28 Reasons Why THIS Should Be Your First Laser | WeCreat Vision
ฝัง
- เผยแพร่เมื่อ 30 พ.ค. 2024
- Taking a look at the new WeCreat Vision. It's a laser cutter and engraver that's really straightforward and budget-friendly, making it a solid pick for anyone curious about starting with laser cutting and engraving. It's compact, easy to use, and packs enough punch for both beginners and hobbyists. I'll go over what makes it stand out, especially against the more expensive options, and show you what it can do. Even if you're not big into laser cutters, this one might just change your mind.
Laser provided by WeCreat. Get your WeCreat Vision here: bit.ly/3HKkHv5
Use coupon code 'MakeSomething' for an additional $100 off.
Join the Make Something Patreon to get weekly behind the scenes, early access, ad free videos and discounts: / picciuto
★ TOOLS USED (Affiliate Links)★
Stanley Bottle: amzn.to/48hD4SR
CA Glue: amzn.to/3smSPbY
Random Orbit Sander: amzn.to/2aXutIU
Veneer: amzn.to/3w81j8J
Spray Contact Cement: amzn.to/3usL5qk
Knife: amzn.to/48adjUD
Tape Dispenser: amzn.to/49cirZU
Tape: amzn.to/42zl6Kq
Wood Glue: amzn.to/498J8P3
Cutting Mat: amzn.to/49twxpn
Iron: amzn.to/49twvxL
Flocking Fibers: amzn.to/3HQbTEd
Flocking Adhesive: amzn.to/3HUrna4
Flocker: amzn.to/3ukIGhB
Finish: amzn.to/499nSIW
Flask: amzn.to/48bEcaH - แนวปฏิบัติและการใช้ชีวิต
No honey, I don't know where the kids lunch money went to, but I made this box they can put their tears in.
I love this comment
We use this machine for our Etsy shop and have no problem keeping up!
so you dont sell much stuff then?
@@woodknack1 I make 200k a year on mine and this helps me out big time
I’ve been trying to decide what laser to get and this just made up my mind. THANK YOU.
This is a model-maker’s dream.
It is a pretty good starter laser. I did 3 videos for them a few months ago and was impressed with the ease of use. Although you did an infinitely better job of demonstrating this. That was a great overview.
“Classy as af” made me laugh harder than it should have.
That box came out incredibly, I am loving your pieces done with lasers that don’t look like they were lasered!
You’d be surprised that 20w probably could cut 1/2” walnut especially if you can add in your own air assist. In my experience the wattage on these 20w diodes lasers seem actually more powerful than what you’d see on say a 60w Co2. That being said I just keep ignoring the emails from Wecreate 😂 so I can’t say for sure with their machine in particular.
I have always been inspired by your videos. thank you for being consistent.
That box came out flocking great!
Might try it with my diode laser at some point. Thanks for the video, Dave.
That looks fantastic, and the box was incredible from it. Going on my shopping list thanks.
I love Lightburn. That box came out great!
That box was great. It does not connect to Lightburn, you export GCode then import.
You will love Lightburn David. I’ve been using diode lasers for two years now and Lightburn is hands down the best. What I like about the we create software (don’t own one, but from what I’ve seen) is when material is selected, it puts a test card in the corner and you just select the finish you like. Great video
Seems like a decent product for the price point. Always good to have choices. Thanks for sharing!
Is it actually fair to compare price between diode lasers and CO2 lasers? I don't think so
This whole video was one big ad even if he didn't try to be a salesman
He did actually say that, right there in the video
Very cool laser would love to have one and learn how to use it. Thanks for sharing
Pretty impressive machine, Dave! Awesome review! 😃
Stay safe there with your family! 🖖😊
Thanks!
Great video. Fair review. Mahalo for sharing! ❤️🙂🙏
Thanks for the info I just ordered one based on your review. Plus there is a $100 new customer discount.
