Portable Bluetooth Speaker Build (Using 3D Printed Parts)

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 พ.ค. 2024
  • 👉 Build plans, wiring diagram and more: etsy.me/4b4aPd8
    ✅ Creality 3D printer - geni.us/IuLA579
    Parts (US / EU):
    ✅ Dayton Audio CX120-8 coaxial driver (x2) - parts-express.sjv.io/JzqDjv / bit.ly/3KMPsl9
    Crossover components:
    3.3uF 250V capacitor (x4) - parts-express.sjv.io/Y9dJVJ / bit.ly/4c9fRpp
    22uF 100V capacitor (x2) - parts-express.sjv.io/q4g7W5 / bit.ly/4alpsI3
    15uf 100V capacitor (x2) - parts-express.sjv.io/PyaPaY / bit.ly/4a4MDpU
    0.30mH 20 AWG coil (x2) - parts-express.sjv.io/ZQrZr1 / bit.ly/49Hkgy9
    1.0mH 18 AWG iron core inductor (x2) - parts-express.sjv.io/MmQ95K / bit.ly/490mFTz
    1 Ohm 10W resistor (x2) - parts-express.sjv.io/Or1jnN / bit.ly/48PypIe
    ✅ Bluetooth stereo amplifier - bit.ly/3qjMpJV / geni.us/4XYI
    Bluetooth stereo amplifier w/o tone control - parts-express.sjv.io/an2GVQ
    Amplifier knobs - bit.ly/45Kgz99 / parts-express.sjv.io/oq06de
    18650 battery cells (x3) - bit.ly/3J3KCNl / geni.us/LqDK
    3S BMS board - bit.ly/3P9YieV / geni.us/E30JaSC
    12.6V 1A Charger - bit.ly/3V95ifR / geni.us/Si0zNc
    3S battery level indicator - bit.ly/3wJAt7n
    18650 Insulation rings - bit.ly/3TnIhEG / geni.us/rUjb
    Pure nickel strip (0.1X8mm) - bit.ly/3Yfq24A / geni.us/eGhsS2
    Insulating paper - bit.ly/3jGjKLH / geni.us/vlrhD
    Kapton tape - bit.ly/3VOhzUj / geni.us/VOVm
    DC input jack (5.5x2.1) - bit.ly/3SFWFru / geni.us/Hbs3uD
    2-3 mm clear acrylic (200x200) - bit.ly/48EZiPb / geni.us/E3RxN
    Faux leather vinyl - bit.ly/3IKlspM / geni.us/dqaM
    M3 screws - bit.ly/43gUZaR
    Liquid tape - bit.ly/43ANz1N / geni.us/y5ph
    Rubber feet - bit.ly/3IjqU2z / geni.us/E2PU4
    Leather handle (160mm) - bit.ly/3C7CFoM
    Foam gasket tape - bit.ly/3hXlrnu / geni.us/wU15
    Audio input jack - bit.ly/3ItjQ2o / geni.us/BNMj
    Tools:
    Spot welder - bit.ly/3Uc7O4w / geni.us/5ALs1M
    TS101 soldering iron - bit.ly/3HUzrI9 / geni.us/owyDm5G
    Multimeter - bit.ly/3vS2aKG / geni.us/UmrhyYk
    Wire stripper - bit.ly/4dG6Jt2 / geni.us/6epIs
    Cordless drill - bit.ly/4bZg5PN / geni.us/A5AZi
    90 degree drill adapter - bit.ly/42j1Grq / geni.us/Wuwdh
    Drill bit set - bit.ly/3S3i6zC / geni.us/ktAK1M
    Jig saw - bit.ly/3uWmric / geni.us/D8GC
    Orbital sander - bit.ly/3HBOC8O / geni.us/gHqu0W
    Wood router - bit.ly/3I7Aplm / geni.us/6okRl
    Router circle jig - bit.ly/3P5B75e / geni.us/JvCvO
    Straight bit - bit.ly/43nXng8 / geni.us/bkAYwnC
    Flush trim bit - bit.ly/43ggzfH / geni.us/bZRVci5
    Rabbet bit - bit.ly/3IQCG4e / geni.us/Ac9C
    Round over bit (R9.52) - bit.ly/3Ivi4Oh / geni.us/0MASr
    Step drill bits - bit.ly/3Pe3fU6 / geni.us/xYRx7J
    Forstner bits - bit.ly/35snpjW / geni.us/F6it
    Hole saw set - bit.ly/3YZU8tg / geni.us/hONP
    Center punch - bit.ly/3xslc8u / geni.us/o5WBEwB
    Helping hand - bit.ly/3B9mIgt / geni.us/Yyqyte
    Thanks for watching!
    - Donny
    0:00 Intro
    0:16 Design and ports
    1:30 Building the enclosure
    5:47 Veneering
    8:16 Speaker holes
    9:45 Sanding and routing
    10:53 Panel bracing
    11:34 Applying the leather
    15:13 Panel finishing
    16:15 Installing the panels
    17:29 Speaker components
    20:32 Battery
    24:55 Rubber feet
    25:26 Leather handle
    27:12 Final assembly
    32:50 Finished speaker
    33:30 Sound test
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 390

