Just meet Lenny a couple days ago at the store. He was really nice, came out from the back of the store to do a personal meet and greet, which made this gun enthusiast happy. Sam from the far northwest side of Chicago Thanks Lenny 👍👍
I wish I would have seen this video earlier. Your instruction on how to use a knife when cutting off the tabs was excellent. I had a small accident when cutting off my tabs last week. I accidentally slipped and ended up cutting off my trigger finger. After I heal up I will be learning to shoot with my left hand. Thanks for the great products Mr Lenny
@-@backdraft216; Damn that sucks, not being a smartass or anything like that but wouldn't it be easier/better too use your middle finger for your trigger finger instead of going left handed.? That's going too take a lot of getting use to, not to mention a new holster, whatever works best for you though and good luck. "KEEP ON KEEPIN ON"
The 2 Glocks that really need an upgrade like this are the G43x & 48... Even an extra 2 rounds would be awesome! The Shields Mag Gen 3 still kind of have somewhat of issues when feeding, you guys can get something special going if you guys aim at the 43x & 48.
I don't have a Glock yet but I do have a Canik. I know come after me since I am leaving a comment on the GlockStore youtube channel but, one of these days when I do get a Glock, I am definitely going to Nashville just to go to the store.
I used to use a pair of vice grips to squeeze the sides of the mag in enough for the tabs to clear then pop the baseplate off with a punch through the hole. But I recently picked up some Glock +2 kits from Lenny and an MDT. Much, MUCH easier than the vice grip and punch method.
$50 bucks is really steep. Canik only wants $55 for TTI Combat magazines that come with 21 capacity, and those are space-grade Taran Tactical mags. I just bought two because two or more = free shipping.
$50 ?!?! Glock sells OEM 24 round magazines for less money and it holds more ammo than the extension in the video. This video and product are pointless.
Hey Lenny! Always enjoy your videos. Have for many years. I'm curious---which Spyderco knife did you use in this video? I love my Spyderco knives. Just wondered which one you're using here. Thanks!
Why? You can buy an OEM Glock 24 round magazine for cheaper. The extension in the video holds less rounds and is more expensive. This product is pointless.
The older mags don’t have the cutout for the mag release if it’s setup for a lefty mag release, newer mags have the cutout for the mag release on both sides
I added a plus 3 GS extension to my glock 48. Had to use the shield 15 rpund mags. These mags ran great before installing the extension. Now they won't run well at all. Video incoming.
Does the gold look like the one in the video for 9mm? This looks more like a Cerakote gold & the websites Gold looks alot more orange? Liking the one in the video alot more to match my TiN barrel
Hi Lenny, my Gen 2 G19 mag did not fir my Gen 4 G19. The mag release button for some reason was different and would not hold the mag. As a matter of fact, the mag would not even allow a round to be loaded
Idk what I’m doing wrong but I bought the same product but I can’t get the follower on the spring and when I put the spring in the mag it rubs the sides of the mag it’s like they stuck a to big of spring in the package
Gen 5 mags are single stocked , so how can gen3/4 mags fit ? When they are doubled stocked. I tried to put a gen 3 9mm mag into my g43x and it does not fit !!
No. They will work on 9mm, .40, and .357 Sig. 10mm and .45 are a different sized magazine. There are other companies that make them in those calibers. SLR Rifleworks and Pearce, just to name a couple.
Glock has a 9mm OEM magazine that holds 24 rounds. There's no point of buying an aftermarket plus 5 extension because you'll only get 22 rounds. I dont understand why anyone would buy this.
I replace all my black followers with the Orange followers. It really lights up the open chamber when checking for a round. 9mm only. Order Glock store # 6307. Glock part no 05233. Just 4.99
Just meet Lenny a couple days ago at the store. He was really nice, came out from the back of the store to do a personal meet and greet, which made this gun enthusiast happy. Sam from the far northwest side of Chicago
Thanks Lenny 👍👍
You are a smooth operator Lenny !
Adding extra rounds to my 9mm Glock mag is always a plus.
I wish I would have seen this video earlier. Your instruction on how to use a knife when cutting off the tabs was excellent. I had a small accident when cutting off my tabs last week. I accidentally slipped and ended up cutting off my trigger finger. After I heal up I will be learning to shoot with my left hand. Thanks for the great products Mr Lenny
@-@backdraft216; Damn that sucks, not being a smartass or anything like that but wouldn't it be easier/better too use your middle finger for your trigger finger instead of going left handed.? That's going too take a lot of getting use to, not to mention a new holster, whatever works best for you though and good luck.