Great video demonstration of this laser. I don’t currently have one and not sure this is the one I’d buy, but it’s nice to have options.
That’s a fine looking box made with a fine looking laser! If I was in the market for my first this would be high on the list!
Great video for laser starters! Having had expensive lasers like you, I would NOT recommend getting a filtration unit for cutting wood, the regular pre-filter and the post (expensive) carbon filter will choke very quickly due to the wood resins (especially woods like balsa and liteply). They're ok for engraving "tat" on aluminium tumblers etc. 'tho.
The problem is that if you dont have filtration you're opening yourself up to neighbor and by-law action if you're exhausting fumes outside.
Beautiful box! (Like your mum! Throwback! )
Fun to see that there are some easy to use lasers at lower price point coming out, so we don't all just need to look at the Glowforge and weep because we can't afford it!
The website price changes for anyone thinking of purchasing. It was $1640 when I first clicked. When I went to the product page, it was then $1799. (Referral, I guess) I added it to the cart to see if it was in a different currency since it was more then what was said in the video, USD. I left and came back, now $1199. Weird.
Wooden veneers are an awesome use case you don't see enough people showing off with lasers. Thanks for the awesome review, killing it as always!
I have looked seriously at adding this machine to my laser room ... but the Lightburn issue has kept me from pulling the string. Unless something has changed recently, the "Lightburn compatibility" claim is a bit misleading. Unless I am mistaken, you can create your project in Lightburn, but must export it to a GCode file, which can then be loaded & run in the Wecreat. On my other 2 diode lasers, there is no need to export/import files, and Lightburn directly controls all laser functions. Otherwise, this is a great machine.
Seems pretty great for a first laser. I bought an Xtools d1 10w with a bunch of accessories on sale a year or so ago for about $1000. Still had to get a fan to vent out my window and build an enclosure. Plus a 3D printed z-axis extension so I could keep the risers on at all times. All that to say everything this includes for the price is pretty incredible and way more convenient! I’m kind of jealous. One thing I liked about the Xtools D1 was that I could put any size material under it since it was just a frame I could place on top of things… then I built my enclosure and quickly realized I will likely NEVER place my laser on a large object and it stays in the enclose which makes it basically like this one… but significantly less convenient. Plus I had to built it and it doesn’t have a camera. Tempted to sell what I have and get this instead.
Nice budget laser, thanks for sharing it.
It's not a budget laser.
The CORRECT way to say it is, "Classy as Flock" 😛 Nice machine, never heard of them until this. Nice video and demo too
I like that they're not just trying to mine all of your data like other companies
will it work with Lightburn? so I can learn and then grow.
Nice box
I’ve been seeing lots of post on this laser lately. Might have to get one to test out on my channel. I do like seeing how it is enclosed. I hate how 95% of the lasers i test for my channel have no enclosure.
Great video, thank you for putting it together. At the end of the video, you say this laser isn’t for someone with an Etsy shop. We have a small Etsy shop as a side hustle (mainly at Christmas) and currently using a sculpfun s10 but looking to upgrade to the next level (not quite co2 level yet), any recommendations?
ARGHHH! Their website is impossible to navigate. Just to ask them a question navigates you into captcha hell. Why should I want to do business with a company like that? Edit: Apparently my inquiry did go through and someone may reply to my question. The captcha thing is still an issue but that ire should probably be directed to whatever effing fool is programming captcha. Will see probably Monday if they can process the materials (.008" thin sheet steel and .014" copper clad pcb) that I am using. Thanks David for presenting this possible solution to my fabrication task.Edit 2: To their credit they did get back to me today. Sadly my materials are not what they can cut. Dang!
Lightburn for the win 8-)
To some, that might seem small, but I think in this case, it's an advantage. I can relate.
