DIY Adjustable "Mullet" Dumbbell System (Flat Bottom!) - Poor Man’s IronMasters

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ก.พ. 2021
  • • 💪DIY FLAT-BOTTOM “Mullet” Dumbbells. Easy and fun to make Homemade Dumb bells. Poor Man’s Iron Masters, Pepin, or BaadAss Dumbbell. This is a video for the construction of a DIY quick-change, flat bottom Dumbbell “system.” You need to supply your own plates (iron or concrete). This is not a video on how to construct DIY plates.
    ________________________________
    🙏AFFIILIATE LINKS (Please use when Shopping to Support the Channel):
    -AMAZON: amzn.to/2UQGqfA
    -ROGUE: bit.ly/3JlRhCq
    -TITAN: bit.ly/3rSRZkQ
    -ABMAT: bit.ly/3uWpaWn
    -Plate Snacks: bit.ly/3gPrlTu
    -Optimum Nutrition: bit.ly/3LyOPdD
    -Iron Bull Strength: bit.ly/3GPqXyP
    ________________________________
    COMPANION VIDEOS:
    Kettlebell Video: • DIY Adjustable T-Handl...
    Plate Pin Video: • DIY Plate Loading Pin
    ________________________________
    👕 T-SHIRTS AVAILABLE HERE: www.bonfire.com/diy-fitness-c... ________________________________
    ⛔️ DISCLAIMER: This video is for inspirational purposes only. There is an inherent risk assumed when making your own fitness equipment. Do so at your own peril.
    ________________________________
    🕸 FOR MORE DETAILS: www.DIYFitnessClub.com
    DISCLAIMER: This video is for inspirational purposes only. There is an inherent risk assumed when making your own fitness equipment. Do so at your own peril.
    ---------------------------------------------------------------
    🛍🛒 PLEASE SUPPORT the channel by clicking the amazon link below before buying anything on Amazon. It costs you nothing extra to do so, but it helps support buying materials needed to keep making these videos and help paying SquareSpace to host the website. THANK YOU SO MUCH! 🙏
    amzn.to/3vxMQxA
    • FAT GRIPZ PRO HANDLES: amzn.to/3xTDkXe
    • 1" Weight Plates: amzn.to/3KHwjhr
    • PIPE, 1” Schedule 40 PVC : amzn.to/3w2d6lf
    • PIPE, 1.5" Schedule 40 PVC:
    • Pipe, PVC Cutter: amzn.to/3KHwOZ4
    • Conduit:
    • Grinder:
    • Metal Cutting Disc:
    • Grinder Disc:
    • Dremel:
    • Dremel Accessory Pack:
    • Black Electrical Tape:
    • Rubber Mallet: amzn.to/3KLVXSn
    • 3 / 4” Floor Flange: amzn.to/3klvoIk
    • 3 /4” x 6” Long Nipple: amzn.to/3lKcwnb
    • 3 /4” x 8” Long Nipple: amzn.to/385aNWN
    • 3 /4” x 10” Long Nipple: amzn.to/3ygLBaj
    • 3 /4” x 12” Long Nipple: amzn.to/387Xk0n
    • 1” Washers (10 PACK): amzn.to/372zL8m
    • 1 / 2 “ Floor Flange: amzn.to/3ITYsRv
    • 1 /2” 6” Long Nipple: amzn.to/3i3lcUC
    • 1 /2” x 8” Long Nipple: amzn.to/3yd01II
    • 1 /2” x 10” Long Nipple: amzn.to/3FkkL2T
    • 1 /2” x 12” Long Nipple: amzn.to/3vZ75G8
    • 7 / 8” Washers (10 PACK): amzn.to/3IXpis3

ความคิดเห็น • 87

  • @JanSobieskiIII
    @JanSobieskiIII 3 ปีที่แล้ว +21

    Absolute best DIY system on the internet. Very great for the common man!

    • @DesignBuildLift
      @DesignBuildLift  3 ปีที่แล้ว +1

      Thank you so much for the kind words!

  • @michaelkulman7095
    @michaelkulman7095 3 ปีที่แล้ว +2

    Great! I was thinking of foregoing bells, having priced Iron Masters, Power Blocks and fixed bells, going barbell only, or spin lock, now I'm reconsidering!

  • @shiwakuseven5859
    @shiwakuseven5859 3 ปีที่แล้ว +5

    I made a pair of 60 lb dumbbells after watching this video. Thanks for the info and the idea!

