Oscilloscope: s.click.aliexpress.com/e/_DCzw3tB First order bonus: s.click.aliexpress.com/e/_EH0TnXO X3Pro Turbo Jet: s.click.aliexpress.com/e/_EyWP0ZO 160000 RPM Turbo Fan: s.click.aliexpress.com/e/_Ew4r88G Become a channel member: th-cam.com/channels/YXUe7VF9KN-ASABNHN0pCw.htmljoin
Can you explain to me your installation for connecting the st link to the controller? You have connected two cables and glued two manually, I have 4 female connectors on my st link.
how risky is this? since i have a g2 max and i want it to go 35km/h instead of 25 but i just wanted to know if i can reverse it or if the damages would be minimal
Hi, this is a pretty sick content, thanks for you contibution :) Quick question though, I had the same update on my G2 last night as you have @28:00 (also purchased the licence through your link with the code - awsome!), went through with all 3 steps and finished with "scooter updated" and now I can set pretty much all parameters in xiaodash, HOWEVER I did NOT took apart my scooter, hence I could NOT ST-Linked it either, all I've done was over BT. Is it then a "light" hack I have on scooter? I could not have time to ride it that much yet but it definetely goes faster 22mph but nowhere near 30 mph (45kmph) Many thanks and once again pretty good content!
Hello, thank you for your video. I have a question. I made all the settings in xiaodash like yours I have a NinebotG2 D max yesterday night I was driving and suddenly the numbers on my dashboard turns red for about five minutes after that they turned white again. What does this mean? Is it dangerous for my engine or something?
@@misterel7684 maybe it is because of the motor temp. I lowered it in the video and maybe you reached the temp. Try increasing it to the stock values and see what happens. You can also ask on the xiaodash telegram channel. They can tell you for sure
Hi i st - link flashed my f2 pro with Re Flasher and then flashed the BLE from a G2 on my scooter and then installed the SHFW. Whats like the fastest i should go without frying my cables and controller? the scooter is from 2023.
Dose it also work with the controller fron the ninebot max g2 für Germany. Because app says yes but i dont want to buy the cables and everything and then it doesn't work
Hello, yes it works for all G2 models. The controllers are identical only the serial number is different and that makes it run slower. You can also use the scooterhacking reflasher to downgrade yuur controller and change the serial number to the global version. Once you downgrade the controller, you are able to flash scooterhacking utility via bluetooth. The scooterhacking software will be available soon and it is free. Xiaodash is already available, but you have to pay for it.
@@BerlinCity23 for downgrading you need the windows program called reflasher. I used an older version in one of the scooterhacking for noobies videos. It is similar to the g30 controllers. You just need to connect the wires like i did in the xiaodash video. If it is to difficult for you, you can send me your controller for the downgrade or i can send you a new downgraded controler or one with xiaodash. www.scooterhacking.org/forum/viewtopic.php?f=14&t=676
As far as i know there is currently no hacked fw for the G65.. maybe in a few months. Just visit the xiaodash or scooterhacking.org telegram/webpages from time to time to check if a hack is available.
@@ivanbilandzic6571 yes, i also flashed the replacement controller wlth xiaodash and it worked. Just need to connect it first to the scooter, to get the Scooter ID and activate it.
Probably Yes.. maybe the ball bearings will need to be replaced a bit earlier. They are not the best ones. Just don't park it in the sun (keep it cool), always check the tire pressure, make sure every bolt it tight and keep it dry and clean, charge it to 100% and let the BMS balance the batteries before the ride. Make sure to keep the charge at 50~70% when not in use (over winter). Often the users are the ones who destroy the devices because they do not know how to use them and then they blame the manufacturer. (Driving a car at 50km/h at 4th gear uphill with 1000RPM and trying to accelerate without shifting down = Bye Bye Motor) i don't know your weight, weather, terrain, driving style so i can not say if it is going to be fine or not. For a lot of people it is.
