Jeep turned out awesome guys. Thank you for making it happen. Thank you for letting me be there every step of the way. U guys really worked hard and gave this roughed up Jeep new life. Thank you guys again. It was a blast working next to you guys.
This is what I love to see.... Hard Working Young Men and Joe working together and learning together. Awesome Job!!!! Keeping it real and str8 to the point. Liked & Subscribed.
Very well done. I really liked how you were teaching and telling the others working with you what/how/why things were being done in that order. Allowing people to learn good skills helps everyone. Great job. Not to big of a fan of that shade of red, but not my truck, so not my issue. As long as the owner is happy then damn skippy good work.
When putting on the body filler on the body line you should go up not across the dent that way the spreader will ride on each side of the dent and keep the filler more even with the surface of the door and you won’t have to work as hard at trying not to get a low spot that has worked very well for me over the past 40 years
I see a lot of people doing bed liner paint jobs on cars and trucks nowadays, but my brother did this on his Jeep Wrangler back in 1995. he used army green paint in the mix, so it was an army green bed liner Jeep Wrangler. Was pretty nice for going off-road.
Y'all need to get you a upol onion board for mixing body filler. That's what it's designed for, after you mix your filler and your done you pull off the used layer and you have a brand new clean board everytime you use it
I did my lower panels on my XJ...you will find that the liner holds the dirt and is hard to clean. I ended up putting black diamond plates over the liner...cleans up a lot easier
What are all these guys up to now? Keep up coming back to these videos whenever I start thinking about doing this to my old beater truck. Hope all move to better and bigger things with the knowledge gained.
Not to nag, but for your own health. Wear a mask when sanding. Doesn’t seem like much. But eventually you can fall ill from it. Be safe. Beautiful work!
Nice work - I customised my X5 and finished it with raptor (youtube X5 offroad beast - it's a little slide show), gets more attention at car shows than anything else there - will be doing more projects in the future.
Good job guys, I just subscribed because I seen that you guys are hard working. Don’t be shy and keep up the great work. Looking forward to future videos.
Wow you guys keep getting better. This is one of my favorite videos because I have the same jeep. I might be bringing it to you guys. Keep up the awesome work
Black of roof going to be hot.... Can you tint color same as original. Whats it look like when you ooen doors. Thanks for the video. Looks a lot better.
What kind of compressor and hose are y’all using I got my kit coming in since I did my dodge but I rolled it on that time with 5 coats and it’s came out great never sprayed it so I’m excited
You both are doing great reminds me of my cousin and I always doing body work in my uncles yard keep it up 👍. Also how many bottles dose it take to get a single cab Silverado done same color and how many coats are you putting on . Thanks 🙏
just for the outside of an xj (not underneath or the axles) it probably takes as little as 5 liters or as much as 7 liters. i have used 16-20 liters so far. but that is interior floor, exterior, underside, both axles, and a few other parts for other cherokees... this stuff is very easy to achieve great results, just follow the instructions and make sure your prep is perfect
Mannn! Sweet looking jeep guys y'all doing awesome jobs 👌👍. What part of Texas are yal from I want to do my burban but just the top half like from the bottom of the window up how much would that cost?
The rims look like basic budget steel rims with the D cut out in em. Go on Quadro-tec or Amazon and type in XJ rims and you'll see these for around 60 to 70 US. The tires are BF Goodrich and probably around 32x10.5r15
I’ve seen it. It’s FN sweet! I plan on a two tone for my ride. Black lower and gun metal blue (ofcourse flat) I hope it turns out as good as these guys. Otherwise I’m gonna have to drive and spend a week out there.
Now I was saying to myself they don't look like their fit to do any type of paint job. But seeing the results it looks amazing like wow. Blew my mind 😂That just show anybody can bring anything to life
Jeep turned out awesome guys. Thank you for making it happen. Thank you for letting me be there every step of the way. U guys really worked hard and gave this roughed up Jeep new life. Thank you guys again. It was a blast working next to you guys.
Hell yes, this is the video I needed. Someone actually showing the work being done. nice job
The two tone came out even better
Dude! That's rad! Keep up the good work. I had a Cherokee like that in my 20's. Awesome memories in that thing!
This is what I love to see.... Hard Working Young Men and Joe working together and learning together. Awesome Job!!!! Keeping it real and str8 to the point. Liked & Subscribed.