    • @DesignBuildLift
      @DesignBuildLift  3 ปีที่แล้ว +1

      Thank you! When I hear this, it drives me to continue making videos! Many more videos on the way soon. Right now I am in the process of shooting and editing... Happy Lifting, my friend!

  • @keuler3859
    @keuler3859 2 ปีที่แล้ว +5

    Found your channel and built my own over the weekend. Finished up a chest workout and bicep workout over the last 2 days with these! Amazing. Bought 2 different size nipples to accommodate more weight ranges! Amazing!

    • @DesignBuildLift
      @DesignBuildLift  2 ปีที่แล้ว

      Awesome! Glad to hear it!!!!! Thank you for supporting the channel!!! 🤘🙏💪

  • @JoeBlankenfeld
    @JoeBlankenfeld 2 ปีที่แล้ว +6

    This TOTALLY rocks!!!!! You've given me SO many ideas!!!!! Thank you!!!!!!!!!!!!!!!!!!!!

    • @DesignBuildLift
      @DesignBuildLift  2 ปีที่แล้ว

      Thank you, Joe! I appreciate it!!! Thank you for supporting the channel! 🤘💪🙏

  • @austindeshazo1428
    @austindeshazo1428 3 ปีที่แล้ว +1

    Great idea!

  • @marklee6701
    @marklee6701 2 ปีที่แล้ว +4

    I like the concept. You could cut the pipe for exact lengths, cut new threads and put a floor flange on both ends. Wouldn’t be adjustable but look like legit dumbbells.

  • @P10101G
    @P10101G 8 หลายเดือนก่อน

    Subbed cause of this video. I built these over the weekend. Cost me ~$42 for the 12inch pair. I believe they are still worth it if you have the extra weights. I did add a piece of pvc between the pipe and weight holes for a tighter fit. Not needed, just a personal preference. The work great and no stabby stabby. Thank you for sharing.

    • @DesignBuildLift
      @DesignBuildLift  8 หลายเดือนก่อน

      That is awesome to hear!!! Thank you so much!

  • @tntjr
    @tntjr 2 ปีที่แล้ว +2

    Love the channel. I use hose clamps on my loadable dumbbells.

    • @DesignBuildLift
      @DesignBuildLift  2 ปีที่แล้ว

      Thank you! I appreciate that! Good idea. Cheers!

  • @ArtGuitarLTX
    @ArtGuitarLTX 2 ปีที่แล้ว +4

    This plus concrete weights = extra money in my wallet. 👍 Great video my man. 👍👍

  • @luluandbear7932
    @luluandbear7932 3 ปีที่แล้ว +2

    Great video. I subscribed and turned on notifications!

  • @no-handles
    @no-handles 3 ปีที่แล้ว +1

    genius!

  • @matthewsetzer5251
    @matthewsetzer5251 4 หลายเดือนก่อน

    This is awesome bud ,thank you

    • @DesignBuildLift
      @DesignBuildLift  4 หลายเดือนก่อน

      You bet! Thank you for supporting the channel!!! 🤘🙏💪

  • @devonzachariasmedia
    @devonzachariasmedia 2 ปีที่แล้ว +1

    Brilliant thanks for the idea.

    • @DesignBuildLift
      @DesignBuildLift  2 ปีที่แล้ว +1

      Thank you, Lil Grim!!! If you make these (or any other DIY Fitness Club project) please let me know!

    • @devonzachariasmedia
      @devonzachariasmedia 2 ปีที่แล้ว

      Will do! What's the heaviest weight you've tested with this method?

    • @DesignBuildLift
      @DesignBuildLift  2 ปีที่แล้ว

      @@devonzachariasmedia 145lb on 18” Nipple was the heaviest I assembled. Now can I press a 145 LB dumbbell? Hell no! 💪

    • @devonzachariasmedia
      @devonzachariasmedia 2 ปีที่แล้ว +1

      @@DesignBuildLift That's awesome man! I'm not too familiar with the parts used in this video but it seems solid and really if you have fat gripz already is as easy as it gets. Planning to try and scoop up a few hundred pounds of "1 sized plates now. Thanks again for the idea!

  • @kkutube1972
    @kkutube1972 7 หลายเดือนก่อน

    Love this.

