How To Make 4" Paper Hemispheres for Fireworks + Making Needed Tools

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ต.ค. 2024

ความคิดเห็น • 50

  • @MakeAndDestroyFireworks
    @MakeAndDestroyFireworks  2 ปีที่แล้ว +4

    Tutorial for 3" Hemispheres or any other size: bit.ly/3Ln3fxk

  • @ecartman3100
    @ecartman3100 2 ปีที่แล้ว +1

    Love your progress with these fireworks and passing it on 👍

  • @malcolmreynolds7122
    @malcolmreynolds7122 2 ปีที่แล้ว +1

    Very good video showing mistake and correction. You have made a lot of progress! Thanks for the video.

    • @MakeAndDestroyFireworks
      @MakeAndDestroyFireworks  2 ปีที่แล้ว

      Thanks, the point is that If I put out only successful builds all the time, you wouldn't see extra steps that need to be done to fix failed build.

  • @thunderkinginkwark271
    @thunderkinginkwark271 2 ปีที่แล้ว +1

    Turned out nice!

  • @vendright
    @vendright 2 ปีที่แล้ว

    Thanks for sharing. Very helpful

  • @weld_dat_fakah740
    @weld_dat_fakah740 2 ปีที่แล้ว +1

    These look great 👍 I'm glad to see you making video again. Your shells look great! Maybe you could make a video on how to paste the shell so it looks like the commercial ones... or maybe for to improvise the wrapping machine 🤔....
    Just a thought.. love your show! God bless from USA 🇺🇸

    • @MakeAndDestroyFireworks
      @MakeAndDestroyFireworks  2 ปีที่แล้ว

      I could try out to wrap like wasp machine, but will see how my plans go :) Thanks.

  • @kristianschembri7165
    @kristianschembri7165 2 ปีที่แล้ว

    Can't wait to start 🙌

  • @ugtyujuser-yb4eu9jx6v
    @ugtyujuser-yb4eu9jx6v ปีที่แล้ว

    Thankyou for the idea ..this will help me make ferrero rocher shell..

  • @dk-pyro-bang6288
    @dk-pyro-bang6288 2 ปีที่แล้ว +1

    Like allways great job 👏👍

  • @EindhovenVuurwerk
    @EindhovenVuurwerk 2 ปีที่แล้ว

    Nice, stuff is getting bigger :D

  • @WildernessMedic
    @WildernessMedic 10 หลายเดือนก่อน

    I can't seem to find an answer anywhere.... What is the paste you use for forming the Kraft paper into shells?

  • @silvajohnny2682
    @silvajohnny2682 2 ปีที่แล้ว

    This is brillant! ❤

  • @MarioMario-iy2oz
    @MarioMario-iy2oz 2 ปีที่แล้ว

    Great job. I think your hemispheres will be fine and you can make from them outstandind fireworks. The commercial paper hemispheres for 4" have 93mm outside diameter and walls are 4mm thickness.

    • @MakeAndDestroyFireworks
      @MakeAndDestroyFireworks  2 ปีที่แล้ว

      Thanks for sharing, so I'm a bit under, but will see how much will other layers add on, thanks again.

  • @sfhbarayaalam
    @sfhbarayaalam 2 ปีที่แล้ว +1

    Saya suka video anda🤗

  • @PYROWORKSTV
    @PYROWORKSTV 8 หลายเดือนก่อน +1

    Nowadays you also could just 3D print a mold

  • @codetutor6593
    @codetutor6593 8 วันที่ผ่านมา

    Could you show us an 8 inch shell? :)

  • @Lionman-rw7xb
    @Lionman-rw7xb 2 ปีที่แล้ว

    BTW C6 stars usually go into spider shells, they are fast burning stars. For shells like yours, i believe tiger tail stars are better.

  • @karllaun2427
    @karllaun2427 2 ปีที่แล้ว

    Great tutorial. Do you have to put anything on the plaster mold to keep glue/moisture off of it?

    • @MakeAndDestroyFireworks
      @MakeAndDestroyFireworks  2 ปีที่แล้ว

      No need for any protection, I've made more than 60 hemispheres on my 3 inch one and it doesn't seem to care :)
      You can only maintain it by scratching off possible dried glue layers from previous builds but that doesn't ever make significant problems.

