❗️8C Transponder chip Programming. Ford Ranger pickup/ Mazda 2500 ❎️ Manual procedure. AKL ☝️

#how #locksmith #diy
This video is for informational purposes only! We do not assume any responsibility for material damage or damage to personal property as a result of the information contained in this clip. Use this information at your own risk. More VIDEO TUTORIALS
ALL BRAND NAMES, TRADEMARKS AND REGISTERED TRADEMARKS APPEARING ON THIS CHANNEL ARE THE PROPERTY OF THEIR LEGAL OWNERS AND ARE USED FOR DESCRIPTION / ILLUSTRATION / IDENTIFICATION ONLY

[@jesusblanco7514]

Good video many years since i dont do that car good to refresh my memory and
Is always good to have a 8c mazda key save for emergency

[@rajatpuri7185]

Thank you brother

[@doctorlock]

I use SmartPro to read Transponder ID's via OBD, Then Tango to write ID to 8C TK5561A chip & then Clone to super chip. I find it hard to do this job by immo light flashing on & off I get distracted. These cars are getting old now & I will do a video for other people to see how I do these.

[@edgardavidcespedescamargo6115]

Is there any other tool can read the transponder ID ? Autel , Xhorse ?

[@montysaudagar3372]

Thanku bhaiya 🎉🎉🎉🎉🎉🎉🎉❤❤❤❤❤❤

[@majorkeys6049]

Hi for all keys lost or add key thanks

[@giovannilagosabol4534]

how to make the immo lights flash?

[@jasonwong723]

Hi after the immo light was not blinking for the last step, so the new key with 8c chip just plug in ignition then will be done ?

[@sebastianthelocksmithandre1600]

Yes

[@ianparsons1257]

Please show us & comment when doing it the procedure required before this part in the video clip.

[@sebastianthelocksmithandre1600]

Will do next time

[@teoguancheun6601]

Hi mate, what the step for key light keep blinking ?

[@sebastianthelocksmithandre1600]

Ignition on and off 6 times or 5 times or key in and out.... always tricky

[@aronomoamey9820]

EEPROM from ecu? Can make key from Tango? Bypass pin? Thank you

[@sebastianthelocksmithandre1600]

No. Eeprom to obtain the pin. Than this procedure

[@aronomoamey9820]

@@sebastianthelocksmithandre1600 I see, so basically Eeprom will give me pin ( And Eeprom location module is in ecu,
Thank you very much :)

[@manindersingh3874]

EEPROM location plz my friend

[@briankotze57]

Where do you get the pin

[@angkeyobd4395]

Thanks for video , how do we find the pin .

[@sebastianthelocksmithandre1600]

Just buy them or order or eeprom

[@rajausama1656]

These 8c original chips are almost impossible to find where did u buy it

[@sebastianthelocksmithandre1600]

Yes hard to find unfortunately

[@ianparsons1257]

I have these in stock

[@gudiyasakom720]

I want this chip

[@hernan.wang1]

pincode obtained by autel im508??

[@soptea]

For a succesfull job always use mantras Tadaa and Yohoo 😁

[@sebastianthelocksmithandre1600]

:))))

[@locksmithsandcarprofession2428]

How do u get pin

[@sebastianthelocksmithandre1600]

Usually from the main dealer

[@locksmithsandcarprofession2428]

@@sebastianthelocksmithandre1600 it's very different to get from dealer in South Africa

[@sebastianthelocksmithandre1600]

@@locksmithsandcarprofession2428 maybe eeprom the ECU and extract the pin?

[@motosystemltd]

Most funny is flapping the doors and keys out /in at old Toyotas, rav4 etc:) what year is this vehicle? 8c I thing is in xhorse or handy baby to generate..

[@aronomoamey9820]

8c don't work with xhorse

[@motosystemltd]

@@aronomoamey9820 Hello, I just check it with handy baby 2 and key tool max, I see them there, maybe it's some latest updates? It's sounds weird becourse I have done mazdas and ford's in past and didn't have issues.

[@motosystemltd]

@@aronomoamey9820 th-cam.com/users/shortsgVbx_gNDikI?feature=share

[@aronomoamey9820]

@@motosystemltd Hi- Yeah, xhorse has 8c, but it never worked with me, same goes for megamos 13 does not work but all other chips are fine

[@aronomoamey9820]

Megmos 13 on xhorse is ID13, does not work, ID8C don't work for Ford. ID49 128 Bit newer Ford don't work, they releasing a XT27B chip for that as well as Honda ID47 G Chip don't work, those are a few that don't work, the rest of chips to generate are good