Great review video thanks Dave. Out of interest what is that funky looking tape machine you were using :)
Adam Savage did a vid over on tested. They're unholy expensive but also hecking cool
@@wayneswonderarium thanks 👍🏻 I found it and will now commence pretending I won’t buy it for a few short weeks 😂
You had me at not having to create an account and doesn't need internet access!
Would you recommend it for a middle school maker-space/classroom?
Thanks Mr. Dave. I will now be short $2000 but plus 1 laser cutter
What's the little display you have on top at 8:36 ?
I'd love to see you compare this with the XTool S1.
*For the Price it's pretty cheap for making small things, it's pretty Good!!* 🌟👍🏻
*I'm waiting for your xTool P2 video on the 2nd channel and can you please make a Rayjet Laser Machine Review or Comparison of Rayjet vs xTool P2 pl?*
*I'm getting Rayjet R400 in 7200$ and xTool P2 with all in 1 bundle 5855$ and I'm confused to which should I get?? Coz there are lots of pros and cons and + a big space issue which will cost a lot!*
*Wht your advice suggestion to which should I get??*
❤️👍🏻
Hey! Nice video and thanks for all the informations. I am looking for a Lasercutter, that can cut and engrave clear acrylic. Can the WeCreat Vision do so? Could only find pictures of colored acrylic. Thanks and best wishes
No, diode lasers can't cut clear acrylic.
I'm betting your con about the order it does the vectors is from the software. You can probably remedy that either in a setting in their software (now or in an update if they do) or by using another software like lightburn.
Would love a follow up
I would love to have a galvo laser in a similar package. I have never seen one.
Seems to be a decent starter. All lasers and CNC machines are intimidating because if you’re not computer savvy then it can be frustrating. I got one and still can’t figure out how to use it because there’s no help to get it going.
Please re-review this unit when you try it with Lightburn as I may do tasks in a single pass on the vectors as you can set things up in groups and other optional priorities.
Toledo hosts a great laser wood working business - stadium map art.
But how long to cook a Pop tart?
Forget the laser, let's talk about that CNC tape dispenser.
Really liking your video mix as of late! Very well rounded. Great job of not "selling" a product but showing why it may or may not work for you if you are interested in a laser.
Do you have the files for the box available
Send me an message from my contact form on my website and I'll share my .svg files
Well done AD. "I'm not trying to be a salesman" he says but transparency stating sponsored or promotional video would be appreciated.
How did you know we were shopping for a laser? Nicely Job!!!
If it wasn’t for my latest divorce, I’d be grabbing this up. I guess I’ll have to wait for WEN to come out with a laser. Until that happens, I’ll have to stick with my Etch-a-Sketch.
Great video as always.
I really should wait till the end of the video before commenting.
Ha! I got an X-Tool add on this video lol.
This video made me buy however from Amazon and not from the link because I'm used to buy from Amazon because of their safe return policy. I know that you get commission and you deserve it and I even gave up $100 discount what do we are simply used to buy from Amazon because of the return policy. It's crazy to give up $100 for that....
Oh I get it! Thank you!
Great review! I'm looking for a 20W desktop to add to my 10W. This looks like a contender since it is compatible with Lightburn.
Sidenote: Why TF haven't you started using Lightburn yet? Dude???
So it looks like of the 198 countries in the world they are willing to ship it to only 2. Great.
The captions keep saying "dialed laser" instead of "diode laser." It wasn't until the comparison to a CO2 laser that I realized WTF a "dialed laser" was.
I told myself not to glue on my cutting mat.
I know what you mean 😢
Correction: You've had FIVE different laser cutters and one "3D Laser Printer" with a magic button on it. #suckitglowforge
Hi David, this video didn’t pop up in my algorithm. I had to search for it in your stream. Just wanted to let you know. Love the work you’ve been doing!
Is this an ad or a review? Were you paid to create this video?
This has to be paid. No mention of lightburn software, 1,200$ for a 20w laser. Better options out there for cheaper.