"KEEP ON KEEPIN ON"
Most people would classify that as more than a small accident. What is a large one for you, the end of the world?
I call bs, why would you be cutting with your left hand and cut your right trigger finger off? I hope youre joking atleast, but sounds made up.
The 2 Glocks that really need an upgrade like this are the G43x & 48... Even an extra 2 rounds would be awesome! The Shields Mag Gen 3 still kind of have somewhat of issues when feeding, you guys can get something special going if you guys aim at the 43x & 48.
Try the PSA Micro 15 round mags, you can keep your stock mag release and they work very well...
@@glimtecharms5115be careful I got a micro psa mag and that shit failed few times at the range at this point sticking with the oem 10 rounds
@@glimtecharms5115I second this, 300+ rounds through each of my 2 micro dagger mags and zero problems
They actually have a +4 extension for the 43x/48 now on their site
I’ve always been a fan of the G26, so seeing it with a magazine with 5 extra rounds would be epic.
Can't wait to try this out at the range and see how it performs.
You guys should make a 15 round mag for the Glock 43x original from the Glock store
I’m so THANKFUL this video is back!! ❤
Glad you moved outa Comifornia, now I’ll support your awesome store.
You just broke your own "no ammo in the room" rule Lenny. :)
Lol almost, good try though, I had the same thought. He isn’t working on the gun. The rule is never a firearm and ammo at the same time.
The Lula loaders are great ! Thanks for mentioning them.
I don't have a Glock yet but I do have a Canik. I know come after me since I am leaving a comment on the GlockStore youtube channel but, one of these days when I do get a Glock, I am definitely going to Nashville just to go to the store.
Thank you, Lenny, good presentation.Thank you so much.I'm looking forward but to purchase this one thanks again
Gotta admit I do like that orange follower! Had to convert the base plate to fit my 19x.
The tactical red color is dope with this new accessory.
Another good video. Got to go check out the other colors
I used to use a pair of vice grips to squeeze the sides of the mag in enough for the tabs to clear then pop the baseplate off with a punch through the hole. But I recently picked up some Glock +2 kits from Lenny and an MDT. Much, MUCH easier than the vice grip and punch method.
$50 bucks is really steep. Canik only wants $55 for TTI Combat magazines that come with 21 capacity, and those are space-grade Taran Tactical mags. I just bought two because two or more = free shipping.
$50 ?!?! Glock sells OEM 24 round magazines for less money and it holds more ammo than the extension in the video. This video and product are pointless.
Hey Lenny! Always enjoy your videos. Have for many years. I'm curious---which Spyderco knife did you use in this video? I love my Spyderco knives. Just wondered which one you're using here. Thanks!
Honestly, you had right up until you removed those two tabs permanently. Which means you can no longer use the OEM baseplate. Right?
Add 5 to mag? We call that "California Defiant".
😂
You goddamn right 😂
Or second "amendment compliant"
Why do you think he left
Why add 5 more rounds if you can't hit the target in the 1st 2 rounds then give up
Funny I was JUST TODAY, Looking at these. Guess I need to buy one.
Always enjoy your videos. Informative and fun.
Woot! Something I want for my G17 Gen5.
Why? You can buy an OEM Glock 24 round magazine for cheaper. The extension in the video holds less rounds and is more expensive. This product is pointless.
The older mags don’t have the cutout for the mag release if it’s setup for a lefty mag release, newer mags have the cutout for the mag release on both sides
9:45
So YOU are the guy carrying tip down….
😂😂😂😂
Anyway, I need this mag extension pronto!
Need to have one for the 43x and 48
We do! SKU: 20343 on our website.
Lenny is the best.
I added a plus 3 GS extension to my glock 48. Had to use the shield 15 rpund mags. These mags ran great before installing the extension. Now they won't run well at all. Video incoming.
I have these installed on my duty mags and my comp mags. It says it's +5 for 9mm but I get +6 comfortably with no issue(s).
I wonder if Disabled Veterans gets a discount at the store. I’m going to Nashville in July to the VA hospital and thought I would stop by the store
Available for the 43x magazines?
Yeah i just got one 2 weeks ago for my 48mos
@@aliasjuan910 sweet
Glockstore always tryin' to one-up Canik
Pun intended
Lenny, will you guys create one for the G43X and G48 magazines?
