Did We Just Build The LARGEST CNC On Youtube?
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2024
- We moved into the Dream Shop about 3 months ago and we're super excited to finally get out CNC up and running, with a few additions to the existing set up!
Check out AVID CNC - bit.ly/JM_Avid
Check out Black Box Vacuum Pumps - bit.ly/JM_Blac...
Want to see more from the Dream Shop ?
-EPIC Dust Collection Upgrade in the Dream Shop! - • EPIC Dust Collection U...
- EPIC Office Remodel on a Budget in The Dream Shop - • EPIC Office Remodel on...
- HUGE 25ft. Lumber Wall Build in the Dream Shop! - • HUGE 25ft. Lumber Wall...
- The Best Upgrade you Can Make To Your Shop- • The Best Upgrade you C...
WE FINALLY HAVE POWER In The Dream Shop! • WE FINALLY HAVE POWER ...
Epic Wall Transformation in The Dream Shop! • Epic Wall Transformati...
- I BOUGHT MY DREAM SHOP!: • I BOUGHT MY DREAM SHOP!
-We Build A Soundproof Room in the Dream Shop: • Why Does This Soundpro...
- EASY Beginner Basic Tool Workbench Build!: • EASY Beginner Basic To...
SQUIRRELLY STICKS ARE BACK - bit.ly/JM_Squi...
MERCHANDISE - shop.johnmalec...
PLANS - www.johnmaleck...
SAFETY GLASSES - amzn.to/2zhWvRl
Proudly Supported By:
Woodcraft - bit.ly/JM2021_W...
Timberland PRO - bit.ly/JM_Timbe...
Oneida Air Systems - bit.ly/JM_Oneida
Lincoln Electric - bit.ly/JM_Lincoln
Total Boat Epoxy - SAVE 5% : www.totalboat....
My Top Tools and Product Affiliates
Woodworking Tools - kit.co/JohnMal...
Metalworking Tools - kit.co/JohnMal...
Favorite Finishs - bit.ly/JM_Rubi...
My Camera Gear - kit.co/JohnMal...
#CNC #DreamShop #DIYCNC
The best “Figure it out as you go” channel on TH-cam.
The best ‘Channel ‘ on TH-cam full stop!😁
What about AvE?
Jordan, Sam excellent work love how you guys check your work and square as you go can’t wait to watch Jordan slay some slabs on this thing I work at a cabinet shop and we use bungee cords to suspend our dust collection to the CNC definitely not as sleek as the pocket rail system but definitely efficient as the CNC moves away the hose moves with but also contracts as the CNC returns to 0,0 keep up the great work guys! Also I think if you were to move the rails to one side of the CNC vs directly over it might pull it easier and only give the CNC enough hose to go end to end when we got out second 4x8 CNC I did the dust collection and gave it to much hose and the CNC would catch the hose and rip it off very frustrating but you guys will figure it out I’m sure of it!
Nice job Jordan !
Thank you!
Wait to go Jordan! 🔥
Jordan’s time to shine 🤓👊🏽💪🏽💥
For dust collection we started out with hose suspended from string on a track but ended up putting in a boom arm made out of the same external diameter tube as the internal diameter of the flexible hose. That way the boom covers most of the table and you only need relatively short peices of flexible to reach the gantry.
I think for your dust collection you could do the same thing that they use in a car wash with the hand wand. Let it slide back and forth for the length of the bed. And leave enough slack for the cross cuts.
For the vacuum system maybe try a single track that then leads to and flat rod with two eye hooks with the flat rod being able to rotate independently.
im a cnc techniction for a major cnc/edgebander manufactoring and damn you guys did an awesome job :) if you guys ever go full production mode making kitchens/cabinetry and need an upgrade id love get you guys hooked up. as always great great great work!
I want more cnc’s
@@jordanheider2662 more cnc = more happy
@@jordanheider2662 If you do upgrade, go with a Beisse! Hands down best on the market. We have the Rover AS FT in our cabinet shop. The one I bought was expensive, but it paid for itself within months. You can literally load it with a lift of ply/MDF/etc. and let it run 24-7 with little downtime. Obviously, something that large isn't logical for everyone, but Beisse makes affordable options for every shop. And like any tool, buy the biggest you can afford so you're not rebuying in a few years.
Avid makes a great tool, but it's time to go from hobby level to pro level.
@@Johnniewilliams20 I work for a major competitor of Biesse while they are very good machines be careful there cncs are very good however i am constantly and i mean literally all the time replacing there edgebanders (sometimes brand new) with ours. I've heard there servicing can be spotty depending on location so I tell people to check with there service department before buying to see if they have local techs or are in the area on a semi regular basis.
@@cojofoplays1837 Thankfully for me, they're headquartered a couple hours from my shop. I don't have their edgebander. I'm running a CanTek, I've had it for a while and I like it. Maybe in the coming year I'll get to upgrade. But I've got my eyes on the CanTek double side planer before that day comes. lol
Which brand do you work for? I'm not married to one thing, if something is better, I'll check it out.
