Tip for adding color. When I did my jeep I went to the pet store and got one of there large syringes. I could then measure exactly 50ml and squirt in directly into the raptor liner without any mess at all. I also died them all at once so I didnt have to worry about mixing them up. Color came out way lighter than I thought it would, but it actually looks better a lighter blue.
@@5150MotorSports 1st time using the coating. Watched allot of vedios. Took many days to get the bad Chevy paint off the truck. Took more time in prep then putting down the raptor coat. Few over spray spots to clean up. Great finish. Glad to have become a raptor liner person.
Looks great I have thought about doing my entire Fj cruiser. I will be doing my steel winch bumper this summer getting tires of repainting it every couple of years. Did my sons FJ cruiser roof in white this summer came out great. Great product easy to use. You need at minimum a 6 gallon compressor. Does not help with sound deadening I have a buddy that did his entire Fj Cruiser.
I seen this style of keep at an off-road jamboree years ago and it's been on my build list ever since. Awesome job. 80lbs psi looked great even on cam.
Awesome video. If you look VERY closely near the neck, just above the hardener fill line, there is a light ridge indicating the tint fill line. No need to double poor.
How many liters did this take you? And how many coats were you satisfied with? Maybe you said in the video but I didn’t catch it. Also what kind of paint did you mix in to get your color? Great job btw.
It’s supposed to sprayed at 50 psi the first 2 coats then 2 70 psi coats and when doing tintable raptorliner it takes 3.25 oz per bottle not 2 oz it’s going to die back some. I spray raptorliner for a living have a shop in Florida but it came out pretty good needs one more 70 psi coat to make the texture on the passenger side match and be even and consistent
When we used 45 psi we didn't like the texture it was way to course for are liking. Using 80 psi and the adjustable spray gun nozzle turned out 2 turns gave us the result we wanted. Our Raptor dealer suggested 2 oz of color base coat without binder to matched are factory color per bottle. It came out fairly close but a little light maybe 3.25 oz would have been better.
Seth Oliver. I've been thinking about spraying raptor for a living I'm in texas and no one does it around me there's some line-x and toff shops but there in my opinion a little pricey. I know they offer life time warranty but how do you handle offering spraying raptor instead of them going to one of those higher end shops?
Keven Avila I started as a mobile bedliner guy and built my name and did that for 5 years then got my shop and I have a few contacts with a few companies and I do well at what I do and I do body work. But I don’t no how it works over there
I actually thought first coat was at 90% coverage? Yours does look pretty darn good - I really love that color, looks a bit Candy Apple and metallic? Nice job. I think it is a pretty forgiving product! Thanks for sharing, cheers.
Thank You! The first coat was much less, as we didn't want to have and type of runs and this gives the the second coat something to adhere to. The Colorado Red look amazing in the sunlight it does have that Candy Apple and metallic look. Your correct, Raptor liner is very forgiving and easy to spray.
Question: Could you not mix up one larger batch to just refill in between? Unless I missed that, seems like I would have the potential of getting two different shades. About to do this to my truck and wondering.
Is this the first time you do this? If so good job 👏 I’m going to do my Dodge Ram 2500 and watching as many videos as I can. Any regrets or recommendations? Thanks 🙏
Use a black magic marker to circle all areas and dimples before applying bondo. Quick ID and faster application. 👍 Ps. Do the small and easy stuff first then larger and more difficult ones.
Thanks for watching and the support. We used their Raptor Professional spray-gun and they recommends a air compressor that can supply 40-60 psi @ 5-6 cfm…
When you spray each label do you outline at the door jamb then fill them move to the next one? Theres no build up where you start and stop? Just keep a wet edge yes and 50% overlap?
Love the jeep and color. I just Raptor lined the interior of my 98 TJ. Had trouble finding tint. Curious as to the type of paint you used...just water based valspar?
nice raptor liner job but you shouldn't stir body filler it's not good for it works better if you keep spreading it over and over till you get a contestant color and try and use a piece of metal or parchment paper to mix on just a tip still like the video
Yes....I've always been told to "fold" the hardener into the filler....not stir because it can lock in air bubbles and cause cracks later. Then again, I'm sure I've added air in before.....probably a scare tactic to make for good practice so it can't hurt to just keep doing it the way I'm taught! lol.
SUPER GREAT VIDEO... How good a painter does a guy need to do this, can a NEW BEE with a lot of rattle can experience do this? I have a good compressor....
It still surprises me how many raptorliner videos I see with people spraying without proper PPE. The hardener in raptor line has isocyanate, highly toxic and either you use a charcoal filter mask and change the filter every couple of hours or a supplied air respirator is needed.
