Lavochkin La-5 1/48 scale model build, Zvezda 4803.
ฝัง
- เผยแพร่เมื่อ 2 พ.ค. 2020
- Lavochkin La-5 1/48 scale model build, Zvezda 4803.
Over Time by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/ - แนวปฏิบัติและการใช้ชีวิต
Отличная работа. Супер модель, которую вы сделали
Спасибо большое
Спасибо за прекрасную работу 👍🤝
Спасибо
Bardzo ładne wykonanie modelu świetnego samolotu !! Pozdrawiam i dziękuję :).
Согласен брат из Польши, Bardzo Ladnie Zgadzam sie, 🤝😉
Excellent workmanship, enjoyed it 👏
Precise and clean work,beautiful.Nice to see this rather fiddly kit with the panels closed too.
Beautiful job !!! Congratulations !!!
Awesome looking La-5
It's good finish. I'm looking forward to watch the next.
Интересный способ маскировки фонаря самолёта... Надо попробовать будет...
Главное, чтобы нож был острым и переплёт фонаря чётким. Если переплёт замылен не получится.
Excelente video desde Chile abrazo me encanta los aviones el aeromodelismo gran trabajo 👍👍
I have always love these planes, they use to be a regular entrant at Reno that were modified so much. This a very nice presentation of a great plane, well done, love it!!!!
Sounds not quite right to me. There's no air worthy La-5. There's not even any whole La-5s. What you probably saw? could have been a Yak-11? There are quite a few of these around, since they were two-seat trainers and built after WW2. The air racing ones were of course modified to be single seaters. They are similar (to La-5), because these lines of fighters (Yak- and La-) were derived from the same basis, Lagg-3.
Very nice...well done
Perfetni práce v detailech! BRAVO!
Perfect work in details! BRAVO!
Thank you!
Excellent work! So Impressed with your skills and approach.
Thank you
Remarkable sir. The finish was still striking without lots of overplayed weathering. Really like this video. Thank you.
Thanks!
Отлично получилось. Захотел тоже купить эту модель и по вашему видео сделать ее. Спасибо!
Спасибо!
I really like the level of weathering you used. I see so many models that are overdone and look like they've been on the front lines for years. Having something that is close to new looking is just perfect. You have to remember, these planes were delivered from the factory new and there is a point in every planes life where it isn't a worn out, weathered battle queen. I very much enjoyed watching your craftsmanship!
Thank you. I agree with you. The bombers may have had a slightly longer life.
Отлично получилось! У вас прям талант! Я тоже раньше коллекционировал сборные модели авиации!
Спасибо
looking great !
Thanks
beautiful! looks good even without the paint chipping effect.
Thanks!
NICE work! Chipping isn't hard. Just use a Fine brush, use some aluminum, and or silver color. Vallejo , AK, Mig make great metal. colors as does gunze, etc. You got a new sub here, thanks for sharing your work. I just got back in the hobby, after multiple decades away.
Superb! I’m glad you left her almost like new. Not many WWII fighters, nor their pilots, lasted into old age. Don’t get me wrong I like weathering, but some modellers take it too far, especially on aircraft. It’s a beautiful model. Subscribed. Take care.
Thanks, I am agree with you.
красавчик!
Хорошая работа.
Спасибо
@@Fred_SPb Хочу вернуться в стендовый моделизм. После 30 летнего "перерыва"))
Пока просматриваю, набираюсь инфы.
Looks good the way it is. Not much to "chip" on the wooden bird anyway. Very nice job, good looking fighter.
Thanks!
It is a really nice kit and was constructed beautifully , i some times think that Zvezda over engineer there models , theres a lot of the interior you will never see which is a shame .
Yes, but just look in the Tamiya's Spitfire ... or in ICM He-111. Detailed interior is an indicator of the manufacturer's attitude to the model.
Здорово! Но. Самолет стоит на шасси, должен быть выдвинут солдатик - индикатор выхода шасси.
Да, с солдатиками я слажал 🥴 может соберусь с духом, просверлю пару отверстий и поставлю...
Да не мудрено, столько мелкой работы! Это я так, по старой вирпильской привычке бухчу. Кстати, Ла-ФН - самый любимый крафт!!!
Blurry borders are very easy to do with oil paint and brushes.
Love the idea of using pill-packets as a palette , I am now saving mine .What a lovely aircraft she is ,colours look great , great build Aleksandr .😍😍😍 Do you transfer onto matt surface ? use softer/setter ??