  • @chickencurry7642
    @chickencurry7642 11 หลายเดือนก่อน +4

    That power switch/battery indicator is cool

  • @RandomAudioGuys
    @RandomAudioGuys หลายเดือนก่อน

    I just found your channel Donny, and you did an amazing job of crafting something that looks retail, I love your use of the 3d printer. You made jigs with it that helped finalized a professional look, I was worried that it would be a overuse of 3d printing when I saw the title, but you integrated the 3d printer in a way that it should be used, we all know the look of 3d printed parts is not a finish that gives a production part look. The ports were masked in the back allowing them to do their job without showing up to the eye.
    You may want to consider giving the front ports that show an acetone bath, It helps give a production look to 3d printed parts and would only need done to the piece that shows to the eye.
    But I wanted to say, you did an amazing job , and I am about to use a set of Focal Slate series speakers for a similar product and kudos for doing an awesome job in inspiring many others.

  • @Danielddiniz
    @Danielddiniz 7 หลายเดือนก่อน +6

    You’re so greatly talented, man, congratulations 🏆

  • @dammitbobby283
    @dammitbobby283 ปีที่แล้ว +39

    Your build looks amazing! It's very neat and has a professional appearance.

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน +1

      Thanks! Kindly appreciated.

    • @rangawellappili8221
      @rangawellappili8221 9 หลายเดือนก่อน

      ​@@DonnyTerekyou can come to me

  • @user-mc6pd8fs3p
    @user-mc6pd8fs3p 6 หลายเดือนก่อน

    This is mega helpful. In fact your solution has saved me for the PHYSICS project that I've had in mind with my group members, and It has helped us a lot. you DESERVE MORE subs MAN! Congrats!!!!!! 😍😍😍😍😍

  • @newvaper3794
    @newvaper3794 6 หลายเดือนก่อน +1

    wonderful project Donny...thanks for this video man...keep safe.

  • @josemariandrade
    @josemariandrade ปีที่แล้ว +8

    Perfect in every aspect, joinery, finishing and choice of audio system!
    Congratulations!

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Much appreciated, thank you!

  • @onairtamiloli4151
    @onairtamiloli4151 ปีที่แล้ว +1

    Excellent job!!👌👍

  • @Pyrjexa
    @Pyrjexa ปีที่แล้ว

    that... that looks awesome!
    good job!

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Thanks! Much appreciated.

  • @wattspeakers
    @wattspeakers ปีที่แล้ว +38

    Wow! Incredible build, so much attention to detail and the craftsmanship was meticulous. Your camera work and video editing are... Well to say incredible would be an understatement. The sound sampling was top shelf, the sound was excellent. But the part I liked the most, was the ported, powered portable speaker system that sounded impressive. Gorgeous work of art, with that embossed handle. Amazing. Really really good job all the way around.

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน +3

      Thank you so much! Can't express how much this means to me.

    • @RajRaj-ye1vj
      @RajRaj-ye1vj 7 หลายเดือนก่อน

      ​😅

    • @rastailor256
      @rastailor256 5 หลายเดือนก่อน

      ​@@RajRaj-ye1vj❤aaqààa🎉à

    • @MateenLoevolgs
      @MateenLoevolgs 2 หลายเดือนก่อน

      ⁹😮​@@DonnyTerek

  • @GudiyaDevi22-nm1qg
    @GudiyaDevi22-nm1qg 4 หลายเดือนก่อน

    Nice bass and sound quality ❤ with love.