Very well done. I really liked how you were teaching and telling the others working with you what/how/why things were being done in that order. Allowing people to learn good skills helps everyone. Great job.
Not to big of a fan of that shade of red, but not my truck, so not my issue. As long as the owner is happy then damn skippy good work.
Worked in auto body shop for many years. You guys are awesome! Thanks for the inspiration again.
I swear yall keep it up big things are comin yall way💯
Love the way this came out with the 2 tone. If I was close I'd let yall do my jeep same way
BADAZZ!! LOVE THE 2 TONE RED & BLACK LOOK.. KEEP IT UP!!
U guys did a nice job on that how did the rino liner hold up after u did it
Jeep came out great
When putting on the body filler on the body line you should go up not across the dent that way the spreader will ride on each side of the dent and keep the filler more even with the surface of the door and you won’t have to work as hard at trying not to get a low spot that has worked very well for me over the past 40 years
another fine job guy,s . like to see more people wanting two tones..on to the next job!!!
I see a lot of people doing bed liner paint jobs on cars and trucks nowadays, but my brother did this on his Jeep Wrangler back in 1995. he used army green paint in the mix, so it was an army green bed liner Jeep Wrangler. Was pretty nice for going off-road.
Y'all need to get you a upol onion board for mixing body filler. That's what it's designed for, after you mix your filler and your done you pull off the used layer and you have a brand new clean board everytime you use it
Really enjoyed this video as well as the others. You guys are getting better and better at your craft. Way to pass it forward to someone else
This reminds me of my high school "news" segment. Keep up the good work, men!
After watching a bunch of videos and subscribing I think I'm going to Raptor liner in my pickup truck when spring rolls around thanks
Looks bad ass ...turned out great.🤙👍
Good job! Adding some clear would've been awesome!!
I did my lower panels on my XJ...you will find that the liner holds the dirt and is hard to clean.
I ended up putting black diamond plates over the liner...cleans up a lot easier
What about with a power washer?
@@mikemc4340 ...that would probably help to clean them
What are all these guys up to now? Keep up coming back to these videos whenever I start thinking about doing this to my old beater truck. Hope all move to better and bigger things with the knowledge gained.
Not to nag, but for your own health. Wear a mask when sanding. Doesn’t seem like much. But eventually you can fall ill from it. Be safe. Beautiful work!
"Alright Guys" You guys honing your skills & just keep getting better . Nice finished product! And a nice edit ;) Great Work!
Another awesome job .You should be sponsored by the company who makes that brand of paint that's how you make the big bucks
make sure to disconnect the battery when welding on cars
Is there a way to do a nice black and blue raptor paint job on a 2013 Jeep Wrangler
Keep it up guys
I enjoy watching your videos
Cool Jeep 🔥👍🏽
Youngsters got down GREAT JOB.
I see you guys keep improving.... that one turned out nice! Keep it up
You guys did a great job. Stay strong and keep pushing forward. You guys have a talent.
Thanks for the support brother!👍🏼
Well done fellas. Looks great
I love a nice xj great job guys, keep up the good work
This one looks very very well done ... Very nice
Outstanding job! Well done!
Excelent work! About how many cans did you use to do the whole vehicle??
That looks awesome great job!
Came out great. 🍻
Nice work - I customised my X5 and finished it with raptor (youtube X5 offroad beast - it's a little slide show), gets more attention at car shows than anything else there - will be doing more projects in the future.
Good job guys, I just subscribed because I seen that you guys are hard working. Don’t be shy and keep up the great work. Looking forward to future videos.
Well said!
One word, CLEAN!
Wow you guys keep getting better. This is one of my favorite videos because I have the same jeep. I might be bringing it to you guys. Keep up the awesome work
Black of roof going to be hot.... Can you tint color same as original. Whats it look like when you ooen doors. Thanks for the video. Looks a lot better.
Great work. Straight to the point video. How much do you charge for a job like this?
Absolutly outstanding!
Excellent work men.
What kind of compressor and hose are y’all using I got my kit coming in since I did my dodge but I rolled it on that time with 5 coats and it’s came out great never sprayed it so I’m excited
Great job looks amazing
that's came out nice one of the best so far
You both are doing great reminds me of my cousin and I always doing body work in my uncles yard keep it up 👍. Also how many bottles dose it take to get a single cab Silverado done same color and how many coats are you putting on . Thanks 🙏
Great job guys. Y’all do great work. I need to do my 96 k1500. I want to do it red.
looks nice but why not use gloss paint or use clear coat paint will last longer
Do you paint interior doors too o just outside
Great job, looks awesome.