Thanks for the video, it turned out great. My XJ's paint is pretty faded and developing a ton of paint chips, so it's time to repaint it. I was gonna go a cheap paint job from Maaco, but this is much more affordable, and I'll end up getting results I'll be happy with.
Raptor Liner is a great option and great for DIY easy prep. Looks great. Thanks for watching. Next month we’re going to be doing a CJ7 in Hugger Orange.
Looks great guys! My only concern is that the rough surface won't allow any gaskets for the mirrors, door handles, locks and any other surface contact gasket to seal properly allowing water to seep past them. Did you smooth out those surfaces or used some kind of filler to make a smooth surface for the gaskets?
Thanks, the Raptor Liner it not super rough, and I don’t see any issues of water sipping. We have pressure wash the Jeep several time and no sippage anywhere. It your concerned you could alway use some type of waterproof caulking under and inside the door handles and Mirrors..👍
Painters always start at the highest point work there way down don’t drag the hose on what you painted peel the tape as soon as you spray it it’s dry looks good in red
Not necessarily, some painter prefer starting at the bottom working up, you just needd to be aware of your air supply. Also your tack coat starting from the bottom helps the paint from running. The hose getting in the way is always a concern even from starting from the top, once you have one coat you need to be aware of you hose..
Hi Richard, we usd Rock Armor rear corner armor. See link below… Thanks for watching…. affordableoffroad.com/shop/rock-hard-series-rear-body-armor-with-rub-rail-jeep-cherokee-xj-84-01/
Hi hey got my bronco 2 painted but need to touch up can you just shoot over the dried raptor or what cant find anything on the recoat, thanks in advance frank
where do you get the paint from? i need to get some painted match to my xj and i’m not sure where to get it from and what type of paint i need. mines not a factory color btw
Hi Dominic, Thanks for watching… Visit your local automotive paint (PBE) supply store, and they can help you color match. RAPTOR is compatible with any solvent based color, including 2K acrylic solid color and mixed acrylic basecoats, and can be added up to 10% by volume (ask your paint supplier to leave out the binders if possible for best pigment density). NOTE: Acrylic basecoat toners tend to have high color strength so use sparingly (less than 10% tint by volume). RAPTOR cannot be used with water based, polyester, or enamel paints.
what color do you use? Doesn't the color come ready? If I want the dark gray color, will it come from the factory? The compressor used is of how many horses and the air reserve tank is required of how many liters? And finally, how many PSI should be worked to paint with the gun sent by the raptor company?
Parachoques y Mecánica Farmor it’s a stock Jeep color called Colorado Red. I Used the tintabe Raptor meaning you mix it with what color you want, I believe they do offer, black, white and grey. I used 7 Liters of raptor liner and sprayed between 60 and 70 psi.
How many cans of paint did you use? Cost? Have a 96 Cherokee and need to spray the area where the plastic was and my Bush wacker flairs. Wouldn't mind doing the whole thing. Same red as yours. Great video liked and subbed
Hi Keith, Thanks for the subb... We brought two kits, each kit has 4 bottles. We used a total of 7 bottles, which leaves us one for any touch up that maybe needed in the future. Bought the kit from my local automotive paint supplier and paid around $150.00 per kit. You can find the kits cheaper on Amazon. I have provide a link below. If you have any other question just let me know. www.amazon.com/Raptor-Tintable-Urethane-Custom-Regulator/dp/B074KPF5X9/ref=sr_1_1_sspa?crid=3DDPFKJC83X6U&keywords=tintable+raptor+liner+kit&qid=1571503588&sprefix=Tintable+Raptor+liner%2Caps%2C185&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyS0JFVkdMODlTQ1I4JmVuY3J5cHRlZElkPUEwOTY2NjI3MUo3Nk5FRzgyVExHViZlbmNyeXB0ZWRBZElkPUEwMTIzMDY0MUFQWTU4RktFT1I5TSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
I was thinking about doing this to my YJ but I was confused as to how to add my own colors because their website has pre-set colors. Can you specify the kit you used from them?
Thanks for watching, you need to get the tintable kit and add the color you want. It’s fairly easy just take your time. www.amazon.com/Raptor-Tintable-Urethane-Spray-Liters/dp/B01CKE7M7M/ref=mp_s_a_1_1_sspa?dchild=1&keywords=raptor+liner&qid=1588574615&sprefix=rapto&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFWN0pDWVFCVVczRjImZW5jcnlwdGVkSWQ9QTA2MTgzMjZFMTFZSVNKRElKMlomZW5jcnlwdGVkQWRJZD1BMDE1OTIwMTJESjlOU0ZOVzlMSlEmd2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
How often should you clean the gun , seems people have a lot of problems with this and whats the right thinner to use , I`ve seen conflicting reports on what thinner to use , and as before Thank you in advance.! Frank
@@TBUCKETMAN I didnt , I shot 5 bottles with no problems , the caveat ,I bought the raptor gun which I think gives a better pattern I shot the smallest stipple or setting 2 turns out . wish I could post a pic came out better than i thought it would Frank
@@frankmancuso4065 frank thank you for the fast response, I got the same gun, just trying to get the most info I can before I jump in it, I hate to say it like this but it’s easier to learn from other peoples mistakes:) I think yours came out awesome.