John with the Seagull Management lol. Fly in, crap on everything, fly out.
We love you John.
They make UHMW tape that would cut down on friction on top of the cable cover.
Join your two rails together with a bridging rail and then put another slider across it... just like your cnc is made.
On the side closest to the Dusty put a couple extra wheels so the hose concertinas.
Wow. That thing is amazing
Once the shop is ready are you going to continue the 1 sheet one board challenge! That’s my favorite series!
I wish I could jump to the future so I could watch the next video already
Wowers that's definitely big and beefy. Congratulations on your new tool / Toy. Can't wait to see more videos soon John and the boys. Keep up the great craftsmanship and hard work my friends. Keep making. Stay squirrely. Keep making. God bless.
”Miss Piggy XL” should be her new name😉 Good job guys!
Miss piggy looks awesome. I’m waiting to see how you guys build the doors for Miss Piggy I have a similar situation for my doors for a spray booth but my opening is 8‘6”x 8’6” . So I’m waiting patiently for content on that. Shop is looking awesome
To help make sure the piece you’re cutting stays completely flat, use 3/4 masking tape and go around the edges where the piece and the mdf touch
That was fun!
Nice setup! I can see you guys putting a sheet of ply on the back and letting the robot chew on it while setting up something in the front. Then swap to the chow line in the front, etc. So basically Miss Piggy can be eating with very little downtime.
the plan is to get her heavy AF
You guys did an awesome job!
‘’Courage taught me no matter how bad a crisis gets ... any sound investment will eventually pay off." - Carlos Slim Helu
Making it out at a young age is quite difficult. I started a side hustle at 17, saved up and made some good investments. l'm 28,live on my own and having a good life for myself. Big ups to you and everyone out there trying
@Hoshi Fuyo Yes it sure is. I put in money in investments and get profits. That 's how I make more money without working. This does not sound new to you right ?
@Ibrahim faizan There are lots of investments options such as real estate, stock market, forex, cr ypt os, passive income,
Financial freedom is absolutely the perfect freedom
@Ibrahim faizan Yes I recommend the service of Lynne Ellen Rule she is a great financial consultant and has made a great impact on my financial journey.
The only thing I don’t like about this channel is one video per week. More please !!!
John! Calling you out! What was your max bench in the pros? And what can you bench now? Video?
HAHAHAHA, I was a fast guy not a strong guy, and now im just a dad who can barely do 10 push ups hahah
Pretty impressive machine indeed! 😮
Great work, guys!!!
Stay safe there with your families! 🖖😊
The boys would be lost without a Jordan! Crazy how things have changed! 🤣
Nicely done boys. Even when you have a plan, you still end up 'figuring it out as you go'.
Surely you want a bracket that joins both runners together?
Loving the Sam and Jordan show. Who’s this John bloke who keeps showing up randomly.
He just keeps the ship running haha
Good job getting through that. Quite the task!
Amazing job Jordan and Sam.
Hard pipe to the ceiling at the mid point of the bed then use flexible pipe to the gantry. This will reduce the extra movement in the dust collection
Great job guys. Miss P is now...HARD CORE!
Who doesn't love them toys! Keep it coming boys.
Can’t wait to see yinz mill your logs, dry them and see Miss Piggy 2.0 in action!
Good job on the table guys
Oh my gosh PLEASE make a boroque chair or bed! I'm begging you
I propose to lead the vacuum pipe in the same way as the electric wires go. I was working on a CNC machine that had this solution and it worked great.
Love it. Living the dream!
Thanks for having the American Flag on display!!!!!
Wish I had a shop where space was plentiful, but for now my garage will have to work....but I am still jealous!
Btw, you should have cut in some PVC unions,, because you never no when you will need to take it apart. I hope you never drop anything in any of the dust ports.
Probably been pointed out, but Black Forrest's avid machine is 20', maybe longer.
If the dust collection hose solution was mine to figure out, I'd look into installing a "self-service car wash" boom arm contraption up top.
Just an idea from a touring musician turned woodworking hobbyist after covid decimated my industry. Love the channel, would love to meet you guys up in PA one day.
Expert level of patience shown here, lol. I was considering adding a vacuum table to my 4x4 CNC but wasn't sure if you could also have dog holes on the spoil board. Does having the open dog holes impact the vacuum pressure?
Now you can install a second gantry and really make use of the space and large table.
Best channel on TH-cam! Why don't you have over a million subs?!
Black Forest wood company has you beat on the CNC by a few feet! But still a cool video
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Perfect work brother's 👌😍
Miss Piggy? More like Miss Longy. 🤣
T-slotted aluminum is great for stuff like this.
Love the channel you guys are always entertaining and do really good work!
Damn good job, Jordan! Well done Sam! Way to be "the boss," John! LOL
9:24 anyone else see Johnny 5 Alive? just me? okay, back to my corner
I'm very curious how that SuperCell does. I was going to buy that this fall, but I found a used Gorilla Pro 5hp for the same price so I went with that.
plz put rubbers in the groves. you can get a better vacuum !!!
