Seeing that offset in the pipe reminded me of a story that my great grandfather told me years ago. Seems there were these two brothers Otis and Virgil, they were bridge builders and in 1872 they both bid to build a bridge across the Hogenpass River in upstate East Westerville. Otis started on the north bank and Virgil started on the south bank and well you can guess what happened. The bridge became the Jogenpass bridge on the Hogenpass River. In 1911 Charles Gates founded the Gates Corporation and in 1921 he and his wife took a trip to East Westerville to visit some friends. When they crossed over the Hogenpass river and saw the Jogenpass bridge. It gave Charles the idea for the Gates 36094 offset rubber union. It's very rare and you don't see to many of them any more. Great job on the jogenpass union for the fire truck .
Great work! If your're looking to grow your channel more, I might suggest waiting a couple days inbetween posting videos to try to even out the TH-cam algorithm. Love the content though! It's alway fun to run some downhill pipe!
When you are threading pipe the pipe dies can be adjusted. Typically it's a good idea to thread on an elbow and aim for 3 1/2 turns or less by hand and adjust the die accordingly. I would say those threads were cut poorly or they were worn out. Sometimes you can get away with it by wrapping it with thread tape, but it looks like those threads are pretty bad. Either way you did a good job for what you had to work with as always!
👍👍👍👍👍 Thumb action on the wrench is one to remember!!
That was definitely a mess before you started. That's a rather complicated repair to get right, & you made it look easy- Great job!
You made that look easy....id fill the scrab bin up a time or 2 before i ever got that right. Great stuff. Cheers
That cat isn't loved much, kinda like my dog. love your videos & your sense of humor, I keep looking for the next one.
Excellent fitting skills hands down very talented
Cheers from Nova Scotia
Slick pipe job. Most definitely better than the hose clamp setup.
Seeing that offset in the pipe reminded me of a story that my great grandfather told me years ago.
Seems there were these two brothers Otis and Virgil, they were bridge builders and in 1872 they both bid to build a bridge across the Hogenpass River in upstate East Westerville. Otis started on the north bank and Virgil started on the south bank and well you can guess what happened. The bridge became the Jogenpass bridge on the Hogenpass River.
In 1911 Charles Gates founded the Gates Corporation and in 1921 he and his wife took a trip to East Westerville to visit some friends. When they crossed over the Hogenpass river and saw the Jogenpass bridge. It gave Charles the idea for the Gates 36094 offset rubber union. It's very rare and you don't see to many of them any more.
Great job on the jogenpass union for the fire truck .
well done,
Don't forget to subscribe to my channel and hit the notifications bell for more videos and reviews
Another great video Clayton ! Enjoyed seeing the thought process and Ms. Diane . I'm a little worried about the boys at the fire house ?
Black iron??? What happened to galvanized????
Hold on to that Nelly CD so you can make a youtube solar panel, lol.
Great work! If your're looking to grow your channel more, I might suggest waiting a couple days inbetween posting videos to try to even out the TH-cam algorithm. Love the content though! It's alway fun to run some downhill pipe!
When you are threading pipe the pipe dies can be adjusted. Typically it's a good idea to thread on an elbow and aim for 3 1/2 turns or less by hand and adjust the die accordingly. I would say those threads were cut poorly or they were worn out. Sometimes you can get away with it by wrapping it with thread tape, but it looks like those threads are pretty bad. Either way you did a good job for what you had to work with as always!
Thanks 👍
Man you can really put down some nice welds I’m just so interested in watching ya work 👍🏻
Awesome video! So much good information, thanks!
A lot of skill and experience, thank you 😊
Great job! You made all the angles look simple.
sweet
Great Job!! I like the way you figured out the angles of the cuts!! (Paint??😁)
I painted it gloss black with a small roller...didn't include that in the vid but I did paint it
skill and experience
Really great job. As I have said before your head is more than a dew rag holder.
Thank you
Amazing
👍
👍
It will be fun to see if anyone admits listening to Nelly 😆👏🏼
do not overthink the problem?
I don’t understand the question well enough to offer an answer…sorry
music from stranger things?
Nelly, lol!
You metal manipulator!