@@TBUCKETMAN I`m like you I asked 5150 MS and got my information from them but I did learn a thing about recoating or touch up if you will , after its done drying and you want to recoat , you have to use those scotch brite pads the red ones rerough the surface lightly and reshoot , also I used my compressor and got that light dust off before hand , 1 last thing they have the red jeep , I have a 1987 bronco 2 I shot it with Mesa grey raptor and black raptor on my mirrors , bumpers and grill . I bought James Duff bumpers . Have a nice day Sir frank
@@5150MotorSports I just scored a 2001 XJ. I'm gonna go with forrest green bed liner and looking at motivation videos. Grew up in Big Bear. Graduated HESPERIA HIGH. I know them there foothills VERY WELL.
Hey guys beautiful job, ii'm from Italy my nane is Mike, i have i questione forma you, my track is a Mitsubishi l 200 pick-up i wanted to knowhow manyliters do needto paint my pick up? Thanks forma che advice andò Hood job
Iñigo Zapata Thanks for watching, it did come out great, our fiat pass was a sucky for a tack coat. We’re getting ready to do another Jeep CJ towards the end of summer.
4 ปีที่แล้ว +2
@@5150MotorSports I'm going to Raptor my XJ before the end of the month, so all these videos are very helpful. Thanks!
@@chrischapman7657 We had to replace the passenger fender, trim both front fenders for more clearance for the 35" tires. Hood was fairly wavy which took most of the time. I say around 20 smaller dents and door dings, nothing major. One of the benefits to Raptor Liner it hides lots of the smaller imperfection that world show up in high gloss paint. Thanks for subscribing it's very appreciated. :)
What is good budget compressor for Raptor Liner? What parts do you need as in water separator and so forth? Thanks so much! I've also been studying another liner product that is made to rolled on and is self leveling. It's made by Durabak. Looks very promising as there is less product wasted and less prep needed. I would love for you to do a comparison video before I purchased either. I know that seems greedy, but I'm disabled (just becoming as I'm on my 3rd surgery in 2.5 years....my spine's discs a falling apart) and will only get one shot at this both physically and financially. I would even contact them in your behalf to see if they would give you a sample. I just do not have the means to restore my 2003 Ranger Edge Tremor Edition with paint and conventional compressor methods. A liner job, especially one that can be rolled on, seems like the best for me. I love the Jeep Cherokee you did here! Just a beautiful job. I could see the actual automotive companies offering this as an option soon as the Durabak liner is used on Naval ships. Here's the link. Enjoy if you're a geek like me! Thanks again for all your hard work. Not only is this a tough job but only tougher since you're filming and editing it both! www.durabakcompany.com/?_vsrefdom=adwords&msclkid=d4cc8b23909e142149dcd69a075c31d3&**LP%20Branded&Durabak
Hi Justin, Sorry to hear about your back. Thanks for the sharing the Durabak link, look like a standup product. :) Not sure of the Raptor Liner compressor requirement, I do have a good size compressor which was never an issue for us plus we do have water trap integrated into the air supply line. . You bring up some good points and might be a better option for you to rolling on vs spraying. I not familiar with Durabak but seems similar to Monster Liner. In the near future I maybe painting one of my car trailers and may need to check out Durabak as it does look impressive. FYI.. most of the time and work goes into the prep work. These coating system really saves on the time and work as it not nearly as critical to go through all the sanding stages as you would with a basecoat paint. Thanks, Dean
Hi Arthur, You need to use automotive paint from your local auto paint store. For best results, use solvent based acrylic basecoat toners (ask your paint supplier to leave out the binders)
@@5150MotorSports in person did it come out the same shade of red as you wanted? I'm getting ready to do the same to a really bright color and don't want to be disappointed 🤷🏽♂️
I've watched 15 videos and upol instructions and you are the first to post nozzle rotation. Thank you!
Thanks for watching….
Tip for adding color. When I did my jeep I went to the pet store and got one of there large syringes. I could then measure exactly 50ml and squirt in directly into the raptor liner without any mess at all. I also died them all at once so I didnt have to worry about mixing them up. Color came out way lighter than I thought it would, but it actually looks better a lighter blue.
i Bee Amazin Great tip thanks for sharing...
Wow, awesome tip, seems like it would be a more precise measurement too I will have to do that when I line my vehicle soon. Thanks for that!