Installing xiaodash works 100% also on the EU and DE edition. As far as i know EU models can also reach this speeds (so far) The only think that could be different is that at some point Segway limits the max BMS current of some or all models to 25A or sth like that. Thats my experience with the G30s produced after 06.2023. If the BMS is limited to 25A then the topspeed is lower for sure (~38km/h) I only flashed the Global edition as you saw in the video. I will probably flash a EU Edition thats produced in mid 2023 soon and can report back. Best option is to get it asap and you can also ask on the xiaodash telegram channel.
@McKuc do need to order this board or can I use the one in the scooter? Sorry that I have to ask so much 😅 I'm not really a genius when it comes to technology things
Oscilloscope: s.click.aliexpress.com/e/_DCzw3tB
First order bonus: s.click.aliexpress.com/e/_EH0TnXO
X3Pro Turbo Jet: s.click.aliexpress.com/e/_EyWP0ZO
160000 RPM Turbo Fan: s.click.aliexpress.com/e/_Ew4r88G
Become a channel member: th-cam.com/channels/YXUe7VF9KN-ASABNHN0pCw.htmljoin
Can you explain to me your installation for connecting the st link to the controller? You have connected two cables and glued two manually, I have 4 female connectors on my st link.
@@PlaySunSizz the installation cable explaination can be seen here: th-cam.com/video/TRh_jxnO4sE/w-d-xo.html
how risky is this? since i have a g2 max and i want it to go 35km/h instead of 25 but i just wanted to know if i can reverse it or if the damages would be minimal
@@zen6493 what damages?
@ like would the life span of the scooter be shorter, or would the risks be minimal, like all and all is it actually worth it
@@zen6493 th-cam.com/video/iSZz0SfuARw/w-d-xo.htmlsi=GDLkjz2m-OTSRtFh
Thanks for the review. Do you know if the custom horn sounds work? I have the option in the Dashboard but horn sound is still the same
I dont know. Never played around with the horn sound settings.
Hi, this is a pretty sick content, thanks for you contibution :)
Quick question though, I had the same update on my G2 last night as you have @28:00 (also purchased the licence through your link with the code - awsome!), went through with all 3 steps and finished with "scooter updated" and now I can set pretty much all parameters in xiaodash, HOWEVER I did NOT took apart my scooter, hence I could NOT ST-Linked it either, all I've done was over BT.
Is it then a "light" hack I have on scooter? I could not have time to ride it that much yet but it definetely goes faster 22mph but nowhere near 30 mph (45kmph)
Many thanks and once again pretty good content!
@@thegabormate stock controller? 🤔
@@McKuc Yes, it is. Can you check from the xiaodash details?
@@thegabormate check the esc firmware version under basic (info) in xiaodash.
You have to st-link it to install xiaodash. There is no other way
@@McKuc 8888 is the Esc fw
Hi, what should the ESC fw be, please?
Hello, thank you for your video. I have a question. I made all the settings in xiaodash like yours I have a NinebotG2 D max yesterday night I was driving and suddenly the numbers on my dashboard turns red for about five minutes after that they turned white again. What does this mean? Is it dangerous for my engine or something?
@@misterel7684 maybe it is because of the motor temp. I lowered it in the video and maybe you reached the temp. Try increasing it to the stock values and see what happens. You can also ask on the xiaodash telegram channel. They can tell you for sure
Hi i st - link flashed my f2 pro with Re Flasher and then flashed the BLE from a G2 on my scooter and then installed the SHFW. Whats like the fastest i should go without frying my cables and controller?
the scooter is from 2023.
I do not have the F2 Pro. Best option is to ask in the telegram channel of shfw
Dose it also work with the controller fron the ninebot max g2 für Germany. Because app says yes but i dont want to buy the cables and everything and then it doesn't work
Hello, yes it works for all G2 models.
