I'm sure you've found something by now. I bought a spool of 70/30 solder from the Ferree's instrument repair supply company. The Music Medic company also offers a soft solder.
I am repairing an 88 year old trumpet that was found at the dump. The brace that attaches the lead pipe to the bell (at the flared end) has come loose from the lead pipe side. I'm finding it difficult to clean under the brace, and I'm wondering - should I desolder the other side so that I can more carefully clean up the surfaces? The other side is a much larger flange and I don't want to risk making things worse, but I also want to make sure the solder joint is good on the side I have to reattach.
I use 60/40 for everything, but I think they recommend using 50/50 on silver plating. Either one should work. You need to be careful soldering lip plates because it is very easy to get the solder on the tube. Use a very steady hand and feed the solder from the back of the lip plate.
Man your videos are well produced and you do good work. However, one gripe. I own and operate my own repair shop. Sizeable operation. I had a parent come in this morning after having watched this video with solder gooped all over his horn, burned lacquer, etc. Mess to clean up. Some things, knowledge etc, stay "in the trade" for a good reason. Cheers
Another helpful lesson that gives us a thorough, comprehensive explanation of the basics of soldering. Thanks again.
These videos are really helping us with the quarantine at home. Thank you
Hi sir, can ask what brand the soldering wire?
I'm sure you've found something by now. I bought a spool of 70/30 solder from the Ferree's instrument repair supply company. The Music Medic company also offers a soft solder.
I am repairing an 88 year old trumpet that was found at the dump. The brace that attaches the lead pipe to the bell (at the flared end) has come loose from the lead pipe side. I'm finding it difficult to clean under the brace, and I'm wondering - should I desolder the other side so that I can more carefully clean up the surfaces? The other side is a much larger flange and I don't want to risk making things worse, but I also want to make sure the solder joint is good on the side I have to reattach.
Hi Art. What ratio of Ammonia to Water to you use to neutralize the flux?
About 4 parts water to 1 part ammonia.
@@TheBrassandWoodwindShop Thx!
Hi, what is the ratio of the neutralizing mixture of water and Ammonia, is it 50/50 or does it matter if I have more ammonia. thanks.
Use 3 or 4 parts water to 1 part ammonia.
What solder should I use when replacing a flute lip plate, 70/30, 60/40 or 50/50 TIA.
I use 60/40 for everything, but I think they recommend using 50/50 on silver plating. Either one should work. You need to be careful soldering lip plates because it is very easy to get the solder on the tube. Use a very steady hand and feed the solder from the back of the lip plate.
What is the formula for the neutralizer ? Thanks
One part ammonia to 4 parts water.
Man your videos are well produced and you do good work. However, one gripe. I own and operate my own repair shop. Sizeable operation. I had a parent come in this morning after having watched this video with solder gooped all over his horn, burned lacquer, etc. Mess to clean up. Some things, knowledge etc, stay "in the trade" for a good reason. Cheers
You got a job in your shop from this video. You should be thankful instead