  • @DGen.X
    @DGen.X ปีที่แล้ว +12

    Yep, your classic type of building a bluetooth speaker here in your TH-cam channel! AWESOME! The combination of that bluetooth amp and the driver are perfect! Sound quality is amazing, great build sir Donny Terek.👏👏

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Thank you so much! Kindly appreciated.

  • @williamgarrison3178
    @williamgarrison3178 ปีที่แล้ว +2

    Incredible. High art!

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Much appreciated, thank you.

  • @idrisjones1453
    @idrisjones1453 ปีที่แล้ว +12

    Great project Donny , I like the use of the 2 way coaxial drivers, it sounds good even though TH-cam so it must be great in the room, well done sir keep up the great inspirational videos.

  • @Vinodranganathan
    @Vinodranganathan 7 หลายเดือนก่อน +3

    I would gladly buy it. It:'s the best compliment that I can give for such a meticulous build.

    • @DonnyTerek
      @DonnyTerek  7 หลายเดือนก่อน +1

      Kindly appreciated.

  • @mbokochanel
    @mbokochanel ปีที่แล้ว +1

    Wow, the speakers are really good

  • @madkvideo
    @madkvideo 6 หลายเดือนก่อน

    Super clean build!

  • @AdityasMedia
    @AdityasMedia ปีที่แล้ว +8

    Excellent!!! Professional. Box is absolutely gorgeous.
    Looks great and sounds even better. I love it. Wish I could have it. 👏👏👏👏

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Thank you so much! Kindly appreciated.

  • @TheChrisplayer94
    @TheChrisplayer94 ปีที่แล้ว +5

    wow just wow
    This looks better than any industrially manufactured Speaker!
    Hope it sounds as good as it looks!
    maybe a little dsp next time?
    cheers

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน +1

      Thank you! Had an idea of using dsp for a speaker build, might do it on my next build!

  • @Lollipops_Lover
    @Lollipops_Lover 11 หลายเดือนก่อน +1

    Ооооо-х-хо-хо. Как-же я люблю смотреть такие видео ролики. Просто бомба, супер, жду ещё такого контента.

  • @jose_eliomar_diniz
    @jose_eliomar_diniz ปีที่แล้ว +1

    Awesome! Congrat's! 🔊👊🏻

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน +1

      Thanks!

  • @ford1546
    @ford1546 8 หลายเดือนก่อน +2

    apart from the complaints I wrote in my comments, this is an incredibly well built speaker!

  • @AlexandreSantanaRBG
    @AlexandreSantanaRBG 11 หลายเดือนก่อน +1

    Great job. Congrats!

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน +1

      Much appreciated, thanks!

  • @user-rj4ly9qu6j
    @user-rj4ly9qu6j 8 หลายเดือนก่อน +10

    Very nice finishing

  • @natomale
    @natomale 8 หลายเดือนก่อน +3

    Hi Donny, how did you calculate your needed power? Your battery pack is 3* 3.7v 3.4ah - Your amplifier can receive 12-24v and can give 2*100w - Your speakers can receive 40w

    • @DonnyTerek
      @DonnyTerek  8 หลายเดือนก่อน

      Hi! The actual power output on the amplifier is more like 2*25W if not less. The battery pack is roughly 35 Wh of capacity so it is suitable for the power needs of this amplifier.

  • @ragnarlotbrok2361
    @ragnarlotbrok2361 ปีที่แล้ว +1

    Beautiful!!! Sound nice!

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Much appreciated, thank you!

  • @paulb4uk
    @paulb4uk ปีที่แล้ว +1

    Sounds superb

  • @Athleteraptor
    @Athleteraptor 8 หลายเดือนก่อน +4

    Watching at 4k is like heaven ♥️

  • @kronos92tg
    @kronos92tg 6 หลายเดือนก่อน

    Amazing, nice work

  • @jernejfunkl8300
    @jernejfunkl8300 ปีที่แล้ว +2

    Very professional construction :)

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Thank you!

  • @madebyparisgr
    @madebyparisgr ปีที่แล้ว +1

    Nice work my friend!

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน +1

      Much appreciated, thanks!