Not bad but the customer should have done red on top
How many liters did ya’ll end up using?
Wondering the same thing. These videos never say
@@TheMortgageMisfit don't waste your time, they work fine, but they don't answer a fucking message
@@Farmor4x4 They do when someone ask a price lol
You guys has earned yourselves a new subscriber..😁👍
I would buy it ... looks great
How much raptor did this one take? I want to do my Cherokee, and I'm trying to estimate how much I'm going to need
just for the outside of an xj (not underneath or the axles) it probably takes as little as 5 liters or as much as 7 liters.
i have used 16-20 liters so far. but that is interior floor, exterior, underside, both axles, and a few other parts for other cherokees...
this stuff is very easy to achieve great results, just follow the instructions and make sure your prep is perfect
Looks like a brand new Yeep!
Mannn! Sweet looking jeep guys y'all doing awesome jobs 👌👍. What part of Texas are yal from I want to do my burban but just the top half like from the bottom of the window up how much would that cost?
Looks awesome great job!!!!!
How much would it be on a 1999 Jeep Cherokee sport? Same paint process, only difference is, it would be blue. Located in Brownsville, Tx
Hey brother please email us, we can help you out 👍🏻👍🏻👍🏻
Raptor Paint Jobs RGV i already did lbmtech0313@gmail.com
Absolutely new to this. What grit do you sand at each phase
That XJ looks sweet, Now I would want the Diffs dropped and sprayed with some POR 15 Chasis Black to top her off.
What psi do your shoot at? Also, which pass is heavier the first or second ??
Nice work boys!
Great job guys great video
Hey guys, how do you make the tires very wet and shiny? What do you use? Thanks!
Very nice. Good job!
Great job 😬👍🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻🎉
How mitch product did this take I'm nowhere near you and I would like to do this with my jeep cherokee same model as the one in the video
You can just add whatever color paint you want to the liner?
Any color tint, but you don't add paint to it.
Look good job 👍
What kind of sand paper you use to prep the body?
Looks good but a little Heavy on the etch primer don’t use it like primer or on body filler it has acids in it that can eat the putty
How many kits did you need to paint it?
Where are you guys located. I have a chevy tracker I would like to do that.
Questions what More good Cherokee xj manual lift suspension 4" or automatic lif suspension 6": LED me know please
How many bottles you needed for that truck.""?
Awesome 👍
Great job guys!
Fold the body filler! Don't mix! Great job on everything else bro!
I was thinking same thing! I seen them wipe some unmixed hardener on lol
The black roof is cool but the drop shadows on the windows look kind of out of place, especially since the front windows don’t have it.
How much did this cost I have an jeep xj I might want to do this to?
What are the wheels and tires. I want the same ones
The rims look like basic budget steel rims with the D cut out in em. Go on Quadro-tec or Amazon and type in XJ rims and you'll see these for around 60 to 70 US. The tires are BF Goodrich and probably around 32x10.5r15
Another great job!
Pretty nice job 👌
Have you done a sand storm color raptor liner? Sand Color of the tacoma?
Same process just add the color tint to the raptor liner
@@XloMotion don't know if I want to do that or all black on my 2002 tacoma 🤔
I’ve seen it. It’s FN sweet! I plan on a two tone for my ride. Black lower and gun metal blue (ofcourse flat) I hope it turns out as good as these guys. Otherwise I’m gonna have to drive and spend a week out there.
Great work!
Me gusto mirar a jóvenes asiendo cosas positivas buen trabajo muchachos
Now I was saying to myself they don't look like their fit to do any type of paint job. But seeing the results it looks amazing like wow. Blew my mind 😂That just show anybody can bring anything to life
Solid work !
Great jeep
Id like you to come up here to Portland Oregon, and spray my 1975 International firewood delivery truck.
How much paint did u have to use. I have a 89 xj jeep cherokee laredo want to paint black but in rino line
One kit done my whole Jeep. 2 coats and 1 drop coat
How many bottles is a kit, I see 4,6,8 bottles in the kits?
good job .but the next one covers the wheels with plastic
That’s some next level god stuff. You should do a Tahoe next lololol
Looks good fellas