How to reset electronic handbrake - Mercedes C63 AMG
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- How to replace rear brake pads on Mercedes C63 Amg.
(205) (14-) 350 kW (476hp) 5500 rpm
R-Cat (2015-2018)
Preparatory operations
Note: DO NOT depress brake pedal.
Activate service mode:
Ensure all doors, boot and bonnet are closed.
Turn ignition key to position I.
Ensure odometer is displayed, if not: Press and hold back button until odometer is displayed.
Release back button.
Press and hold telephone button.
Within 1 second: Press and hold "OK" button.
After approximately 5 seconds: The menu options "Vehicle data", "Dynamometer test", "Change brake pad" and "ASSYST PLUS" will be displayed in the multifunction display. Release telephone button and "OK" button.
Repeatedly press down arrow button until "Change brake pad" is highlighted.
Press "OK" button.
The message "Move to assembly position" will be displayed in the multifunction display.
Press "OK" button.
The message "Assembly position reached" will be displayed in the multifunction display.
Switch ignition OFF.
Remove ignition key.
Draw off sufficient brake fluid from brake fluid reservoir to enable rear brake caliper pistons to be reset.
Brake pad removal and fittingNote:
Refer to "Technical specifications" for brake disc and drum dimensions.
Remove rear wheels.
Disconnect brake pad wear sensor harness multi-plug.
Detach rear brake caliper from caliper carrier. Move brake caliper aside and support with wire.
Remove rear brake pads. If brake pads are to be re-used ensure they are marked to enable them to be re-fitted to their original positions.
Press rear brake caliper piston fully in.
Note: When fitting new brake pads, fit new anti-rattle springs.
Fit brake pads.
Fit rear brake caliper to caliper carrier. Tightening torque: Refer to "Technical specifications".
Connect brake pad wear sensor harness multi-plug.
Fit rear wheels. Tightening torque: Refer to "Technical specifications".
Operate brake pedal until resistance is felt.
Top up brake fluid. Refer to "Technical specifications".
Resetting
Deactivate service mode:
Turn ignition key to position I.
The message "Assembly position reached/Exit assembly position" will be displayed in the multifunction display.
Press "OK" button fig1.C.
The message "Assembly position exited" will be displayed in the multifunction display.
Press "OK" button fig1.C.
The menu options "Vehicle data", "Dynamometer test", "Change brake pad" and "ASSYST PLUS" will be displayed in the multifunction display.
Press back button fig1.A.
Switch ignition OFF.
Remove ignition key.
For more information please Visit our Website.
www.tajtyres.com
www.tajmotstati...
www.tajrentals.com
/ tajtyres
/ tajtyres
/ taj-tyres-31b451116
/ taj.tyres
/ tajmot
Please subscribe for more videos
Great, worked for me 1st time unlike others, many thanks👍🏻
Perfect mate. Very helpful 👍
Thank you
Bro i need urgent help
I have the 2018 c63s model
I believe its the exact same system since my interior looks exactly like yours
My rear brakes are causing soooo much noise after replacing the pads recently..
Without putting pressure on the brakes, the rear brakes are causing noise as if they are being pressed.
Idk if this procedure will help or not, il give it a try in an hour.
The same people who replaced my brakes (original amg brake pads)
They told me the ACU is giving a false command to the brake system telling it to apply more force.
What if I need to remove the calipers for an extended period of time? Will it harm the system if I turn the ignition off with the calipers removed? I am getting ready to powder coat the front and rear calipers on my 2012 C63, and am concerned about the electronic rear handbrake.
Thank you
Is this only for the rear brake pads or for the FRONT as well i have a CLA 250C
Only for the electronic handbrake and fronts are normal
If the procedure doesn't work, try closing all the doors.
Can someone tell me the location of the EPB module on this car?
I've got amg gla45 2017 yellow night and I've pushed every button on the steering wheel ..with zero luck anyone got any idea here.??? my steering wheel has 6 buttons on left and 6 on the right
Hello Taj I have a 2017 gls63 that I bought second hand but the rear brakes need replacement however when I do the procedure to replace the brake pads I get an error where it says pads not in the right position and I cant select anything what do I do?
Hi if you got error coming up then you may not be able to do manual reset and you will have to take it to a workshop so they can use the diagnostic tool to reset and remove all error codes..
does this work on a 2018 E 300 cabrio?
Hi yes same procedure.