  • @thedivyanshupandya
    @thedivyanshupandya 11 วันที่ผ่านมา +1

    I Know Your Struggle In Making Of This Speaker And Your Hard Work, I Know That Your Machine Are Very Costly But Sir Please Can You Give Me This Beautiful Product♥️♥️♥️♥️

  • @ammy4551
    @ammy4551 11 หลายเดือนก่อน +4

    It looks very simple but there is lots of work behind this

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      All the hard work is on the inside 😄

  • @clintonsienes507
    @clintonsienes507 9 หลายเดือนก่อน

    That speaker shouts premiumness

  • @chongshenchang9367
    @chongshenchang9367 ปีที่แล้ว +2

    Great job... The precision and detail finishing was awesome. Very clean and tidy.
    Please build another BT speaker with wireless mic for karaoke singing with higher amps for longer backup.
    Wish I possess those tools/machines.

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Thank you kindly! Will have that build in mind for the future.

  • @feflofeflic
    @feflofeflic ปีที่แล้ว +2

    ... 1st home made bt speaker which was made "by the head/brain" (something was calculated, precision work, etc.) I've ever seen...indeed for the first time it was a pleasure to watch a video of this type (honestly)...thank you...

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน +1

      Thank you so much! Truly means a lot to me. Indeed it was quite some work to design a speaker like this.

    • @feflofeflic
      @feflofeflic 11 หลายเดือนก่อน

      @@DonnyTerek... u r welcome - good work deserves good words...

  • @basukisugito8929
    @basukisugito8929 19 วันที่ผ่านมา +2

    Why do all make bluetooth speakers in mono?

  • @coronkcyber3731
    @coronkcyber3731 7 หลายเดือนก่อน

    I love your work. Full of taste

    • @DonnyTerek
      @DonnyTerek  7 หลายเดือนก่อน

      Thank you!

  • @thovarisk8699
    @thovarisk8699 ปีที่แล้ว +1

    so clean!

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Thanks!

  • @HVACSAN
    @HVACSAN 2 หลายเดือนก่อน

    Nice bass and sound quality!

  • @madlad_don2387
    @madlad_don2387 10 หลายเดือนก่อน +1

    10:22 that one bee when you walk out the door and it declairs war.

  • @4lecsg
    @4lecsg 8 หลายเดือนก่อน +1

    I like these videos where they show you how to build stuff using common household tools.

  • @cyrilsalillas4383
    @cyrilsalillas4383 8 หลายเดือนก่อน +1

    Very nice piece of work and well planned what a beauty and sounds great 👍 the crossover is that only for cx120 coax or it work to other woofer and tweeter.

    • @DonnyTerek
      @DonnyTerek  8 หลายเดือนก่อน

      Thank you, kindly appreciated. This crossover is designed for the CX120, it might work with other woofer and tweeter.

    • @cyrilsalillas4383
      @cyrilsalillas4383 8 หลายเดือนก่อน

      Hi, Donny i inspire by you so i want to make a bluetooth speaker. I think i need your help so my design is 2 full range driver and i want to add a subwoofer. I ordered my bluetooth amps and subwoofer mono amps module my question is how to connect the subwoofer module audio input to bluetooth amps . Thanks

    • @DonnyTerek
      @DonnyTerek  8 หลายเดือนก่อน

      @@cyrilsalillas4383 Hi, I would recommend this amplifier for your build, connection is very straightforward: tinyurl.com/2spn6r5j

    • @cyrilsalillas4383
      @cyrilsalillas4383 8 หลายเดือนก่อน

      @@DonnyTerek Thanks Donny for your help highly appreciated.

  • @feliperodrsan
    @feliperodrsan ปีที่แล้ว +1

    Perfect!

  • @PuneethNandyala
    @PuneethNandyala 9 หลายเดือนก่อน +1

    Great efforts bro... Good things takes time

    • @DonnyTerek
      @DonnyTerek  9 หลายเดือนก่อน

      Very well said, thank you.

  • @louiegeesiclot3505
    @louiegeesiclot3505 11 หลายเดือนก่อน +1

    The speaker is so simple I like it❤

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Thanks!

  • @CodyHovland
    @CodyHovland 11 หลายเดือนก่อน +1

    That's awesome, I love the attention to detail! How loud is it? Did you test the decibels?
    It seems that the "22uF 100V Electrolytic Non-Polarized Crossover Capacitor" and " Dayton Audio CX120-8 coaxial driver" are sold out. Do you have any recommendations for replacements?

