Obviously, this is not a commercially produced die. It is a very nicely made custom die intended to duplicate a standard JSB pellet shape in 30 Cal. Its nicest feature is that it doesn't use bolts to hold it together, but a tightly fitting steel ring. This makes it much quicker to disassemble and remove the pellets. Die material is stamped on the side, SKD 11, a high carbon, shock resistant, rust resistant die steel. The 12% chrome content officially makes it a stainless steel. Over all, nicely done. And yes, the music... is a distraction.
Good night friend. I would like to know where you got it because I'm interested in purchasing a mold like that? If you can let me know where you bought it I would be very grateful.
BC isn't as useful as you would think. You can't trust the BC manufacturers give you, because BC is velocity dependent, meaning your projectile has not just a different BC for each individual airgun, but it's BC changes in flight. It's much better to use real world data. That's why I use an application called Scopeknob, made by Eric Sanders. It uses something called velocity retention factor, which involves you chronographing at the muzzle and then at 10 yards and then dividing the 10 yard velocity by the muzzle velocity, resulting in a figure of less than 1. It's arbitrary, but it doesn't matter if you always use the same procedure. That along with your scope height, velocity, ect will give a pretty good approximation of pellet trajectory. You then take that data to the range, zero at your optimal zero, and then shoot at a close range and a far range, noting how many clicks away from your zero you are on each, compared to what the calculated trajectory is. You then plug the real world numbers into Scopeknob again, and it adjusts everything to line up with the real world data, using the theoretical data as a starting point. Once there, it prints out a tape you can wrap around your elevation turret that has all the distances marked. I've shot field target with this, and hunted with it, and it works.
By the way, the best way to find BC, if you need it, is to calculate it yourself using real world data. I just started using VRF instead because of Scopeknob.
@@ldkdjhshhdd6269 tem zap ?I cant find anything on buying one. Is there a link ... to buy one. I would like to mold the those pellets like the jsb .81 grain .357 cal
i think there was a reason why my teachers in school did NOT have music playing during their lectures...
Obviously, this is not a commercially produced die. It is a very nicely made custom die intended to duplicate a standard JSB pellet shape in 30 Cal. Its nicest feature is that it doesn't use bolts to hold it together, but a tightly fitting steel ring. This makes it much quicker to disassemble and remove the pellets. Die material is stamped on the side, SKD 11, a high carbon, shock resistant, rust resistant die steel. The 12% chrome content officially makes it a stainless steel. Over all, nicely done. And yes, the music... is a distraction.
Def want one of these. Do you have name of the company who makes these
If you call that music
@@markzimmerman7279 100, % with you
Looks cool! I wish the background music was at a lower volume or off.
Turn that annoying background music off. Soooo annoying, can’t understand anything you’re saying.
I also came here to write this comment
So where does one obtain such a die and press parts? It looks great.
So where does one obtain such a die
Do you have them for .177 ?
Or flathead/wadcutter for all calibers ? 🤔
It will be helpful if you leave the link to purchase the Pellet Press Kit. We all will Thank you.
Thanks for the video, it would be great if you could have add some grouping tests to video
Do you have these ovens for sale?
Hello I want to buy it, how much does it cost? where do they sell it thanks
Hey ivan could you send a link to possibly be able to buy this ??
Hello great job you made the matrix yourself and could you buy something like this in 9mm
Such aggravating music made this video unbearable to finish watching😞
Absolutely. I could only stand 30sec of it.
No music PLEASE !!!!!!
Yes,its disturbing and can't concentrate on what you are explaining
Please give us a link, bro. It's been 2 years and still no link. I really want to set up.
Very cool This way ! How do i add one of these to lime? 5,5 mm?
Hi I just want to know how to get one for myself. Those were great looking pellets
Hi mate how can I get one off your molds and do you do any other sizes tia
Where can you buy that Mol
I'd love to get one off those kits for.30 pellets.. How do I go about buying one
please tell me where to get that set-up & price. i want one! P.S., your rap music goota go! Not all is into rap music & turn down volume!
@@jvewaboi5714 did you find who makes it ?
@@josephpeters2367 amigo Necesito un molde regáleme su número o Escríbame Necesito un molde un mol de 35
@@albertoluisradaoliveros257 espanol I speak English
Bro, how is the pellet you are making made of?❤️👌
Для получения трёх пулек, головняк невероятный
Where can whe buy those molds what is the naam of it
Good night friend. I would like to know where you got it because I'm interested in purchasing a mold like that? If you can let me know where you bought it I would be very grateful.
I would like to buy that pellet maker where I can buy that pls let me know
Cetakan yang sangat rapi, ingin punya juga buat pakai sendiri 👍👍👍
Ivan Once where can i get that .30 cal pellet module i am interested
Did you make this set up.
Where can I buy .177 and .22
I'm interested, where do I buy, who sells these molds?
Are these .30 caliber dies available, and if so how much USD?
Does it make a .50 cal slug for Air Rifle.510 BMG ?