Thank for posting the nozzle rotations chart. I've done the 2 rotation on my quads frame . Holding up great after 5 years and a lot of abuse.
Awesome, just the kind of comment I need to hear before pulling the trigger on doing this to my vehicle! Thanks, 😁
thats the only way to shake...great moves. superb vid
Just did a low mile 93 2500 chevy with the raptor coating. Paint was falling off now it looks like a new truck. Good stuff.
Nate R Raptor Liner is amazing, professional results from a DIY.👍
@@5150MotorSports 1st time using the coating. Watched allot of vedios. Took many days to get the bad Chevy paint off the truck. Took more time in prep then putting down the raptor coat. Few over spray spots to clean up. Great finish. Glad to have become a raptor liner person.
Nate R how many bottles used
Looks great I have thought about doing my entire Fj cruiser. I will be doing my steel winch bumper this summer getting tires of repainting it every couple of years. Did my sons FJ cruiser roof in white this summer came out great. Great product easy to use. You need at minimum a 6 gallon compressor. Does not help with sound deadening I have a buddy that did his entire Fj Cruiser.
great job guys! two observations 8:22 enter the truffle shuffle! (I almost died laughing) 15:58 a standing ovation for the man who saved this project!
Great job guys. Love the scenery beautiful mountains
@5150 MotorSports Good repairing video,may I know if it's ok for you to review our foam cannon S V3.0?Thanks in advance!☺
I seen this style of keep at an off-road jamboree years ago and it's been on my build list ever since. Awesome job. 80lbs psi looked great even on cam.
Great job.help me a lot with my project.thankmypu
looks great with the Rhino liner
Thanks
Awesome video. If you look VERY closely near the neck, just above the hardener fill line, there is a light ridge indicating the tint fill line. No need to double poor.
Your a pro with that sheet metal cutter good job man
Love that red on there super nice 👍🏼
How many liters did this take you? And how many coats were you satisfied with? Maybe you said in the video but I didn’t catch it. Also what kind of paint did you mix in to get your color? Great job btw.
It’s supposed to sprayed at 50 psi the first 2 coats then 2 70 psi coats and when doing tintable raptorliner it takes 3.25 oz per bottle not 2 oz it’s going to die back some. I spray raptorliner for a living have a shop in Florida but it came out pretty good needs one more 70 psi coat to make the texture on the passenger side match and be even and consistent
When we used 45 psi we didn't like the texture it was way to course for are liking. Using 80 psi and the adjustable spray gun nozzle turned out 2 turns gave us the result we wanted. Our Raptor dealer suggested 2 oz of color base coat without binder to matched are factory color per bottle. It came out fairly close but a little light maybe 3.25 oz would have been better.
The first 2 coats are to cover then the other coats are for texture with the higher psi
Seth Oliver. I've been thinking about spraying raptor for a living I'm in texas and no one does it around me there's some line-x and toff shops but there in my opinion a little pricey. I know they offer life time warranty but how do you handle offering spraying raptor instead of them going to one of those higher end shops?
Keven Avila I started as a mobile bedliner guy and built my name and did that for 5 years then got my shop and I have a few contacts with a few companies and I do well at what I do and I do body work. But I don’t no how it works over there
Where in florida?
Hi and thanks for the reply , I actually did find it on amazon and bought it as well , Thank you!
It came out pretty dope 💯💪🏽
I actually thought first coat was at 90% coverage? Yours does look pretty darn good - I really love that color, looks a bit Candy Apple and metallic? Nice job. I think it is a pretty forgiving product! Thanks for sharing, cheers.
Thank You! The first coat was much less, as we didn't want to have and type of runs and this gives the the second coat something to adhere to. The Colorado Red look amazing in the sunlight it does have that Candy Apple and metallic look. Your correct, Raptor liner is very forgiving and easy to spray.
Nice Jeep man! What color did you use?
Question: Could you not mix up one larger batch to just refill in between? Unless I missed that, seems like I would have the potential of getting two different shades. About to do this to my truck and wondering.
Is this the first time you do this? If so good job 👏 I’m going to do my Dodge Ram 2500 and watching as many videos as I can. Any regrets or recommendations? Thanks 🙏
Use a black magic marker to circle all areas and dimples before applying bondo. Quick ID and faster application. 👍
Ps. Do the small and easy stuff first then larger and more difficult ones.
Great job guy's! Little bit of overspray in the toyota,blue car,white truck,26ft trailer and don't forget your neighbors roof.👍but I liked the video.
Nice Job! What size compressor do I need to apply this product?