    • @DesignBuildLift
      @DesignBuildLift  7 หลายเดือนก่อน

      Thank you!!!! I appreciate the support!!!

  • @edwardp4417
    @edwardp4417 2 ปีที่แล้ว +1

    How's your grip on the dumbbells using the EMT conduit wrapped in tap? How does it compare to knurling on a commercial dumbbell? I'm thinking about making some fixed weight dumbbell handles handles and wrapping the EMT conduit in anti slip tap; the kind that is used for traction on steps.

    • @DesignBuildLift
      @DesignBuildLift  2 ปีที่แล้ว +2

      Great question! Anti slip might work. Have not tried it….not sure how it would hold up though. Some other options to consider: could add grip tape, spray truck bed liner on the EMT, or perhaps add some rubber grips on the EMT (got any used bicycle handle bar grips?)….my 2cents: whatever you do - do it on the cheap. If not done cheaply- then at a certain point it just makes more sense to buy instead of make. Thank you for supporting the channel! 🙏💪🤘

    • @Romulux
      @Romulux ปีที่แล้ว +1

      Considering you're going to be touching the grip surface a lot, I'd use something meant for that, like grip tape for a tennis racquet or golf club. Then you dont have the potential danger of leeching chemicals from the electrical tape, and the grip is replaceable.

  • @dylanfan7
    @dylanfan7 3 ปีที่แล้ว +5

    I just Subscribed!

  • @memoaxios
    @memoaxios 3 ปีที่แล้ว +1

    Hombre excelente idea 😉 . Inteligente como tú dices
    Men excellent idea, so claver, has You Say. 😜
    Thanks a lot / muchas gracias.

    • @DesignBuildLift
      @DesignBuildLift  3 ปีที่แล้ว +1

      ¡Gracias mi amigo! ¡Aprecio mucho eso! Thank you, my friend! I appreciate that very much!

  • @QKVCS
    @QKVCS ปีที่แล้ว +2

    Awewome !

    • @DesignBuildLift
      @DesignBuildLift  ปีที่แล้ว +1

      Thank You for your support!!!!!

    • @QKVCS
      @QKVCS ปีที่แล้ว +2

      @@DesignBuildLift I think somebody should make a solid proffesional machined version because the Idea of having an assymetrical flat bottom DB is awesome in itself. I am not sure I would even trust red loctite on the flange side with 100+ pounds over my face! I want a one piece machined solif or welded like a LOADING PIN, which are pretty cheap but I would want 18" at least. Good Work Man!

  • @miltonjimenez7312
    @miltonjimenez7312 2 ปีที่แล้ว

    How quickly will they rust? And is there a way to prevent them from rusting like some type of paint ?

    • @DesignBuildLift
      @DesignBuildLift  2 ปีที่แล้ว

      Rustoleum spray paint can prevent the plates from getting rusty. For nipples and other hardware, buy “galvanized” versions (not “black iron”) from your hardware store and you will never have to worry about rust.

  • @HughLeFitness
    @HughLeFitness 7 หลายเดือนก่อน

    Do you think there’s a way to DIY Pepin/Baadass dumbbells? Is there a way to use a 1 inch drill bit and drill a metal dumbbell handle so that you can spin 1-inch acme rods in? For the end posts, we can cut the spinlock dumbbells handles and use as acme rods to screw into the handles? We can maybe weld the flanges too. Sadly, I don’t have access to a metal shop to weld or cut metal…

    • @DesignBuildLift
      @DesignBuildLift  7 หลายเดือนก่อน

      Sadly I have no metal shop /welding skills either 😢

  • @thecoolguy365
    @thecoolguy365 2 ปีที่แล้ว +1

    Where you get the 10lb plates. That's a great dumbell creation.

    • @DesignBuildLift
      @DesignBuildLift  2 ปีที่แล้ว

      Thank you for supporting the channel! I really appreciate it! I bought the large majority or my weights second hand via Facebook Marketplace or OfferUp 💪🙏🤘

  • @anthonyanthony284
    @anthonyanthony284 ปีที่แล้ว

    Two questions, firstly since the handle's hole are bigger than the bar in the middle significantky, does it rattle when lifting? Second, when using heavier weights, does the clamp really hold tight?