    • @DonnyTerek
      @DonnyTerek  9 หลายเดือนก่อน

      Thank you!
      Sorry for the late reply, but it seems both are back in stock now.

  • @Z_YasTreb_V
    @Z_YasTreb_V 4 หลายเดือนก่อน +1

    Просто нет слов шикарное изделия молодец.

  • @bhawnajarwal
    @bhawnajarwal ปีที่แล้ว +1

    made a solid sistem no compromise to quality too good work exilent

  • @ricardoandres1427
    @ricardoandres1427 ปีที่แล้ว +2

    Hola. Consulta: dónde compras el kit de altavoces?
    Por lo que he visto en tus videos, me quiero animar a fabricar uno.
    También soy amante de los parlantes y los colecciono.
    Excelente trabajo y muy prolijo.
    Te sigo desde ahora en TH-cam.
    Saludos desde Chile.

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Hi! Had to translate your text. You can check the description for links to the parts.

  • @josephesposito3499
    @josephesposito3499 7 หลายเดือนก่อน

    Where can I buy the drivers? I need 3.5"

  • @MuhammedMiziri
    @MuhammedMiziri ปีที่แล้ว

    Good job bro

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Thanks !

  • @Nicolas91470
    @Nicolas91470 9 หลายเดือนก่อน

    Super job :) Whay are you using crossover in this case ? To my comprehension, crossover is only use when we want to split the signal to a woofer and a tweeter. Right ?

    • @pixelreflectorpro
      @pixelreflectorpro 9 หลายเดือนก่อน

      The woofer has a built in tweeter

    • @DonnyTerek
      @DonnyTerek  9 หลายเดือนก่อน

      Thanks! Exactly, this speaker does have a tweeter inside the woofer.

  • @clickvisual4864
    @clickvisual4864 ปีที่แล้ว

    hi im happy with your video...and im excited when you upload boombox again

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Thank you!

  • @TCTalhaOzturk
    @TCTalhaOzturk 11 หลายเดือนก่อน

    congratulations on a successful job

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Thank you!

  • @blindinglight332
    @blindinglight332 11 หลายเดือนก่อน +12

    Beautiful work! I love the minimalist and clean look :) I just want to ask where did you get the thin sheets of wood from?

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน +1

      Thank you! If you are referring to the wood veneer, I got it from my local wood supplier.

  • @DIYAcoustic
    @DIYAcoustic ปีที่แล้ว

    Good job👍

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Thank you!

  • @mukeshpatorkar6645
    @mukeshpatorkar6645 5 หลายเดือนก่อน

    Bhai aap ka wayring karna and samjhana bahot badiya hai samnewala aasani se shikh Sakta hai.dhannyawad.

  • @and_rew9768
    @and_rew9768 11 หลายเดือนก่อน +1

    Fantastic project 🔝

    • @DonnyTerek
      @DonnyTerek  9 หลายเดือนก่อน

      Thanks!

  • @thedivyanshupandya
    @thedivyanshupandya 11 วันที่ผ่านมา +1

    Hello Sir, I Am From India🇮🇳 And I Loved Your Videos So Much. In My Childhood I Have Intrest On Speakers And Woofers, I am Your Very Old Subscriber, Can You Sell Me This Speaker

  • @unitedcolors2920
    @unitedcolors2920 ปีที่แล้ว

    Magic in your hand👏👏👏👏👏👍👍👌👌

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน +1

      Thanks!

    • @unitedcolors2920
      @unitedcolors2920 11 หลายเดือนก่อน

      @@DonnyTerek 🙏

  • @siddheshdangade3332
    @siddheshdangade3332 7 หลายเดือนก่อน

    please make video on 2 way jbl 424fhi 4inch speaker, with bass radiator, im confused if i can add passive radiator to it or not because it does not have dustcap

  • @deymonster2u
    @deymonster2u 2 หลายเดือนก่อน

    Does it need to additionally adjust schema?

  • @onlycarsx
    @onlycarsx 8 หลายเดือนก่อน

    Hey sir if they are both fulll range drivers what was the use of thr crossover

    • @DonnyTerek
      @DonnyTerek  8 หลายเดือนก่อน

      Hi, they are not full range, they have tweeters in the middle.

  • @shankarlaltak3416
    @shankarlaltak3416 7 หลายเดือนก่อน

    Perfect n Very very class making process...