Thanks for watching and the support. We used their Raptor Professional spray-gun and they recommends a air compressor that can supply 40-60 psi @ 5-6 cfm…
When you spray each label do you outline at the door jamb then fill them move to the next one? Theres no build up where you start and stop? Just keep a wet edge yes and 50% overlap?
Love the jeep and color. I just Raptor lined the interior of my 98 TJ. Had trouble finding tint. Curious as to the type of paint you used...just water based valspar?
Thanks for watching, we used Valspar Basecoat LBVR100 series and had the automotive paint store not add any binders when they mix the paint.
nice raptor liner job but you shouldn't stir body filler it's not good for it works better if you keep spreading it over and over till you get a contestant color and try and use a piece of metal or parchment paper to mix on just a tip still like the video
Yes....I've always been told to "fold" the hardener into the filler....not stir because it can lock in air bubbles and cause cracks later. Then again, I'm sure I've added air in before.....probably a scare tactic to make for good practice so it can't hurt to just keep doing it the way I'm taught! lol.
SUPER GREAT VIDEO... How good a painter does a guy need to do this, can a NEW BEE with a lot of rattle can experience do this? I have a good compressor....
i like that rough look and the color also
Robert Thomas Thanks, we are real happy how it turned out. Thanks for watching...
Is the gauge on the sprayer that comes with the kit adjustable for PSI or do I have to adjust my compressor?
You should make a video of you guys painting the Toyota pickup
It still surprises me how many raptorliner videos I see with people spraying without proper PPE. The hardener in raptor line has isocyanate, highly toxic and either you use a charcoal filter mask and change the filter every couple of hours or a supplied air respirator is needed.
I mean he is outside in the open of he was spraying in a booth then yeah he need a charcoal mask
Sprayed mine barefoot last night, no eye protection, or mask. In my closed garage and smoked at least 3 cigarettes (one per bottle shaking session)
What tool was used to trim fenders? Looks like it did a clean job
Hi Mason, its called a nippler anf workks great on sheet metal. Harbor Freight has them fairly cheap.
I recommend you paint the front grill raptor black, to this date is the gloss glossy or dull? does the dirty stick a lot?
How does it look after 4 year? Sun fade? Peeling? Would you do it again?
Hey man is there a certain type of dye you have to use to change the color
We used Visper automotive paint to tint the color, thanks for watching.
Alright thanks
Thanks for the video, it turned out great. My XJ's paint is pretty faded and developing a ton of paint chips, so it's time to repaint it. I was gonna go a cheap paint job from Maaco, but this is much more affordable, and I'll end up getting results I'll be happy with.
Raptor Liner is a great option and great for DIY easy prep. Looks great. Thanks for watching. Next month we’re going to be doing a CJ7 in Hugger Orange.
The old bondo on a piece of cardboard. Haha we've all been there at some point.
Looks great guys! My only concern is that the rough surface won't allow any gaskets for the mirrors, door handles, locks and any other surface contact gasket to seal properly allowing water to seep past them. Did you smooth out those surfaces or used some kind of filler to make a smooth surface for the gaskets?
Thanks, the Raptor Liner it not super rough, and I don’t see any issues of water sipping. We have pressure wash the Jeep several time and no sippage anywhere. It your concerned you could alway use some type of waterproof caulking under and inside the door handles and Mirrors..👍
So you dont have to buy there color you can use any color paint to tint the coat?
Yes, you buy there tintable kit, meaning you add your color.
Painters always start at the highest point work there way down don’t drag the hose on what you painted peel the tape as soon as you spray it it’s dry looks good in red
Not necessarily, some painter prefer starting at the bottom working up, you just needd to be aware of your air supply. Also your tack coat starting from the bottom helps the paint from running. The hose getting in the way is always a concern even from starting from the top, once you have one coat you need to be aware of you hose..
@@5150MotorSports I owned a body shop and have been painting 35 years , I have never started at the bottom always top down.
5150 MotorSports you want I start at the top, otherwise overspray lands on your dry paint
@30 seconds how’s was that metal sheet created to fit the rear quarter panel contours ?
Hi Richard, we usd Rock Armor rear corner armor. See link below… Thanks for watching….
affordableoffroad.com/shop/rock-hard-series-rear-body-armor-with-rub-rail-jeep-cherokee-xj-84-01/
Very cool video, thankyou
Your supposed to stay 14 inches away but sometimes you got closer my question is how did the texture turnout?.
Foeese Auau thanks for watching we wanted less texture, which you can control with your air pressure and an adjustable tip came out great!!
@@5150MotorSports I see so closer and tip pressure gives less texture I'm thinking doing this.
Hi hey got my bronco 2 painted but need to touch up can you just shoot over the dried raptor or what cant find anything on the recoat, thanks in advance frank
I’m not 100% sure, my guess would be to sand and scotch bright the area needed repairing and then Reapply raptor liner.