That's all great and dandy but nobody knows ware people can buy them at and how much?????
Hallo Iwan, kann ich dieses Werkzeug bei Dir kaufen, was ist der Preis ?
I want to buy this setup please help me I want buy this
Felicidades q bien quedan, donde consigo esos moldes tienes un link de la página.
hi, where can I get this mould plz?
Where can I get that press? I’d love to have one? How much is it? Is it a money saver?
You and me both 🤣
where can i order this
onde consigo comprar estes moldes por favor?
GOOD DAY I AM INTERESTED IN YOUR MOLDS WHERE I CAN ACQUIRE THEM. AND THE MOST IMPORTANT THING YOU MAKE SHIPMENTS TO MEXICO
Were can you purchase?
Can you provide the BC for the pellet or sulg kit? Trajectory calculators would want that input
BC isn't as useful as you would think. You can't trust the BC manufacturers give you, because BC is velocity dependent, meaning your projectile has not just a different BC for each individual airgun, but it's BC changes in flight. It's much better to use real world data. That's why I use an application called Scopeknob, made by Eric Sanders. It uses something called velocity retention factor, which involves you chronographing at the muzzle and then at 10 yards and then dividing the 10 yard velocity by the muzzle velocity, resulting in a figure of less than 1. It's arbitrary, but it doesn't matter if you always use the same procedure. That along with your scope height, velocity, ect will give a pretty good approximation of pellet trajectory. You then take that data to the range, zero at your optimal zero, and then shoot at a close range and a far range, noting how many clicks away from your zero you are on each, compared to what the calculated trajectory is. You then plug the real world numbers into Scopeknob again, and it adjusts everything to line up with the real world data, using the theoretical data as a starting point. Once there, it prints out a tape you can wrap around your elevation turret that has all the distances marked. I've shot field target with this, and hunted with it, and it works.
By the way, the best way to find BC, if you need it, is to calculate it yourself using real world data. I just started using VRF instead because of Scopeknob.
How much the mold for both 4.5 and 5.5 mm
Very nice but how to buy the set up
Hi friend are you still working?
Señores encontre donde se puede comprar aunque lastimosamente para mi mala suerte parece que no hay envíos a mi pais y a el resto si 😢
Gental man How order this molt ?
Good day do sell the mold in Philippines im interested, just do 22 and 30, and how much it cost in USD? Thanks
No details anywhere to buy this if I wanted to buy how and where would be good can it be purchased and sent to England How much for set
How can I get one of your molds in .25 cal.?
Donde puedo comprar ese molde para calibre .22?
How many pellets can make in 1 hour?
Good Morning Do you sell the mold to Brazil? I'm interested, do it on cal 177 and 22
I want one like this, how do I get it?
please put the info up
i am opening the sales link you provided, but there is no product inside. I want to buy it. could you help me please
how much if I buy that?
How to buy mold
How about the lead wire maker?
Where can I buy one?
Now how a are these pellets?
how about .22? May be 4 cavity?
How much for the set up ?
من اين ممكن الحصول علي هذا القالب
Your Products are out of stock
When they will be available for sale ?
And how to contact you ?
is very good 👍👍👍👍like this
perfeck
How do u get one ????
Price mold?
Do you ship via aliexpress I want to buy? this app of yours is very complicated to make purchases
I can by it Bangladesh?
man how to buy the whole set up
How much
Where can i buy this
Le prix svp merci
Dear where i buy this
Onde eu compro uma forma dessa
А где купить такую пресс форму,или кто изготовитель?кто подскажет?
Price for model
Hello, I would like to buy this product, also in different calibers 4.51, 4.52, 5.52 mm. Is it possible?
Idol ivan, what is the purpose of this video if you’re giving us the link where to buy this mold die.
I'm interested, and vice-versa, who sells these molds?
That's a great question
Tem ZAP
Tem ZAP
@@ldkdjhshhdd6269 tem zap ?I cant find anything on buying one. Is there a link ... to buy one. I would like to mold the those pellets like the jsb .81 grain .357 cal
Hello I want to know if I can make molds for Slug caliber with that and what caliber are they? where can i buy it, thanks friend
Price model
Can not find any on DHgate?
Hola amigo soy de RD donde puedo comprar un molde de eso para 22 5.5
how to buy?
how to get a form like that for making slug pellets?
Buenas amigo usted me podría hacer el favor de venderme el molde gracias espero su respuesta
how can i get one of this
Can give order for this mould?
Vc vende essa forma no calibre 5.5mm de 18grs
Vende?
Απο που μπορω να αγορασω αυτο το εγαλειο
Awesome results 💯🇺🇸💪
Where are these available from?
السلام عليكم ورحمة الله أين أجد هذا القالب
I want one where I can buy
Hello sir how to order that
Can you share the design
Why didn't you provide the name of the pellet maker? My preference is piss on the accompanying music, what is the purpose when talking?
Você vende amigo ?Valor ?
Importa ela para no MercadoLivre amigo para a gente poder comprar
Mercadolivre