Hello sir I like this video
How do these guys make enough money to support all of this?
have we ever seen a non-baked jordan? :D
Where can I get a fancy sweatshirt like the one John has at the end of the video?
Years ago I worked for an employer who left to me figuring out and understanding a vital software for running their business. long story short I eventually had the owner by the short and Curlies because without me he couldn’t run his own software which ran the entire business. The moral here is the boss or owner should always without exception no more about their business than any employee at all times. Jordan will eventually have you by the short and curlies if you don’t learn the CNC. You never want any part of your business reliant on one employee. Amazing CNC though and of course an outsiders opinion and if I’m wrong I sincerely apologize
Luckily me and John are close and have similar goals for what we want to do with the business. But I guess he better be nice to me down the road
@@jordanheider2662 Lol you don’t strike me as a person who would take advantage. You all seem to do well together ,keep up the great content and try to teach John how that thing works 😃 Take Care
Hey guys love the channel been a long time viewer but let’s get you guys some wireless microphones so you don’t have to flare the volume when someone talks outside the range of your camera
It’s amazing that you guys make money lol.
Well, Jordan, you really looked like you knew what you were doing at the beginning of this video……and then. Lol
Surprised I made it as far as I did
You may have me on length but I got you on girth…😅
i only watch your stuff to see jordan use the CNC router (just kidding)
Isn't Frank Howarths bigger?
Love watching Sam and Jordon videos, awesome banter and watching them figure stuff out is great
Glad our struggles bring you joy
@@jordanheider2662 The struggle is real brother🙄🤣🤣🤣
Should call her Miss. Biggy now. :P
Is it even possible to complete any project without multiple Home Depot trips??
Don't think its the bigest cnc on youtube. They have Kimla cnc that can go to 12 m long on y axis.
My cnc has cuting capacity 3.2 meters but goes all the way to 4 meters to get the tools from the atc rack...
Nice build !
your cnc router has more square footage than my shop...
Niceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Been thinking that you should change the name of your channel, to the Sam and Jordan Figure It Out While John Disappears Channel.
Literally, I typed this in halfway through the video, and then at the end you come in and admit that you haven't done jack for a while.
My humble opinion, leaders need to be there to lead.
No, Izzy did it months ago
Izzy no longer has that .....
Protip: Don't have the linear rail and the extruded alum have joints in the SAME spot...
Why is this channel called John Maleki, when you see more of everyone else. John Malecki is like the 4th most seen person on his own channel.
Awesome! I think @canadianwoodworks has a 16’ AVID CNC and a sweet vacuum setup for it too.
ooee
If there isn't a "Pig Pen" sign made for the room it will be completely unusable.
This is a genius
First!
Shit.. episode ended.
As someone looking into a cnc purchase... it really seems like avid has a shitty product. If not for it being expandable, it would be completely below market.
Every other similarly priced, and similarly sized(base size - 4x8), is significant more rigid and a superior product.
EDIT:
Use ID tag retractable leashes for controlling a suspended dust collector hose.
Did you consider price in your evaluation compared to the market ?
good product but so boring to watch. YEAH a robot is doing an awesome job!
This video's editing is driving me nuts, why are you cutting and jumping every second? I'm only 4 minutes in but I don't know if I can finish it
Is it me or is Johns poor attitude ruining the show??
Im sorry to hear you think I have a poo attitude Chris, i'll work on that
@@John_Malecki Just seems like it lately.. Maybe you are stressed out or something, but it is definitely coming across in your videos.. Hopefully whatever is wrong, it gets better for you.
Miss piggy is thick (2 c's)
Love your videos. I would like to make a prediction. Those side rails that seem to stick out 18" or so will take out some hips as time goes on.
The CNC Cowboy is taking the lead! Go Jordan!!
Enjoyed it - Thanks, y'all!
Jordan needs a raise! 🤣😂
I like this
Needs a bigger gantry. 16x16 would be fun
Looks like you guys need a rigid swinging arm for the hose. Do solid pipe along the wall about 8 ft, then a big swingin boom arm that reaches to about the middle of the cnc. Run your hose up and over that for moral (and physical) support.
Lincoln Street Woodworks did one for his table saw. Seems like it would work well in your aituation.
Black forest did it first tho...
Good times at the squirrel cage 😂 good work y’all
Good work around on the air filter plumbing…..turned out great……😎
I really need more than one video per week guys.
We're trying Cade!
Janicki Industries laughs at your CNC boast. Try 100x20x8 5.axis.
We do the sake thing with our CNC here in Meyersdale PA. we are a custom table company and make and sell all kinds of cool stuff. Look up Clapper Tables Enterprise when ya get a chance if ya wanna.
Who cares about your possessions John? Oh! 621k subscribers and counting. (unsubscribed)
John absolutely every thumbnail looks like your impression of Hilary Clinton looking at balloons….please try something new