Amazing job!! if u don’t mind telling, which air compressor u used to get the job done?
We have a Ingersoll Rand, 60 gallon... You don’t need one this big. ThNks for watching .
I love that Colorado red 🎈 , where I can buy it from ?
Thanks for watching, any automotive paint store. Colorado Red is a stock factory color.
where do you get the paint from? i need to get some painted match to my xj and i’m not sure where to get it from and what type of paint i need. mines not a factory color btw
Hi Dominic, Thanks for watching…
Visit your local automotive paint (PBE) supply store, and they can help you color match. RAPTOR is compatible with any solvent based color, including 2K acrylic solid color and mixed acrylic basecoats, and can be added up to 10% by volume (ask your paint supplier to leave out the binders if possible for best pigment density). NOTE: Acrylic basecoat toners tend to have high color strength so use sparingly (less than 10% tint by volume). RAPTOR cannot be used with water based, polyester, or enamel paints.
@@5150MotorSports thanks you so much!
@@dominicborchmann68 have fun take your time it’s worth it…
Can you mix 2 or 3 bottles to be ready or not recommend?
I don’t see why not, but very easy and quick to mix. Thanks for watching.
Keep filming this videos i love to vatch respect
PULE KING Thanks
Nice video. Sorry if I missed it, but how big of a compressor do you think is necessary?
Hi Ginta, Thanks for watching, we used a 60 gallon 5 HP compresser. I’m not sure what the minimum CFM rating would be.
The final color is identical like the chooses color or change?
Selected
Hi GVS, we used the identical paint to match the Jeep, came out great!!! Thanks for watching and please remember to subscribe…
what color do you use? Doesn't the color come ready? If I want the dark gray color, will it come from the factory?
The compressor used is of how many horses and the air reserve tank is required of how many liters? And finally, how many PSI should be worked to paint with the gun sent by the raptor company?
Parachoques y Mecánica Farmor it’s a stock Jeep color called Colorado Red.
I Used the tintabe Raptor meaning you mix it with what color you want, I believe they do offer, black, white and grey.
I used 7 Liters of raptor liner and sprayed between 60 and 70 psi.
the jeep and the whole back drop look like real life GTA
Lol wym back drop, an do you mean gta the game?
Trevor would be proud of the Jeep 😁🤙🏻
did you notice any of the overspray on your house?
No, none at all…
Looks gd , I should do tht to my F100 72 ford and don’t have to worry about starch or chips ...👍
Nice arch kit would set it off 👍
How much for the 80s Toyota pickup in the background? Nice raptor line tutorial 👌
Sorry, not for sale Thanks for watching.
I know it's hard to see on cameras but did it have any dull spots or tiger stripes?
Not really came out very nice...
Ok cool, thank you for the reply and the info. XJ looks awesome.
How many cans of paint did you use? Cost? Have a 96 Cherokee and need to spray the area where the plastic was and my Bush wacker flairs. Wouldn't mind doing the whole thing. Same red as yours. Great video liked and subbed
Hi Keith, Thanks for the subb...
We brought two kits, each kit has 4 bottles. We used a total of 7 bottles, which leaves us one for any touch up that maybe needed in the future. Bought the kit from my local automotive paint supplier and paid around $150.00 per kit. You can find the kits cheaper on Amazon. I have provide a link below.
If you have any other question just let me know.
www.amazon.com/Raptor-Tintable-Urethane-Custom-Regulator/dp/B074KPF5X9/ref=sr_1_1_sspa?crid=3DDPFKJC83X6U&keywords=tintable+raptor+liner+kit&qid=1571503588&sprefix=Tintable+Raptor+liner%2Caps%2C185&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyS0JFVkdMODlTQ1I4JmVuY3J5cHRlZElkPUEwOTY2NjI3MUo3Nk5FRzgyVExHViZlbmNyeXB0ZWRBZElkPUEwMTIzMDY0MUFQWTU4RktFT1I5TSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
I was thinking about doing this to my YJ but I was confused as to how to add my own colors because their website has pre-set colors. Can you specify the kit you used from them?
Thanks for watching, you need to get the tintable kit and add the color you want. It’s fairly easy just take your time.
www.amazon.com/Raptor-Tintable-Urethane-Spray-Liters/dp/B01CKE7M7M/ref=mp_s_a_1_1_sspa?dchild=1&keywords=raptor+liner&qid=1588574615&sprefix=rapto&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFWN0pDWVFCVVczRjImZW5jcnlwdGVkSWQ9QTA2MTgzMjZFMTFZSVNKRElKMlomZW5jcnlwdGVkQWRJZD1BMDE1OTIwMTJESjlOU0ZOVzlMSlEmd2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
Looks nice. At 17:49-17:50 you, “She’s all Rhino Lined.” Whoops!