    • @DesignBuildLift
      @DesignBuildLift  ปีที่แล้ว +1

      Since the 1” handles fit easily on the 1/2” nipple (Fact: 1” handles will not fit on 3/4” nipples), this also means that the handles do slightly “move” while exercising (i.e., there is a “click” when conducting movements). If you have a good spring clamp the plates shouldn’t move. All this being said, obviously store bought solutions are generally going to outperform this hack in most ways. For more details: diyfitnessclub.com/projects/blog-post-title-one-k9zas

  • @tylershine3012
    @tylershine3012 2 ปีที่แล้ว +1

    Awsome idea, do u know where I can get the plates at thanks!

    • @DesignBuildLift
      @DesignBuildLift  2 ปีที่แล้ว

      Thank you!!! I appreciate it! Not sure what country you are in, but if in the USA- Your best bet is to buy used plates from Facebook Marketplace, Craig’sList, or OfferUp. Alternatively, you can buy some new plates via my Amazon Affiliate link: amzn.to/3FsPJVF

    • @tylershine3012
      @tylershine3012 2 ปีที่แล้ว +1

      @@DesignBuildLift Thank you so much!

  • @johndrapeau
    @johndrapeau ปีที่แล้ว

    Maybe i missed something, but the threads on end of handles.
    , who put them there?

    • @DesignBuildLift
      @DesignBuildLift  ปีที่แล้ว

      These plumbing nipples are purchased from big box USA Hardware stores with the threads already on them. Of course you could cut/thread the pipe yourself,too! Thank You for supporting the channel! I appreciate it! 🤘🙏💪

  • @raptorsrule4
    @raptorsrule4 2 ปีที่แล้ว +1

    Could I just add the flange to a regular spindle dumbbell?

    • @DesignBuildLift
      @DesignBuildLift  2 ปีที่แล้ว

      No. The threading is not compatible with one another.

    • @michaelkulman7095
      @michaelkulman7095 6 หลายเดือนก่อน +1

      I have seen people take an extra spinlock "nut" and put it at bar's end to get a flat surface and some cover the hole by welding a piece of metal onto it or a small plate off center or a large washer off center.
      Also I've seen someone sandwich wood around a spin collar.
      All ways to try and make spinlock dumbbells have one flat end.
      All those seem to work but they aren't so pretty...

  • @emmanuelhud1
    @emmanuelhud1 9 หลายเดือนก่อน

    I know this video is old. But hopefully, I'll get a response. Here in the UK, we have 1/2" and also 3/4" even 1". Why did you use 1/2"?
    Wouldn't it be better to use a bar/tube that is a tight fit for the weight plate hole? So it doesn't move as much. I understand it will make the grip girth bigger, but isn't that why you put the pvc in there ?
    What do you think?

    • @DesignBuildLift
      @DesignBuildLift  9 หลายเดือนก่อน

      Hello! More details here: diyfitnessclub.com/projects/blog-post-title-one-k9zas
      However, here is something missing from that article: not all my 1” hole plates would fit on 3/4” nipples - because most 3/4” nipples have an ACTUAL width of slightly larger than 1” ). This was a primary reason. However, you should use whatever works for you. Cheers!
      To see the demonstration of them not fitting, watch this video here: th-cam.com/video/7jr7ljGdM1Q/w-d-xo.htmlsi=V4uEPirn0mD4z8AK
      Go to 2:14 of that video. 🤘🙏💪

  • @tobikramschuster645
    @tobikramschuster645 2 ปีที่แล้ว +1

    Love the idea. But why 1/2 inch and not 3/4 inch pipe? Because 3/4 inch pipe has less space between the plates :)

    • @DesignBuildLift
      @DesignBuildLift  2 ปีที่แล้ว

      True - most 1” plates would fit tighter on 3/4” nipples. However, many of my plates did not fit on 3/4. Most of my York plates especially were too tight. Cap and Sports Authority plates mostly fit. Anyways- this is why I primarily chose 1/2” nipples for the video. Of course - I encourage everyone to customize these projects to best suit their needs. Thank you for your support! 🙏

    • @DesignBuildLift
      @DesignBuildLift  2 ปีที่แล้ว

      Go to 1:59 of the video linked below for a demo of me attempting to put my plates on 3/4”
      th-cam.com/video/7jr7ljGdM1Q/w-d-xo.html

  • @warmachinebodybuilding
    @warmachinebodybuilding 2 ปีที่แล้ว +1

    Great video bro and super like by Warmachine bodybuilding of garage Gym italy

  • @SupDown4u
    @SupDown4u 2 ปีที่แล้ว

    Good idea as you have good ideas but for poor man and I not poor lol unless you want multiple dumbbells you still need multiple 10 lbs the adjustable dumbbell bars work great but I get it thanks for the tip

    • @DesignBuildLift
      @DesignBuildLift  2 ปีที่แล้ว

      Thank you for supporting the channel! 💪🤘🙏

  • @tylermoran1826
    @tylermoran1826 ปีที่แล้ว

    What do you think the max weight the pipe nipples can hold? If I were to slide a steel rod inside the pipe could they hold more?