The controllers are identical only the serial number is different and that makes it run slower. You can also use the scooterhacking reflasher to downgrade yuur controller and change the serial number to the global version. Once you downgrade the controller, you are able to flash scooterhacking utility via bluetooth. The scooterhacking software will be available soon and it is free. Xiaodash is already available, but you have to pay for it.
@McKuc hi, okay so that means I can use the controller which is already in the device within any problem. I need st link and xiaodash right ?
@McKuc okay do you got a video on how to do that ? I know the app scooter hacking utility but I'm not sure how to use it correctly 😅
@@BerlinCity23 for downgrading you need the windows program called reflasher. I used an older version in one of the scooterhacking for noobies videos. It is similar to the g30 controllers. You just need to connect the wires like i did in the xiaodash video.
If it is to difficult for you, you can send me your controller for the downgrade or i can send you a new downgraded controler or one with xiaodash.
www.scooterhacking.org/forum/viewtopic.php?f=14&t=676
Hey I have a stock G65 max, I made it 32km speed by changing region. How can i make this scooter 40-45km speed?
As far as i know there is currently no hacked fw for the G65.. maybe in a few months. Just visit the xiaodash or scooterhacking.org telegram/webpages from time to time to check if a hack is available.
Dis is great great great wideo..i hope only mine wont burn out!
Hvala, Just don't push it to hard. Maybe lower the values for Super Boost a bit ;)
Ja ču zamjenit kontroler da dobijem 35 kmh sa xiadash..jeli i tad mogu ove postavke?
@@ivanbilandzic6571 yes, i also flashed the replacement controller wlth xiaodash and it worked. Just need to connect it first to the scooter, to get the Scooter ID and activate it.
Does this scooter hacking work on other make and model scooters?
Just visit the xiaodash or shu official websites to find out more
How to remove the pin security?
In the Segway App there is an option to enable and disable it.
@@McKuc I dont know the code and it does connect to the app without unlocking it
@@McKuc is there any way to flash the dashboard of g2 and f2?
di is have to pay for xiao dash to flash my scooter?
Yes
How do you think, if I ride my G2 an 35kmh daily, it will be fine?
Probably Yes.. maybe the ball bearings will need to be replaced a bit earlier. They are not the best ones. Just don't park it in the sun (keep it cool), always check the tire pressure, make sure every bolt it tight and keep it dry and clean, charge it to 100% and let the BMS balance the batteries before the ride. Make sure to keep the charge at 50~70% when not in use (over winter). Often the users are the ones who destroy the devices because they do not know how to use them and then they blame the manufacturer. (Driving a car at 50km/h at 4th gear uphill with 1000RPM and trying to accelerate without shifting down = Bye Bye Motor) i don't know your weight, weather, terrain, driving style so i can not say if it is going to be fine or not. For a lot of people it is.
I drive mine 2years already nothing till now
Does the flashing work for f2 1.4.12 ?
@@bilbobaggins492 i think so
Does it work also on the europe editon 25kmh max?
Installing xiaodash works 100% also on the EU and DE edition. As far as i know EU models can also reach this speeds (so far)
The only think that could be different is that at some point Segway limits the max BMS current of some or all models to 25A or sth like that.
Thats my experience with the G30s produced after 06.2023.
If the BMS is limited to 25A then the topspeed is lower for sure (~38km/h)
I only flashed the Global edition as you saw in the video. I will probably flash a EU Edition thats produced in mid 2023 soon and can report back. Best option is to get it asap and you can also ask on the xiaodash telegram channel.
Hello brother, have u tried to flash EU version?
@@KR1SR1GH7 don't worry it works
Because i cant order the other controller over aliexpress
s.click.aliexpress.com/e/_DeterFd
@McKuc do need to order this board or can I use the one in the scooter? Sorry that I have to ask so much 😅 I'm not really a genius when it comes to technology things
@@BerlinCity23as i already wrote, all original g2 controllers can be flashed. The region does not matter!
WHAT THE FUCK? HOW FAST DOES THAT G2 GO?
07:50