  • @jzbreezio
    @jzbreezio ปีที่แล้ว +1

    Magnificent

  • @ZhekaStiffler
    @ZhekaStiffler 5 หลายเดือนก่อน

    Very good job!

    • @DonnyTerek
      @DonnyTerek  3 หลายเดือนก่อน

      Thanks!

  • @shabbirahmed4733
    @shabbirahmed4733 ปีที่แล้ว +1

    Awesome 👍

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Thanks!

  • @Bianchi77
    @Bianchi77 10 หลายเดือนก่อน +1

    Nice video shot, thanks for sharing, keep it up :)

    • @DonnyTerek
      @DonnyTerek  9 หลายเดือนก่อน

      Thanks for watching!

  • @Schjoenz
    @Schjoenz 6 หลายเดือนก่อน

    I really wanted to know how to get those numbers like internal volume, port size and whatever that is. All I know is how to connect the amplifier, power supply, speaker and everything about electronics. But the box sizes, air volume, and all the physics of sound wave is something I have zero knowledge. Where can I find tutorials for these and what terminologies should I use?

  • @RathinBaine
    @RathinBaine 8 หลายเดือนก่อน +1

    Can you make another one like this for me?

  • @user-js4rc4fo1g
    @user-js4rc4fo1g 11 หลายเดือนก่อน +4

    Шикарная вещь.Отлично сделано.Браво.

    • @Svarenn1y
      @Svarenn1y 7 หลายเดือนก่อน +1

      Реально, сделал круто. Особенно понравился тот факт, что он рассчитал фазоинвертор, фильтр для АС, ну и в целом собрал качественно. Когда попадаются видосы с индусами, которые собирают хрен пойми что, оно играет не понятно, что то пердит и их устраивает, в комментах под такими видосами люди восхищаются пердежу.
      ( пердит далеко не микрофон, прям слышно что оно просто орет бестолку)

  • @MobilediscowirralCoUk
    @MobilediscowirralCoUk ปีที่แล้ว

    Dayton Audio make some good drivers

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      They sure do!

  • @latasingbey873
    @latasingbey873 4 หลายเดือนก่อน

    Best finishing.

  • @orheianul
    @orheianul 11 หลายเดือนก่อน +2

    Great Job! The details are amazing.

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน +1

      Thanks!

  • @lucianogiraldi7048
    @lucianogiraldi7048 3 หลายเดือนก่อน

    Great Job!!!
    Which spray glue have you used for leather?

    • @DonnyTerek
      @DonnyTerek  3 หลายเดือนก่อน

      Thank you! I use spray contact adhesive that you can get at most hardware stores.

  • @arturolorca583
    @arturolorca583 7 หลายเดือนก่อน +1

    Hola, podrias facilitarnos el STL del port??

    • @DonnyTerek
      @DonnyTerek  7 หลายเดือนก่อน +1

      Hi, please check the link in the description.

  • @DubDado
    @DubDado ปีที่แล้ว

    so fine! ;-)

  • @user-lh3uj6sb3y
    @user-lh3uj6sb3y 4 หลายเดือนก่อน +2

    По сравнению с другими,эта колонка сделана качественно,жму руку мастеру,попробовать сделать что-то подобное но уже с флешкой и радио,я думаю получилось бы тоже супер,звучание динамиков бомба

    • @volodik33
      @volodik33 4 หลายเดือนก่อน

      Три элемента 18650 на усилок c TPA3116 для раскачки 8-ми омных 40-ваток, это не серьёзно). В остальном отличная системка!

  • @KunKoong
    @KunKoong ปีที่แล้ว +1

    beautiful

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Thank you!

  • @adityaSharma-ur7fd
    @adityaSharma-ur7fd ปีที่แล้ว

    Details 💯💯💯

  • @ErMakesEverything6734
    @ErMakesEverything6734 ปีที่แล้ว +1

    Amazing🥰🥰

  • @tyriedle2658
    @tyriedle2658 8 หลายเดือนก่อน

    You rock guy

  • @russgladstone432
    @russgladstone432 7 หลายเดือนก่อน +1

    Very nice, I bet it sounds better placed against a wall, or even better in a corner, smart clean look too, great job

  • @diyarbas-qx6gm
    @diyarbas-qx6gm 3 หลายเดือนก่อน

    congratulations, very nice job Danny i from Turkey

    • @DonnyTerek
      @DonnyTerek  3 หลายเดือนก่อน

      Thank you!