Listen to your voice doppelgänger…the game show host, lol
th-cam.com/video/wkG_8BrAROM/w-d-xo.htmlsi=zI9duhG9zjYY_pPD
Laser some holes.....pound some tags
Laser some holes.....pound some tags
I have an xtool and a cnc machine, can't figure out either one and I'm beyond pissed. Had the x for over 2 years and the cnc 7 months and it won't do one simple fing project
It's not the laser, it's you.
They lost at $1200 for 20w. 20W diodes are notoriously easy to overheat as people try to tax how much it can do and a diode laser never should really be ran more than 80% power. For that kind fo money regardless how nicely its packaged with other features, id be expecting at least 40-50w diode. Resolution doesn't matter by wattage, as that is purely properly setting things up in the process. Having a 40w laser wont run you any better or worse resolution at 25% power setting than a 20W laser would at 50% power setting.
8 years experience with lasers and you still havent used Lightburn?!?!?
Woah. This is a laser engraver. Stop. The other ones you mention at the start of the video are laser cutters. In other words, diode laser on this thing versus CO2 laser on the others. CO2 lasers are close to an order or magnitude more expensive (in general) than diode. So while $1200 is an attractive price for a fully enclosed laser product, this isn't some magical amazing deal when comparing against Gweike, Glowforge, Polar, etc. Diode lasers are cheap.
One of the reasons I'd need a lser is to cut acrylic. Clear acrylic. And no diode laser can do that. :(
As far as stencils go, another good use, Cricut or Silouette is a much cheaper option for that, and you can go unlimited length.
I don't understand. It looks like it clearly shows cutting out those pentagram shapes from 3mm ply.
Wow! love your WeCreat laser demo - great job!👍 That said, in the video section at 13:50, you mentioned you wouldn’t recommend an Etsy store using this laser. I have to disagree. There are tons of videos of folks using the Glowforge Aura for their Etsy shop, and that is only a 6-watt laser. Would I recommend any of the Glowforge lasers? Absolutely NOT! I will be posting a video explaining WHY I DON’T Recommend GLOWFORGE LASERS on my TH-cam channel soon:
th-cam.com/channels/HWUzECNry0JBD1xzY8P1dA.html
I recently ordered the WeCreat with Air Filter and Rotary attachments, which should arrive any day. WeCreat is a major step up compared to the Glowforge Aura, being a 20-watt laser versus the 6-watt for the Aura. The Aura is targeted towards crafters, just like WeCreat. The benefits of using the WeCreat to create almost any crafting ideas are far superior to the Glowforge Aura. Yes, this video is not about Glowforge or a comparison, but I bring the Glowforge up because it’s another brand of laser focusing on crafters as owners for this laser are selling their products on Etsy that are limited to just 6 watts. If crafters are selling their products on Etsy made from a low watt laser, then WeCreat is no exception, plus the possibilities anyone can create from a 20watt laser.
So, can you imagine what can be done with the WeCreat, which is a 20-watt laser? If you’re suggesting mass production with the WeCreat, you're absolutely correct (to a degree). But in no way would I suggest that the WeCreat isn't suitable for Etsy or any form of online storefront.
Most 20-watt lasers are a sweet spot for crafters. They allow for intricate fine engraving designs while still having the ability to cut. Many types of woods, greeting cards, fabric, mugs, vinyl, or tumblers that were engraved or cut from 20-watt lasers are sold on Etsy and other online storefronts. 20-watt lasers are becoming a growing trend within the craft industry, and WeCreat is no exception. Therefore, to anyone reading my comments, I would highly recommend the WeCreat. WeCreat Valentine’s sale ended. It was on sale for $1,199. But, another sale is happening at this time of posting, $1,299. I would wait for the sale to come to $1,199. That is my suggestion. 😎
classy as af? you know what the a in af means? (as)
It must be advert week for youtubers
You mean to tell me that self employed business owners run their businesses as if they’re businesses?
Oh, the shock! The horror! 🙄
Thanks!