In today video, I will be unboxing, building, review, test and giving you my conclusion on the latest launch on Yokomo drift kit, YD-2 ZX drift chassis. I made this series is for people that want to start RC and don't know which kit to buy. I hope my information helps. Don't forget to press the subscribe button, turn on your notification post so you won't miss any videos I make and leave a like if you think this video is helpful. Note: - I will not be bias towards one particular brand. I will make sure that if a chassis brand pass the grade list for everyone to enjoy. Hope this helps.
Thank you bro. Hope you enjoy the video too. I akan buat lagi banyak video untuk chassis yg best budget. So far kalau best budget is Usukani NGE and Sakura D5.
I would have to disagree. I love how the ZX drives. I do also have a MC-1 with all Reve D options available. I wouldn’t say the MC-1 drives that much better than my ZX. Besides my MC-1 was an SX3 that I converted to an MC-1
Thank you for tuning in my channel. Please don't misunderstand me. I dint say it's a bad kit or worst than MC-1. I am saying MC-1 for me with the same proper tuning I have been realizing that the performance of the MC-1 is much better than the Yokomo kit that's all. With all chassis, any tuning done, will be super fun to play. For me, my MC-1 has been performing in all competitions I join. Especially in best 4 most of the time or even finals. Result shown facts actually. I am just saying.
Any low profile servo will fit you don’t have to use a Yokomo I put a Futaba in mine. It doesn’t come with the rear ESC amount because the ESC on this chassis not not supposed to go in the rear due to the quick change gearbox. If you don’t have a Yokomo chassis I would recommend it. It drifts great. Here in the United States fully hopped up chassis it’s right at $1000. Which is right at the same price as a rev D chassis or a fully built MST chassis.
Hello. Thank you for tuning into my video and channel. I am afraid not. It's only can use low profile servo. Overall it a good kit but just some fine tuning can make it fine.
What's the diffrernt between place the motor on the MC1 motor position and the lowest position? Because you know Z gearbox give you opportunity to do it
Thank you for you comments. Overall I would recommend the ZX because its the latest kit from Yokomo. But the cost of hop up parts its abit pricey. I would recommend to use Rêve D hop up parts for more easy and performance. It's worth much more in bucks.
![สาวเมืองเพชร - ธีเดช ทองอภิชาติ [Official MV]](http://i.ytimg.com/vi/kEt7F9PvO3I/mqdefault.jpg)
In today video, I will be unboxing, building, review, test and giving you my conclusion on the latest launch on Yokomo drift kit, YD-2 ZX drift chassis. I made this series is for people that want to start RC and don't know which kit to buy. I hope my information helps. Don't forget to press the subscribe button, turn on your notification post so you won't miss any videos I make and leave a like if you think this video is helpful.
Note: -
I will not be bias towards one particular brand. I will make sure that if a chassis brand pass the grade list for everyone to enjoy. Hope this helps.
Like this review,,good info thanks bro ❤❤❤
Terbaik bro...memang cari review macam ni. Good kit tapi harga pricey. I still survey new kit for rc drift...👍👍👍
Thank you bro. Hope you enjoy the video too. I akan buat lagi banyak video untuk chassis yg best budget. So far kalau best budget is Usukani NGE and Sakura D5.
What turnbuckle/lower a-arm did you get?
Where do you get your colored hardware? (Screws)
Nice review! Definitely subscribed! If possible you could do tutorial on Steering angle and Ackermann.
Yes, I can do so. I will make a video soon. Thank you so much for your request.
I would have to disagree. I love how the ZX drives. I do also have a MC-1 with all Reve D options available. I wouldn’t say the MC-1 drives that much better than my ZX. Besides my MC-1 was an SX3 that I converted to an MC-1
Thank you for tuning in my channel. Please don't misunderstand me. I dint say it's a bad kit or worst than MC-1. I am saying MC-1 for me with the same proper tuning I have been realizing that the performance of the MC-1 is much better than the Yokomo kit that's all. With all chassis, any tuning done, will be super fun to play. For me, my MC-1 has been performing in all competitions I join. Especially in best 4 most of the time or even finals. Result shown facts actually. I am just saying.
Any low profile servo will fit you don’t have to use a Yokomo I put a Futaba in mine. It doesn’t come with the rear ESC amount because the ESC on this chassis not not supposed to go in the rear due to the quick change gearbox. If you don’t have a Yokomo chassis I would recommend it. It drifts great. Here in the United States fully hopped up chassis it’s right at $1000. Which is right at the same price as a rev D chassis or a fully built MST chassis.
which drift setup did you choose? can you share with me? i search a better setup.
Hey Nick! By any chance do you guys sell those screws online? I would like to grab a couple sets for my MC-1, and YD2S!
yea was tryna find em online but couldn't
Hi, just wanted to know that is the zx customisable to use reved servo in any way?
Hello. Thank you for tuning into my video and channel. I am afraid not. It's only can use low profile servo. Overall it a good kit but just some fine tuning can make it fine.
Is this also true for a yd-2z?
@@snackattack2079 don't think so
@@NickLimVlogs
Hi, Is it possible to build the servo the other way around, turned upside down? so that the reved servo fits?
What's the diffrernt between place the motor on the MC1 motor position and the lowest position? Because you know Z gearbox give you opportunity to do it
hi love this video. quick question.I am a first time yokomo buyer, im confused what to get, SXIII, RX or ZX? is the ZX worth the extra bucks?
Thank you for you comments. Overall I would recommend the ZX because its the latest kit from Yokomo. But the cost of hop up parts its abit pricey. I would recommend to use Rêve D hop up parts for more easy and performance. It's worth much more in bucks.
Have you given it another try? Maybe a new setup?
Why the esc at the back ???😉
where buy screw hex red colour set bro?
Great Series! Hope to see more reviews. Usukani NGE perhaps?
If you do request, I will make it for the next episode. Thanks for your comment. Appreciate it very much.
Carbon fiber cant bend permanently
Do you even know what the word “biased” stands for? 😂 used wrong btw…
“biased” : unfairly prejudiced for or against someone or something.