    • @DesignBuildLift
      @DesignBuildLift  ปีที่แล้ว +2

      Good question. I put 145 LBS on a 18” plumbing Nipple. Didn’t flex at all. Strong enough as is. 🤘🙏💪

    • @eyaadkhushizafar8034
      @eyaadkhushizafar8034 ปีที่แล้ว +1

      @@DesignBuildLift i use 490 pounds each dumbbells' for my exercise and for big exercise like dumbbells' benchpress i use upwards of 500- 850 pounds or even for a 1 rep i use 1500-2000 pounds . So do you think it can hold that much

    • @DesignBuildLift
      @DesignBuildLift  ปีที่แล้ว

      @@eyaadkhushizafar8034 2000 pounds? Wow that is a world record!

  • @kabukiQUE
    @kabukiQUE 9 วันที่ผ่านมา

    Hello, has anyone experienced any issues with these yet? I’m afraid of things breaking

    • @DesignBuildLift
      @DesignBuildLift  9 วันที่ผ่านมา

      Not that I am aware of…but it’s always a possibility when it comes to DIY gym equipment. If concerned- buy - don’t DIY.🤘

  • @bigdogkropp
    @bigdogkropp ปีที่แล้ว

    PVC pipe inside a metal pipe (for durability) with PVC flanges would be easier to measure to exact length and assemble and would be less costly. Not sure if PVC would withstand dropping the dumbbells without cracking.

    • @DesignBuildLift
      @DesignBuildLift  ปีที่แล้ว

      Thank you, Mike! 🤘💪🙏My opinion: I am not sure PVC could handle heavier increments, and I fear the weights would fall off the ends (even with PVC caps) which could be dangerous. However, this might work for lighter weight increments.

  • @goldmanasable
    @goldmanasable ปีที่แล้ว

    Curious why no just do flanges on both ends

    • @DesignBuildLift
      @DesignBuildLift  ปีที่แล้ว +1

      Great question! You certainly can do it that way, too. However, I found that when trying to unscrew the top flange, the entire nipple would turn and the bottom flange would be the flange that gets unscrewed. In other words, turning the top flange would unscrew the bottom flange. As a result- this was not ideal for what is supposed to be a quick-change design. In my opinion, having two floor flanges works better for more “permanent” dumbbells (not “quickly adjustable” ones).
      Thank you for supporting the channel! I appreciate it! 🤘🙏💪

    • @goldmanasable
      @goldmanasable ปีที่แล้ว

      @@DesignBuildLift thanks love the channel and you're work

  • @littleBrownDwarf
    @littleBrownDwarf ปีที่แล้ว

    A pipe cutter would probably be the cleanest way to get a nice clean, square cut on the EMT conduit, rather than sawing.

  • @bigdogkropp
    @bigdogkropp ปีที่แล้ว

    Baseball Bat tape would give more handle grip.

  • @Blockhead_teda
    @Blockhead_teda ปีที่แล้ว +1

    Fuck yea

  • @luciankristov6436
    @luciankristov6436 2 ปีที่แล้ว +1

    Fuckin wwights are ridiculously expensive. Easy hack thanks

    • @DesignBuildLift
      @DesignBuildLift  2 ปีที่แล้ว

      Thank you for supporting the channel!!!!

  • @edgardvillar2231
    @edgardvillar2231 2 ปีที่แล้ว +1

    so,, you're man,, lifting 60 kilos per hand??? 😳😳😳

    • @DesignBuildLift
      @DesignBuildLift  2 ปีที่แล้ว

      60 LBS…. 60 Kg- I wish!

    • @edgardvillar2231
      @edgardvillar2231 2 ปีที่แล้ว

      Is an awesome weight anyway..In only one hand!!!I wish 60 lbs