SKU: 20343 on our website
Very cool
Will you guys ever make a + 4/5 for the glock 20 gen5?
Does the gold look like the one in the video for 9mm? This looks more like a Cerakote gold & the websites Gold looks alot more orange? Liking the one in the video alot more to match my TiN barrel
"It's tight the first time" - Lenny Mcgill
Hi Lenny, my Gen 2 G19 mag did not fir my Gen 4 G19. The mag release button for some reason was different and would not hold the mag. As a matter of fact, the mag would not even allow a round to be loaded
So you like the para 3 huh? I have one in maxamet, I love it but love my custom Benchmade more.
Idk what I’m doing wrong but I bought the same product but I can’t get the follower on the spring and when I put the spring in the mag it rubs the sides of the mag it’s like they stuck a to big of spring in the package
Do they work/fit with a magwell?
He demonstrated after the end that they fit their competition and EDC magwells- he said he forgot to mention it in the video.
Will these work with the Stealth Arms Platypus? The Platypus comes with Glock OEM mags but not all extensions work with their magwell.
Mr.magill is the father I never had
when are you guys making them for the 43x? unless you already have them
Very informative
Gen 5 mags are single stocked , so how can gen3/4 mags fit ? When they are doubled stocked. I tried to put a gen 3 9mm mag into my g43x and it does not fit !!
Can u add it on a 10 round magazine or u can’t
Will this work on the 19x?
Is there any for glock 30 gen 5 ?
I wanna see a glock 37 gen 4 video. Nobody has done a proper one 🙄 Where's the 45GAP love Lenny?
The 33 round big stick is the same price as the 5 round extension. I don't see the value in the 5 round extensions.
Exactly 💯... also glock now sells a 24 rounder. The extension in this video is pointless.
Where can we get a kydex phone case like the one you have.?
Very coool!!
Nice !!!
Any issues with these not locking back with last round on the new gen 5 glocks
Will it work work with a single stack mag
I really wish you would have made the sides a little more designed instead of just that plain machined line
Will they work for 43x?
Do they have different sized springs for the different sized mags? G17, G19, G26, or a 33rd mag.
Yes.
Will magazines with this mag extention still fit the mag box in USPSA competition?
You should point out that the magazine extension won't work with some mag well's.
Watch the whole video, I go over magwells near the end. 16:52
Do these work for 10mm?
No. They will work on 9mm, .40, and .357 Sig. 10mm and .45 are a different sized magazine. There are other companies that make them in those calibers. SLR Rifleworks and Pearce, just to name a couple.
What about 43x?
Am I to understand a 10 round magazine and a 15 round magazine both have the same mag spring?
If you are referring to restricted state-compliant 10rd mag, then no. Those magazine springs are thinner.
Boom!
With TF no need to remove the tabs.
That screw sticking out is driving me crazy. A shorter screw should be considered
Glock has a 9mm OEM magazine that holds 24 rounds. There's no point of buying an aftermarket plus 5 extension because you'll only get 22 rounds. I dont understand why anyone would buy this.
You know why they don't make that for the G43 Og,not wanted or needed.
Cool
Do you have trucker parking?
There is parking along the road.
🤔 Are they reliable?
Yes! We wouldn't sell them if they weren't.
I have a plus 5 on my g17 mag the magazine runs fine but my follower no longer catches the slide lock does anyone else have this problem
That's what happens when you don't stick with Glock OEM magazines... Just get a 24 rounder from Glock for less money than this pointless extension.
Shipping
Glocks.. so good every single part has been redesigned in the aftermarket.....
Your magazines will fit except for 19x
A Gen 1/ Gen 2 mag will not work with a Gen 5 Glock for a left handed individual!!!
Are these extensions compatible with other magazines? Specifically HK 9vp and HK 45 Compact.
No, they're for Glock magazines.
@@glockstore ok thanks
Shield arms are more reliable.
How about us 10mm guys LoL
Be careful with the accidental slip.😂
Why add 5 more rouds if you cant hit your target with the 1st 2 shots give up
Add 5 rounds to your mag :)
Add 5 rounds to your mag for the cost of a 24rd factory mag :(
Nice, just not in California.
😎
What about .45? Everything nowadays is 9mm this and 9mm that. Not everyone bows down to the 9mm craze lol
I replace all my black followers with the Orange followers. It really lights up the open chamber when checking for a round. 9mm only. Order Glock store # 6307. Glock part no 05233. Just 4.99
Do they work with the Magpul Magazine