@@shombraewinston9806 If you Google search "JDM engines" you will find there are quit a few distributors. They all seem to be very similar. I purchased mine from Sunshine State JDM.
I also have to remove the transaxle in mine. Im debating if I should remove the transaxle or engine first. I was thinking I could pull the transaxle from the top if the engine was out but I'm not sure if that would be easier 🤔 any thoughts?
@@michaels2251 I haven't tried pulling the tranny out at the same time as the engine. But it should be super easy once the engine is out. Remove the inverter and see what the trans might hit if you come straight up with it. If you try let us know 👍
Hey! I have a question! I recently replaced my timing cover gasket on my 2007 Toyota Prius I put everything back together got it torqued down and when I went to start it all the codes popped up and will not erase 😢 I also cannot drive the car either so I am rly lost and struggling with it right now
@@ValleyMobileAutomotive my speedometer is off the break light and every other light is on, on the dashboard. I did disconnect the service plug before I work on the car then I finished and plugged it back in and that’s when I saw my dashboard and saw everything lit like a Christmas tree 😪 haha tough day
I pretty much got everything out but my engine dont want to seperate from the transmission. I double check triple checked the bolts but it still dont want to seperate…
@@Sic3r Play with how much you are lifting on the engine with the hoist. You may need to lower the engine more or lift up on it more. Also try putting a jack under the transmission and jack up a little to give it support. Let me know how it goes 👍
@@Sic3r Nice! It's a tight fit coming out. When you put the engine in you'll need to play with the angle so the transmission and flywheel splines line up 👍
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
Thank you for this. I appreciate how you explain what the components are.
@@lalosdope Glad this was helpful 🙂
Very impressive wrenching Bro!
Thanks! This was easier than anticipated 👍. The manual says the engine comes out of the bottom but apparently it also comes out of the top 😀
Hello, great video. Can you give more info as to where you got the engine from.
@@shombraewinston9806 If you Google search "JDM engines" you will find there are quit a few distributors. They all seem to be very similar. I purchased mine from Sunshine State JDM.
I also have to remove the transaxle in mine. Im debating if I should remove the transaxle or engine first. I was thinking I could pull the transaxle from the top if the engine was out but I'm not sure if that would be easier 🤔 any thoughts?
@@michaels2251 I haven't tried pulling the tranny out at the same time as the engine. But it should be super easy once the engine is out. Remove the inverter and see what the trans might hit if you come straight up with it. If you try let us know 👍
@@ValleyMobileAutomotivesure will do thanks!
Hey! I have a question! I recently replaced my timing cover gasket on my 2007 Toyota Prius I put everything back together got it torqued down and when I went to start it all the codes popped up and will not erase 😢 I also cannot drive the car either so I am rly lost and struggling with it right now
If you disconnected the hybrid battery make sure the service plug is in all the way. What codes do you have specifically?
@@ValleyMobileAutomotive my speedometer is off the break light and every other light is on, on the dashboard. I did disconnect the service plug before I work on the car then I finished and plugged it back in and that’s when I saw my dashboard and saw everything lit like a Christmas tree 😪 haha tough day
How long did this take from start to finish?
@@michaels3523 Two days... One to remove and the other to install.
Thank you
I pretty much got everything out but my engine dont want to seperate from the transmission. I double check triple checked the bolts but it still dont want to seperate…
@@Sic3r Play with how much you are lifting on the engine with the hoist. You may need to lower the engine more or lift up on it more. Also try putting a jack under the transmission and jack up a little to give it support. Let me know how it goes 👍
@@ValleyMobileAutomotive i have played with it and it took a while but i finally got it to pop off
@@Sic3r Nice! It's a tight fit coming out. When you put the engine in you'll need to play with the angle so the transmission and flywheel splines line up 👍
I'm being quoted five grand for this job at 31 hours of labor That's not including the engine. Obviously it's a ripoff price what should I be paying
@@jason618 They might have their labor time confused. Labor time is 32 hours for overhaul (rebuild) and only 19 hours for replacement.
@@ValleyMobileAutomotive no they're not confused they're trying to screw me I've talked to them I've told them that they're wrong
@@jason618 Then I would recommend getting a quote from another shop.
@@ValleyMobileAutomotive Even if I took it to Toyota themselves I would still save $800 at $195 labor hour. Over what the scam shop just quoted me.
@@ValleyMobileAutomotive final estimate cost given for my engine swap just before I dowed it out of that scam shop $9104.50