  • @medelhousseini
    @medelhousseini 11 หลายเดือนก่อน

    the sound apear clear, good Job

    • @DonnyTerek
      @DonnyTerek  9 หลายเดือนก่อน

      Much appreciated, thank you.

  • @GILSON300LBM
    @GILSON300LBM 7 หลายเดือนก่อน +3

    Muito top 👏👏👏 quantos dólares custam os alto falantes e onde comprar? Parabéns pelo capricho no seu trabalho

    • @yahantosabhighadjalehe8279
      @yahantosabhighadjalehe8279 6 หลายเดือนก่อน

      😊

    • @Z_YasTreb_V
      @Z_YasTreb_V 4 หลายเดือนก่อน +1

      Такие вещи ручной работы стоят ооочень дорого

  • @niponphanfak6090
    @niponphanfak6090 11 หลายเดือนก่อน

    สุดยอดอยู่ครับ ถูกใจเครื่องมือที่ครบครันครับ ทำให้งานออกมาเนียนครับ😊

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Thank you!

  • @ivanalfonsocorderogutierre7498
    @ivanalfonsocorderogutierre7498 หลายเดือนก่อน

    Beautiful!❤🎉

  • @sidd7775
    @sidd7775 4 หลายเดือนก่อน

    Great job 🥰🙏🙏

    • @DonnyTerek
      @DonnyTerek  3 หลายเดือนก่อน

      Thanks!

  • @user-sr5qk5sf5g
    @user-sr5qk5sf5g 8 หลายเดือนก่อน +1

    What are the dimensions of your speakers, both length and height?

    • @DonnyTerek
      @DonnyTerek  7 หลายเดือนก่อน

      You can find the build plans in the description.

  • @denisbritorodrigues
    @denisbritorodrigues ปีที่แล้ว +2

    Mto top parabéns!

    • @ford1546
      @ford1546 8 หลายเดือนก่อน

      with 11v batteries, you will not get that many watts out of the amplifier!
      and with so few batteries, batteries don't last long.
      I think the JBL extreme 2 has a 10 Ah battery compared to the 3 Ah that you have

  • @RahulGaming-eg6qk
    @RahulGaming-eg6qk 7 หลายเดือนก่อน

    GOOD JOB👌👍👍👍👍

  • @tushardevera9905
    @tushardevera9905 2 หลายเดือนก่อน

    Wow fully premium,🙂👌👍

  • @josephesposito3499
    @josephesposito3499 7 หลายเดือนก่อน

    Can I please ask WHERE can I buy these little speakers? And specifically 3.5"?

    • @DonnyTerek
      @DonnyTerek  7 หลายเดือนก่อน

      Please check the links in the description.

    • @josephesposito3499
      @josephesposito3499 7 หลายเดือนก่อน

      @@DonnyTerek Thanks., also do you think a full range small speaker would work with a 1 Watt mini practice guitar amp? THANKS

    • @DonnyTerek
      @DonnyTerek  7 หลายเดือนก่อน

      @@josephesposito3499 Hi, that would be a fairly low power amplifier for these speakers.

    • @josephesposito3499
      @josephesposito3499 7 หลายเดือนก่อน

      @@DonnyTerek Thanks I tried them and it's a no go.; Terrible thin sound.

  • @valdemirfroisdelima4806
    @valdemirfroisdelima4806 ปีที่แล้ว +6

    Parabéns execelente trabalho.

  • @asgameryt8049
    @asgameryt8049 6 หลายเดือนก่อน

    gret man very nice bro

  • @abdulwahid8579
    @abdulwahid8579 10 หลายเดือนก่อน +2

    Good job 👍

  • @subhashyadav-qv8dw
    @subhashyadav-qv8dw 8 หลายเดือนก่อน

    I like it how can I buy it from you

  • @puresoulg
    @puresoulg ปีที่แล้ว

    Where can I purchase the Speakers amp and elcteoncs ?
    Approximately how much do they run??

    • @DonnyTerek
      @DonnyTerek  11 หลายเดือนก่อน

      Hi, sorry for the late reply. I have just finished writing down every component in the description. The battery life is quite good, around 8 hours on mid volume.