  • @shubhrajstar
    @shubhrajstar 2 ปีที่แล้ว

    ♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️

  • @Hoatroi137
    @Hoatroi137 10 หลายเดือนก่อน

    Helo bạn có thể cho tôi xin công thức làm hạt star được không thank you!

  • @madsfleetwood5337
    @madsfleetwood5337 2 ปีที่แล้ว

    I have to ask what do you see for paper and glue and where do you get it

    • @MakeAndDestroyFireworks
      @MakeAndDestroyFireworks  2 ปีที่แล้ว +1

      I've said it over and over, kraft paper from stationery shop and white water-based wood glue from paint store. Make sure you sub to the channel so you don't miss needed information. Cheers!

    • @licoricxsyreax
      @licoricxsyreax 9 หลายเดือนก่อน

      @@MakeAndDestroyFireworksis glue fine?

  • @gianco88
    @gianco88 9 หลายเดือนก่อน

    But i have to dry the hemis on the plaster?

    • @MakeAndDestroyFireworks
      @MakeAndDestroyFireworks  9 หลายเดือนก่อน

      You can reshape them a bit later when they dry with mold but don't have to keep them on it

  • @khainguyenvan80
    @khainguyenvan80 ปีที่แล้ว

    What is the mold ball?

    • @MakeAndDestroyFireworks
      @MakeAndDestroyFireworks  ปีที่แล้ว +1

      Mold is made out of plaster, hemispheres are paper. And I usually use Christmass ornaments to shape plaster molds.

  • @jamisonlm3
    @jamisonlm3 2 ปีที่แล้ว +2

    Am I the only one that thinks the uncut hemispheres look like little hats?

    • @samuelericsson2143
      @samuelericsson2143 2 ปีที่แล้ว +1

      Yeah i was thinking about that too like: Hmm those uncut hemis would probably suit my dog nicely..

    • @MakeAndDestroyFireworks
      @MakeAndDestroyFireworks  2 ปีที่แล้ว +2

      I think there wasn't a batch that I didn't try out on my cats, especially 3" :)) So.. These are hats we just use them differently lol

  • @radzzlumabong7480
    @radzzlumabong7480 2 ปีที่แล้ว

    What's the name of the dement you use?

    • @MakeAndDestroyFireworks
      @MakeAndDestroyFireworks  2 ปีที่แล้ว +2

      If u meant plaster, it doesn't matter, but mine was Knauf brand. Any plaster will work.

    • @radzzlumabong7480
      @radzzlumabong7480 2 ปีที่แล้ว

      @@MakeAndDestroyFireworks tnx

  • @Chinhnguyen0497
    @Chinhnguyen0497 ปีที่แล้ว

    how to make gunpowder pls

  • @radzzlumabong7480
    @radzzlumabong7480 2 ปีที่แล้ว

    Can you make 1"inch🥺

    • @MakeAndDestroyFireworks
      @MakeAndDestroyFireworks  2 ปีที่แล้ว +1

      Maybe u try out this project with some balloons filled with water to fit less than 1",freeze it, make plaster in bucket, fastly press frozen balloon ball in it and hold, there u go, nice idea I think :))

    • @radzzlumabong7480
      @radzzlumabong7480 2 ปีที่แล้ว +1

      @@MakeAndDestroyFireworks thanks

    • @radzzlumabong7480
      @radzzlumabong7480 2 ปีที่แล้ว +1

      @@MakeAndDestroyFireworks can plaster of Paris work?

  • @AB_Pyrotechnic
    @AB_Pyrotechnic 2 ปีที่แล้ว

    it might be worth your time to buy a 3d printer. you can 3d print 2 inch ball shells for $0.12 USD per set. You can also 3d print the mold to press your hemis. Ive pressed hundreds with no signs of wear.

    • @kaaasis
      @kaaasis 2 ปีที่แล้ว

      Can you send the files for the shells, press and mold?

  • @pyrounity5663
    @pyrounity5663 2 ปีที่แล้ว

    Are you german?