Stryfe Vector Kit Installation & Review
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- Another review! Love this kit!
Banggood.com
goo.gl/K1igsk
goo.gl/ddgrV8
Facebook Page:
CaptainXavier
Mailing Address:
Chaylo Laurino
P.O. Box 111515
Tacoma, Wa 98411
Theme song source: archive.org/de...
Alterations: spliced.
Time Lapse
Soft and Furious
"You are Shining"
That intro was hysterical!!! 😂😂😂
:)
No loot for you!!!!
That bit on the stock connection is actually a small little screw port for those sling mounts you get for super cheap on Ebay. They just screw in, seems pretty convenient for where you like the slings and I'm sure it'll do well.
+Tiger Foam *sigh. Not you too! I say that...in the video...like...30 seconds later...
Oh, oops. Sorry, benefits of watching at 1am. Lol
By not replying to the former comments, does that mean you're uploading another video?!?
You should paint the blaster and body kit to add more orange and you could also cover the screw holes etc. Seems like a project worthy of one of your paint jobs.
Omg the new intros are amazing! Makes my day
I like you Style because you actually do full mod videos
I would suggest a straight grip. And I also believe that when you get the top rail, that a sling mount can be screwed into the rail. I could be wrong. Btw that is for all the vids today
Thanks for all the vids
Worker makes a sling point that threads into the stock right above the “beaver tail” part of the grip
+Wade Petroline ...I know...I even say that...in this video...
I am pretty sure Worker now sells the kit in its entirety, AKA all the parts needed to make a stryfe more into a vector.
you need to add a longer barrel with a flash hider, add a slanted grip, and can you make a stryfe stampede
You need to hot glue the pins for the infill piece at the top, also the grip bit. Those pins work loose. Also the infill bits which take picatinny need Epoxy adding. As they fall out too.
Could you move the select fire switch to the right side filler piece that is supposed to hold rail? Should make it much more lefty friendly.
Dang, that L O N G B O I magazine
Did the vector kit make any mags unusable?
Drums mags. And probably 6rd mags.
No dislikes! Fantastic!!
You should put flip up iron sights, possibly a canted sight set as well if you’re looking to rock the practi-tacticool vibe. :p
Have you or anyone you know done any experimentation with modifying a 25 round drum to work w the vector magwell? I only ask bc the 25 rounder with a FoamBlast spring is a nasty little thing once cleaned and properly lubed. Might not be ideal to carry more than 1-2 drums.. but would be good for suppressive fire and or your first 25-26 rounds so you wouldn’t have to worry about the length of a stick mag getting in the way. Just curious.
I doubt it. Why bother when it only gains you 3 darts over a 22 and you can easily carry lots of 22's? Alternatively...just don't use the vector kit on your squad support weapon.
That being said...it probably would not be that hard to extend the neck on a 25...it would also increase the ammo cap.
Captain Xavier that was kinda my way of thinking.. just elongate the neck.. don’t have a vector kit yet to take measurements.. but I was mostly curious if anyone had attempted this just yet. Between the capacity of the 25 round drum, the fact it’s slightly shorter when hanging out of the bottom of the blaster, and the bonus that FoamBlast sells replacement springs for these things that work awesomely.. that was mostly my motivation for the inquiry. That and I’m yet to find a high cap magazine for the stryfe that has easily sourced replacement springs should you wear a spring out. Being a firearms guy, you replace a mag spring - not the mag. Ya know?
Is that motor cover on thingaverse or did you get it from somewhere?
+Mike Kroll thingiverse. I drop the name and link when I finish the blaster.
Captain Xavier perfect thank you sir. You and a few other have inspired to make my first primary so I am looking forward to the project!
www.thingiverse.com/thing:2418886
Cool! I expect pictures when it is done. Do you have access to a 3D printer?
Captain Xavier for sure I will make a little album. I do not but but if I reach out to friends of friends maybe I can find one.
Are there any other cosmetic kits that you really want?(everyone can answer.)
Liam Boulton An ak, but would love a desert eagle, 1911, no idea if those 2 are possible though.
They have an ak kit for the stryfe, but I don't know about the desert eagle or 1911.
Do you ever sleep buddy? Also, I love the new intros!
Nope, sleep is for the weak. Thanks! I am having fun with them.
Captain Xavier what is this "sleep" of which you speak of? ;)
dragonblaster 10,000 Can you eat it?
