@@ZaidAnsari-un5pu both the parts full fills different needs. Bash plate is protecting the coolant reserviour on the other hand engine gaurd have different usefulness
Hi bro, I installed lower engine guard from Triumph service centre. The product cost is 1565 + labour - 165 & gst - 440 } total is around ₹2200 only. There is no separate installation costs.
@@roadrunner2757 that sucks! I was planning to get some accesories during the first service in some days. Now, I'm sweating from learning about the labour cost 😅. Let me see what the SC near me quotes.
@@ronishane they cost Around 3000 because they are Sintered. Understand that standard rate for Sintered brake pads usually ranges from 2500 to 3500rs And there are other options as well but they also cost similar to what triumph is giving
@@rahulraj8328 Lucky you!! This 1770rs i have mentioned is Standard Service center rate. This show how much SVC guys make with just Labour charges. Also to your surprise to Paste Tank & Knee pads on fuel tank they charge 400rs
@@roadrunner2757 i also checked my invoice after this video, they charged 300 with GST for labour. cost of bar is 2170 but 28 percent GST on it brings to 3k. labour cost is less. GST is more.
I am planning to remove the existing crash bar and you are putting more weight on the bike. The handle bar and footpegs take the fall, crash bar is useless.
@@magicbus2308 hi, That is your choice and you have all the rights to do it. Based on my experience Leg Guards do protect and i had few falls where leg guard took the fall. So my suggestion is no harm to retain them.
I asked my area's service centre for oil filter and o rings they instead told me let them register the 2nd service of my vehicle on their system and they'll charge me labour as well as I must buy engine oil.
@@roadrunner2757 ok, i bought some accessories from the counter, i want to install them on my own. iam unable to remove the headlight bezel to install the grille. do u know how?
Good job bhai. Not a fan of adding pipes around the engine, but this is useful for someone who is looking to change.
I'm really confused if i should invest in lower engine bars? I'm thinking getting an aftermarket sump guard would me more useful than getting this
@@ZaidAnsari-un5pu both the parts full fills different needs. Bash plate is protecting the coolant reserviour on the other hand engine gaurd have different usefulness
Hi bro,
I installed lower engine guard from Triumph service centre.
The product cost is 1565 + labour - 165 & gst - 440 } total is around ₹2200 only. There is no separate installation costs.
@@Sid_0016 every dealer is offering them at different price. When you get it installed during bike purchase??
what is the retail cost of lower engine guard? in website its around 2800 rs. u told its 2170. when did u buy this?
@@arijitbhadra1914 yes it is around 2778, i forgot they segregated taxes of 650rs separately
That installation cost is truly very high, is it the same if you get more accessories or they keep piling up labor cost with every added accessory?
@@aritrabasu4366 dont know but they say if accessories are related then less otherwise God knows how much they will. Charge
@@roadrunner2757 that sucks! I was planning to get some accesories during the first service in some days. Now, I'm sweating from learning about the labour cost 😅. Let me see what the SC near me quotes.
@@aritrabasu4366always a better option to check by yourself
Where did u buy front no plate holder?
@@BBty125 checkout the new video on my channel
are there any aftermarket options for front brakepad ....for speed 400 ...stock one cost around 3000 rs ..? 🙄
@@ronishane they cost Around 3000 because they are Sintered. Understand that standard rate for Sintered brake pads usually ranges from 2500 to 3500rs
And there are other options as well but they also cost similar to what triumph is giving
@@roadrunner2757 okk got it ..any upcoming video on sprocket and chain replacement ...? or when to change ?
@@ronishane bhai all running smoothly on my bike not in near 10k kms
Bro they costs only 120 rs for engine guard fitment.. Not 1770 rs.. I got fitted for my bike
@@rahulraj8328 are you sure? Because no way they will charge you 120rs for this amount of work
I have checked and confirmed by others too.
@@roadrunner2757 Yes.. They charged only 120 for fitting during first service.. I have bill
@@rahulraj8328 Lucky you!! This 1770rs i have mentioned is Standard Service center rate. This show how much SVC guys make with just Labour charges. Also to your surprise to Paste Tank & Knee pads on fuel tank they charge 400rs
@@roadrunner2757 i also checked my invoice after this video, they charged 300 with GST for labour. cost of bar is 2170 but 28 percent GST on it brings to 3k. labour cost is less. GST is more.
I am planning to remove the existing crash bar and you are putting more weight on the bike. The handle bar and footpegs take the fall, crash bar is useless.
@@magicbus2308 hi,
That is your choice and you have all the rights to do it.
Based on my experience Leg Guards do protect and i had few falls where leg guard took the fall. So my suggestion is no harm to retain them.
Here they dont even bother to sell parts on counter lol😮
@@ANIK5261 yes this i heared that many centers are not doing counter selling. Luckily Delhi's One Triumph is not that stubborn.
they do. just complant in triumph regarding the labour cost.
I asked my area's service centre for oil filter and o rings they instead told me let them register the 2nd service of my vehicle on their system and they'll charge me labour as well as I must buy engine oil.
@@ZaidAnsari-un5pu gen ktm of pulser ns 200's oil filter. it uses same oil filter. i have changed my engine oil at home.
That's why they are charging 1800, which include equipment and labour.
@@kumarmithilesh1886 but still 1800 is high.
not labour, GST on spare parts is high, @28%
@@2wheeledcompanion they charge 400rs to stick the tank and knee pads plus gst on 400rs also
@@roadrunner2757 ok, i bought some accessories from the counter, i want to install them on my own. iam unable to remove the headlight bezel to install the grille. do u know how?