The 372 x torq caused me to look at different coils why mine was blue and my old ones were black (unlimited). By the time i realized what was going on i burnt 2 of them up by using 50:1 mix (pto side) and adjusting carb to perform like original 372. I have accepted the new changes and switched to 40:1 ratio. No problems since then. Also no more 372 x torq😁.
great job afleetcommand lots of good info well one of the good things iv learned is if i find a 2010 xtorq with a bad topend for cheap theres a good chance bottom end still good with steal cage Barings lol but awesome job explaining everything wonder if they stopped doing steal cage barings a certain on the regular 372 just looked the year on my 372 its a 2001 still going strong i did put a top end on it tho
Nwp coil I’ve used have served me well for a year now. I’ve used several being the black OEM coil is so hard to find and there price. Wolf creek is where I got them from also there crank is pretty good for aftermarket
I love my light to I have dropped it like 6 feet on to the floor like 3 times finely broke it plastic welded it back together and it's been working for a year my wife had to have one for Christmas for her sewing I have a 2014 372 xtork with steel cage bearing because I put them in there and you gave me the kind to buy and the numbers and it still running fantastic however I have so many saws I can't put much time on any one saw I have a neo-tec 660 update coming soon
I bought an 372 xp xtorq 2022 model, adjusted the carburetor, didn’t put an unlimited coil in it. It runs great, should I have any worries, or just run it.
My xtorque has mild woods port with muffler mod and it's done good so I'd say your good too but id still ask others to be safe. I'm not in a position to really give advice, just sharing how mine is
I would guess that is one of jim's saws, he is one of the only ones i know who does horse logging.He brought it to the right man to have it gone through.
I have a Makita angle head flashlight, that I put a led bulb in that I use like that Bauer you have, for those that still have them it’s worth finding a led bulb.
![[กูเพิ่งซื้อมึงปิดหนี] 20 นาที ผมรีวิวเกมที่แย่ที่สุดในโลก CONCORD](http://i.ytimg.com/vi/XhC-3q3Ii7I/mqdefault.jpg)
The 372 x torq caused me to look at different coils why mine was blue and my old ones were black (unlimited). By the time i realized what was going on i burnt 2 of them up by using 50:1 mix (pto side) and adjusting carb to perform like original 372. I have accepted the new changes and switched to 40:1 ratio. No problems since then. Also no more 372 x torq😁.
Great video. I also haven’t had much luck with cheap aftermarket parts. They often need a slight modification to get them to fit correctly.
Very good video.
Vintage HTSS.
They discontinued the 372xp right after I bought one. No complaints here. Thanks for the vid
great job afleetcommand lots of good info well one of the good things iv learned is if i find a 2010 xtorq with a bad topend for cheap theres a good chance bottom end still good with steal cage Barings lol but awesome job explaining everything wonder if they stopped doing steal cage barings a certain on the regular 372 just looked the year on my 372 its a 2001 still going strong i did put a top end on it tho
Fantastic Job 😀😊😀
Nwp coil I’ve used have served me well for a year now. I’ve used several being the black OEM coil is so hard to find and there price. Wolf creek is where I got them from also there crank is pretty good for aftermarket
Good Video Walt, the saw sounds good. Do you prefer the 372 OE muffler with the port on top or the X-Torq muffler with the pipe out the front?
Well done walt
Nice build, sir.
I am currently rebuilding a 372xp that had a steel cage crank bearing fail. OEM crank bearings I recieved are plastic caged.
Ok...request the SKF steels. An OEM bearing for the X-Torqs from 2012-now will be nylon. The OEM bearing for OE 372's prior to 2010 are steel
I love my light to I have dropped it like 6 feet on to the floor like 3 times finely broke it plastic welded it back together and it's been working for a year my wife had to have one for Christmas for her sewing I have a 2014 372 xtork with steel cage bearing because I put them in there and you gave me the kind to buy and the numbers and it still running fantastic however I have so many saws I can't put much time on any one saw I have a neo-tec 660 update coming soon
Number one is Walter!! 👌🙋
Great video. Thanks.
I bought an 372 xp xtorq 2022 model, adjusted the carburetor, didn’t put an unlimited coil in it. It runs great, should I have any worries, or just run it.
My xtorque has mild woods port with muffler mod and it's done good so I'd say your good too but id still ask others to be safe. I'm not in a position to really give advice, just sharing how mine is
Very sad to hear about Ashokan Turf&Timber closing.
I would guess that is one of jim's saws, he is one of the only ones i know who does horse logging.He brought it to the right man to have it gone through.
Nope not a "jim" :)
I have a Makita angle head flashlight, that I put a led bulb in that I use like that Bauer you have, for those that still have them it’s worth finding a led bulb.
Looks like they cut a full wrap handle. What a shame. I’m sure someone would have gladly traded a normal wrap for the full.
I encountered the same on an eBay 266xp … Those factory full wraps aren’t very plentiful !
Nice 😊 mate 🤠👌👌👍
Mantap gan 👍
Did it get rings?
Walter, what do you think about 500i? 🤔
The ultimate bling saw :)