Love the vector kit
Rival Hera Vector kit when?
hey captain you should build an attachment that fires earplug bullets as a shotgun
in all honesty, i think the stryfe would look best the same colour as the vector kit. Maybe it's just me, but i think the colours just dont go well together. Orange and black look good, but not with like, both having the same amount. its better to have a lot of black and a little orange, or a lot of orange and a little black. Once i got my vector kit from worker i painted it. I guess its all up to you, though.
Modular-check
Looking fabulous-check
Magazine fed-check
Ready for battle....... i don't know?
Not yet...needs a few more parts.
ok. can't wait!!!!!!
I like just watched the select fire video
I still think banggood should make a FAMAS kit for the Rayven
Love the new intro.
I was wondering is there a what fire kit for swordfish?
"A what fire kit"...what?
@@CaptainXavier a select fire kit
@BenthewildchildE750 anything that works in a Stryfe should work in the Swordfish.
@@CaptainXavier do you know if there is a seller of stock stryfe motors and flywheels? How difficult would it be to have a motor cover that acts like a battery door? I would like an easy way to charge the cage setup for various purposes such as HVZ cage, stock or nerf war. I will have a XT60 on both the cage connection and the battery connection.
@BenthewildchildE750 I do not, no. But another option would be to put a PWM on the flywheels so you can adjust the RPMs.
Can the mega thunder bow take k26??
+Samtbs108 no
My only (And I mean only) possible problem with this is that with the new rails, I don’t think I can put on nerf attachments and need airsoft ones.
That is correct. Although there are piccatinny to Nerf rail adapters.
@@CaptainXavier I’ll have to take a look for that. Thank you kind sir.
You're the kind of guy that inspires me. I have a plan to make a shotgun out of the one Nerf blaster that fires the missiles only. I plan to make missile sized shells that fit in the missile holding stock, because it's built in and I'd rather use it that toss it out. If you could build and give a tutorial, I'd go nuts. I'd really appreciate it.
Bominog nevets01 made an inline clip flywheeled rocket shotgun. Look it up.
i think the screwports on the stock are meant for a slingmount.
+FeuerToifel ...I say that...in this video...
0 dislikes, that's what i like to see!
what kind of 180 motors are those?
They aren't 180s. They are Worker 132's.
Oh sorry I thought they were because of the motor cover
Sadly I don't have the parts you push in to fill in gaps so it looks a bit meh
does it have a suppressor
no
Love the new intros
This is lit.
without that back stock piece, this reminds me of an autopistol from some movie. but i can't seem to remember it.....
David Thompson I think total recall (2012)
I haven't seen the remake other than bits and pieces, but the original i
have and not so sure. But I do think it's no longer a movie.....it
looks like the heavy pistol from the Mass Effect games. Love that
series, even one of the other nerf gun mods i've seen looks like the smg
Locust from the same game set. more from 2 and 3 though
Cool intro
Needed to get an extended mag release
I have one...I jsut forgot to install it. But good call!
Please add a mock suppressor for god sakes!
Someone needs to make a kriss vector kit for the nerf ultra amp and the focus
FREE IS GOOD!
Worker makes an orange full-metal flashhider on Amazon
Yay I’m early!!!!!!
Extended mag release.
good call.
nice
no dislikes!
+Adam VanLeeuwen yet...
No drums could be used with this modkit, huh.
Hello again
hi
Make the motor cover remove able!
I still to this day don't understand this kit and why people love it so much. But hey, some people do.
Gosh I wish people would send me stuff like this. So expensive.
If you end up redoing the motor cover, I've seen one with what I think is picatinny rail printed in on Thingiverse.
www.thingiverse.com/thing:2398509/#files
M I R A
It would be cool to make Nerf trenches
What exactly is the difference between a "Nerf Trench" and a regular trench?
Captain Xavier A nerf trench is only decorated on one side.
Nwrf
Like
XD teeheehee
I think that you should name this stryfe something along the lines of ...free... because it represents America, how you got it, and what can be done in wars without having to spend 100s of $
Hi
Stickers, stickers adults call them decals
Decals are different than stickers. These are stickers.
I want loot!
Hi I made a vector Stryfe video
Nerf is awesome anyone who opposes Will Die Painfully By Nerf and Rival ammo
Plasma Ghost yes death to the nerf haters
Rival is nerf!
Dat Guy they’re different types of ammo tho
Than say "Darts and Rival". They both fall under nerf.
Mostly rival rounds
hi
hi
What motors is in the stryfe?
Worker motors can run on IMRs?
+UltimateIron they are apparently designed to.
Thanks a lot, Cap!
Hi
hi