What psi do you recommend?
How often should you clean the gun , seems people have a lot of problems with this and whats the right thinner to use , I`ve seen conflicting reports on what thinner to use , and as before Thank you in advance.! Frank
Frank Mancuso I use lacquer thinner to clean the gun when I’m done spaying the vehicle.
Did you clean the gun when you went to mix the next bottle?
@@TBUCKETMAN I didnt , I shot 5 bottles with no problems , the caveat ,I bought the raptor gun which I think gives a better pattern I shot the smallest stipple or setting 2 turns out . wish I could post a pic came out better than i thought it would Frank
@@frankmancuso4065 frank thank you for the fast response, I got the same gun, just trying to get the most info I can before I jump in it, I hate to say it like this but it’s easier to learn from other peoples mistakes:) I think yours came out awesome.
@@TBUCKETMAN I`m like you I asked 5150 MS and got my information from them but I did learn a thing about recoating or touch up if you will , after its done drying and you want to recoat , you have to use those scotch brite pads the red ones rerough the surface lightly and reshoot , also I used my compressor and got that light dust off before hand , 1 last thing they have the red jeep , I have a 1987 bronco 2 I shot it with Mesa grey raptor and black raptor on my mirrors , bumpers and grill . I bought James Duff bumpers . Have a nice day Sir frank
Surprise you spay bottom areas first,is that recommend?
Hopefully do my Ranger bed and bumpers
Thanks
John Jude, just how we decided to start... good luck on your Ranger..
Can any red car paint be added to tint ? i.e , 2k straight red or. Base coat red ?
Yes, just make sure it an automotive type paint and ask the paint shop not to add any binders. Thanks for watching…
I downed a few and smoked a fatty while putting this stuff on. Just do the prep right and it’s hard to screw up
I want to do this to my XJ too. However I'm concerned I won't know how much I actually need. And how did you determine the job was good?
rob nyczaj we used 7 liters...
Different Strokes for different folks
My job came out with some parts shinier than others. Any tips on how to fix it?
Sorry, really don't know. Maybe someone will chime in... :)
Almost looks like aok hills/ pinions hills area?
Good Eye, Piñon Hills. Thanks for watching.
@@5150MotorSports I just scored a 2001 XJ. I'm gonna go with forrest green bed liner and looking at motivation videos.
Grew up in Big Bear. Graduated HESPERIA HIGH. I know them there foothills VERY WELL.
Hey guys beautiful job, ii'm from Italy my nane is Mike, i have i questione forma you, my track is a Mitsubishi l 200 pick-up i wanted to knowhow manyliters do needto paint my pick up? Thanks forma che advice andò Hood job
Hello Mike, Thank you for watching, we used 7 liters.
How many bottles are enough to paint a Chevrolet Silverado double cab pickup? dark gray,
Parachoques y Mecánica Farmor We used 7, on the Jeep Cherokee, I would guess around 10. Thanks for watching.
Great job.....I’m thinking of raptor lining my 93 yj same color red..... how’s it been holding on...any tips or anything you would do differently?
Gabriel Manzo Thanks.... So far its been great!!!
Gabriel Manzo: that’s a great question to ask!
Fortunately the second pass was done with way more consistent strokes. It ended up well :D
Iñigo Zapata Thanks for watching, it did come out great, our fiat pass was a sucky for a tack coat. We’re getting ready to do another Jeep CJ towards the end of summer.
@@5150MotorSports I'm going to Raptor my XJ before the end of the month, so all these videos are very helpful. Thanks!
How many bottles did you end up using in the end? Wondering if I can get away with the 6 bottle kit?
We brought 8 total, but used 7 total.
How many hours would you say you had tied up in bodywork, masking, paint in all
I say around 30.
Was the body in pretty bad shape? Sorry if I missed this part, I'm new here, but will definitely be subscribing!
@@chrischapman7657 We had to replace the passenger fender, trim both front fenders for more clearance for the 35" tires. Hood was fairly wavy which took most of the time. I say around 20 smaller dents and door dings, nothing major. One of the benefits to Raptor Liner it hides lots of the smaller imperfection that world show up in high gloss paint. Thanks for subscribing it's very appreciated. :)
I thought you were supposed to prime it first? And wait an hour between coats? How is it holding up today?
All bare metal was primed with red Oxide primer and holding up great, Thanks for watching.
Great video thanks I’ll add alil bit of thinners
What is good budget compressor for Raptor Liner?
What parts do you need as in water separator and so forth?
Thanks so much!
I've also been studying another liner product that is made to rolled on and is self leveling. It's made by Durabak. Looks very promising as there is less product wasted and less prep needed. I would love for you to do a comparison video before I purchased either.
