, diffs from BMW E34
Why? Because he can!
how its mas this quad ?
Thats badass man what motor u got in it?
Probably a Volkswagen 1,9TDI
Yes! 1.9TDI from VW Passat B3
Nice! It has a nice rumble to it good job on the build
basiclly an engine With a frame and some differentials and Axels and steering :D
Where was this filmed
In Latvia, in turf swamp...
is that diesel atv?
yes, 1.9tdi diesel
В Юкках гоняешь?
Скорость какая максимум
50-60km/h
@@0Renxx0 да это маловато я ездию движок орет а скорости не хватает
@@ГАРАЖ48-я4ь для бездорожье хватает за глаза
@@0Renxx0 у меня из оки по полю на четвертой прет движок на разрыве конечно лучшеба км до 80
Доброго время суток.а с чего стоит передний и задний редуктор?с блокировкой? спасибо.
Привет! Редуктора от BMW E34 2.5TDS 2.65, в передний редуктор план поставить ЛСД. с вами подписка на канал! ;)
Уже подписан)
А какое расстояние от заднего колеса к переднему по центрам?и на сколько резина стоит у Вас?спасибо))))
@@vanek86 160cm, 78cm ili 30,7''
Класс...