Electrical Install for Swim Spa Hot Tub Combo

แชร์
ฝัง
  • เผยแพร่เมื่อ 1 ม.ค. 2025

ความคิดเห็น •

  • @patricklaw9951
    @patricklaw9951 3 ปีที่แล้ว +5

    The white wire from the hot tub (common) going to the GFCI. The GFCI usually has a lug with a white dot on it to hook the common up to as if there is a short it goes through the GFCI and trips the breaker.

  • @thatonegamer2709
    @thatonegamer2709 6 หลายเดือนก่อน

    How much does this type of work go for an outside above jacuzzi???

  • @RH421939
    @RH421939 4 หลายเดือนก่อน

    Romex should not be sleeved in seal tight or pvc outdoors . Should be thhn or uf. Have done it before but have also failed for it before

  • @leonerreuscorne3508
    @leonerreuscorne3508 4 หลายเดือนก่อน

    how can I make the electrical installation on a Swim Spa whit two 50 amp pump. Do I have to run two separate circuit whit two GFCI disconnected box ?? or I can used 1 circuit 1 disconnected box for both pumps. thanks

  • @franciscoramos6769
    @franciscoramos6769 3 ปีที่แล้ว +2

    How much is the cost of all of that?

    • @youtuber-zt1fq
      @youtuber-zt1fq 3 ปีที่แล้ว

      You're looking anywhere from 800-1500

    • @fiddlerpin
      @fiddlerpin 2 ปีที่แล้ว

      I just paid 530.00 for my material which includes 85’ of 6-3 MC 20 ft of rain tight 40 amp gfci with a seimans box and connectors.

  • @johnsteinhagen8455
    @johnsteinhagen8455 3 ปีที่แล้ว +1

    When you entered the side of the hot tub with the seal-tight, did you use a grommet or anything to seal out the outside?

    • @thespaguys5410
      @thespaguys5410  3 ปีที่แล้ว

      No. This tub has a weep hole on the side if water gets in.

  • @nerlymoreno4741
    @nerlymoreno4741 10 หลายเดือนก่อน

    Can the swim hot spat be conect with one box and two breakers gfci

  • @sabinomontoya4679
    @sabinomontoya4679 ปีที่แล้ว

    How much did you charge for this Job The Time and Material for a laborer too?

  • @silasbullard831
    @silasbullard831 2 ปีที่แล้ว

    can you install GFCI breaker in house panel and just put a non fused disconnect outside?

    • @Mike-mn9xo
      @Mike-mn9xo 2 ปีที่แล้ว +1

      Yes. As long as circuit on hot tub side is gfci protected

  • @drflizzz
    @drflizzz 2 ปีที่แล้ว

    Do you have to have a gcfi breaker on the inside of the house too?

  • @GolfinOutdoors
    @GolfinOutdoors 3 ปีที่แล้ว +1

    Is that 4 awg wire?

  • @stephenkennedy6358
    @stephenkennedy6358 2 ปีที่แล้ว +1

    Did you run liquitight from the disconnect all the way underground to the spa.

  • @fiddlerpin
    @fiddlerpin 2 ปีที่แล้ว

    Where do your grounds hook up in the gfci box?

    • @Mike-mn9xo
      @Mike-mn9xo 2 ปีที่แล้ว

      To the ground lug on box itself

  • @georgeakin9312
    @georgeakin9312 2 ปีที่แล้ว

    What size wires did you run to the tub?

  • @Mike-mn9xo
    @Mike-mn9xo 2 ปีที่แล้ว

    I can’t imagine what the electric bill will be on this. Not 1 piece of insulation around that tub or hoses . That thing must lose heat instantly

  • @bertricaldi5104
    @bertricaldi5104 3 ปีที่แล้ว

    where are you located

    • @thespaguys5410
      @thespaguys5410  3 ปีที่แล้ว

      802 Dorland Mill Road, Downingtown, PA 19335