I know that seems greedy, but I'm disabled (just becoming as I'm on my 3rd surgery in 2.5 years....my spine's discs a falling apart) and will only get one shot at this both physically and financially. I would even contact them in your behalf to see if they would give you a sample.
I just do not have the means to restore my 2003 Ranger Edge Tremor Edition with paint and conventional compressor methods. A liner job, especially one that can be rolled on, seems like the best for me.
I love the Jeep Cherokee you did here! Just a beautiful job. I could see the actual automotive companies offering this as an option soon as the Durabak liner is used on Naval ships.
Here's the link. Enjoy if you're a geek like me!
Thanks again for all your hard work. Not only is this a tough job but only tougher since you're filming and editing it both!
www.durabakcompany.com/?_vsrefdom=adwords&msclkid=d4cc8b23909e142149dcd69a075c31d3&**LP%20Branded&Durabak
Also curious as i might do this the ordinary paint
Hi Justin,
Sorry to hear about your back.
Thanks for the sharing the Durabak link, look like a standup product. :)
Not sure of the Raptor Liner compressor requirement, I do have a good size compressor which was never an issue for us plus we do have water trap integrated into the air supply line. .
You bring up some good points and might be a better option for you to rolling on vs
spraying. I not familiar with Durabak but seems similar to Monster Liner.
In the near future I maybe painting one of my car trailers and may need to check out Durabak as it does look impressive.
FYI.. most of the time and work goes into the prep work. These coating system really saves on the time and work as it not nearly as critical to go through all the sanding stages as you would with a basecoat paint.
Thanks,
Dean
Which red is that one? Hot rod red or blood red?
Thanks for watching, it’s called Colorado red.
Do you need a special kind of paint to tint the liner, or can i just go to home depot and pick whatever?
Hi Arthur,
You need to use automotive paint from your local auto paint store.
For best results, use solvent based acrylic basecoat toners (ask your paint supplier to leave out the binders)
Roughly how much did u get?
@@arthurbongiorno9715 1 paint, 2oz per Raptor Liner bottle.
@Daniele R Yes, Raptor Liner has a white kit available.
What would happen if it had rained that day, if it got wet the work would be damaged?
Yes. Any water during the painting process will damage the paintjob.
The paint dries in a few hours. It takes 7 days for it to fully harden.
Is there a guide or manual as to how to tint or color the liner?
Yes, on Raptor Liners web site. It very easy to work with... Thanks for watching.
why didnt you keep back some of your thinners to wash the measuring cup out then add that to your pot
Robert King Raptor Liner does not use thinner, just hardener. Used lacquer thinner for clean-up..
I'd be curious to see how much more heavy it is.
The kit in the box around about 5 pounds.
Every car within 1/4 mile now has a pink overspray to it.
no need to worry about anything more than 10-15 feet away. this stuff is so thick and clumpy, not a fine mist
Drama Queen award goes to...
One time I put a red shirt into my laundry with my light colors cloths an they tuned pink
Any stripes or zebra effect? Did it dry smooth? Any tips? Want to try this
house machine no zebra effect, it came out good. May want to test spay on panels as we did in the video.
Looks good guys Nice job! Was the Colorado Red color just a little bit of regular paint. You guys have a new sub. Good job guys.
Thank You, Yes we used 2 oz of Colorado Red paint..
What size compressor could one get away with?
Hello Jackie, Thank You for watching. I’m not sure, we have a good size compressor 5hp/60 gallon which I’m sure it way over kill.
@@5150MotorSports I was thinking maybe 10 to 20 gallon
did you guys use paint for the tint? great video and amazing view from up there makes me miss living out west.
Tylor Gearling yes. We use automotive grade paint.... Thanks
@@5150MotorSports in person did it come out the same shade of red as you wanted? I'm getting ready to do the same to a really bright color and don't want to be disappointed 🤷🏽♂️
fannin88 yes, we wanted to match the factory jeep red color, as we don’t want to paint the jams and is very very close.
How long did you wait before pulling the masking tape? great job by the way 👍
Thanks for watching, about an hour...
How many bottles did you use to do the whole vehicle?
We used 7 bottles total... Thanks for watching.
Have you noticed if the raptor liner has deadened road noise?
We have not driven it to much yet as were installing new carpet. I'll report once we get it done.
Hello, how bottles raptor you are spend on these jeep? Thank you...
We used total of 7 liters of Raptor Liner... Thanks for watching...
What was the Valspar Tint that you used?
ready suscrito. like i love your channel
Parachoques y Mecánica Farmor Thank You!!
Hows it holding up? Would i be able to add a gloss to keep it shiny?
So far great... I’m not sure about adding gloss, maybe someone can chime in... Thanks for Watching...