Surface is semi-gloss and I use Mr. Setter, it works fine, I have no problem with it.
I like the "sausage" technique that you used for the camouflage paint scheme, the results are great. What advice would you give on what to do, and what not to do, when using this technique? Thanks!
Hi!
What to do: take a fresh "blu tack", the thinner the sausage, the more clear the border between flowers will be, have clean hands, roll the sausages on a clean surface, the dirty "blu tack" does not adhere well to the surface of the model.
What not to do: do not apply paint under the sausage, the paint stream should hit the surface perpendicularly.
It is difficult to apply camouflage with winding borders with sausages, for example, on RAF aircraft, watch the video where I apply camouflage on the Hurricane th-cam.com/video/K8cB0pVVFxo/w-d-xo.html
Beautiful work! What were you brushing on to the model after you put the Tamiya panel line paint on it?
After tamiya wash, I applied a matt varnish
nice one, bit of a weird question but what liquid poly are you using, i am getting into the hobby and dont like the poly cement in a tube that i have, thanks
Do you mean what kind of plastic glue I use? Basically, Mr. Cement S, now there is also Mr. Cement SP, when it is necessary that the glue does not dry immediately I use Tamiya liquid glue with green cap.
@@Fred_SPb thankyou
Maladiets!
Hi there! Beautyfull work! What do you use to make those excellent looking antenna cables? Greetings from France! :)
Thank you. For the antenna, I used 0.12 mm black monofilament for beading.
@@Fred_SPb And the "metal parts" around the edges? TY.
О Лавочка😊да ещё и от Звезды. Наконец увидел какова сейчас Звезда, а то тут на днях посмотрел 3 или 4 сборки Ил-2 и придурел никто щелей не удаляет на стыках от слова совсем. Модельку ещё бы чуток пошоркать, а то как муха не сидела и ей бы цены не было.
Ну новый Ил-2 в 48-м масштабе вообще шпаклевать не нужно если аккуратно собирать. А Ла-5 это старая модель, одна из первых "новых" моделей Звёзды. Не без косяков, конечно, но неплохо.
Шоркать особо не умею пока и чтобы не испортить оставил чистым.
На Як-3 пробовал сколы и т. д.
@@Fred_SPb Да, посмотрел Як-3, песня🙂хорошо получилось
I'm building the LA5-FN now. Readlly fiddly cockpit, some fit issues and flash. Worst of all though is that the FN sprue doesn't include the pieces for the left cockpit wall
I didn't have any particular fit problems. The cockpit is quite normal, of course not like Tamiya, but you can compare it with Hurricane's cockpit from Airfix in 48 scale.
@@Fred_SPb good comparison because I had a lot of problems building that one, too 😂
I don't care that you don't have the skill in chipping. I think it's a fantastic build, and most guys go way too far with the chipping. I like it like this.
Thank you a lot 👍
Hi, ¿anyone can post a video or something else of how to make the antenna cable and the metal part at the edges of it? I ve seen the video completely but no anything about it. TY
The video does not show the process of making the antenna because it is very inconvenient to shoot.
My antennae are made from rubber beaded string. It is thick, but consists of many thin threads glued together. I separate them under a microscope, three or four thin threads give a thickness of about 0.2 - 0.3 mm. After that, I glue the thread on one side into the hole of the desired diameter using superglue. Then I try on the length of the thread, pulling it a little (it's rubber). I cut it off with a small margin and paste it on the other side, pulling it a little so that it does not sag.
The insulators on the antenna are made from a cotton swab stretched over a fire. Then you can cut pieces of the desired length and thread the thread through them before gluing.
I hope I explained clearly.
There are special threads for making antennas on models, but they are not available to me and are too expensive.
You can use 0.1 or 0.2 mm thick fishing line, but it is difficult to tighten and the antenna can be broken.
The part of process you can see here th-cam.com/video/K8cB0pVVFxo/w-d-xo.html
Did you maked the seatbelts or buy them? If you maked them how?
Seatbelts are made of aluminum foil from the lid of a yogurt can. Such foil is colored on one side and the paint adheres well to it. It bends easily. The buckles are made of thin tinned wire and I bent them with tweezers.
@@Fred_SPb Damn that's some great precision dude, Im making the same model it's my first one (don't count the ones I made very young) I'm using brushes and acrylic paints (yamiya and pactra) I know you have to use primer for acrilic paints but do have to paint every single little part with primer (I'm using car primer in spray) so the paint won't come off? I will be using wash and pigments on the model then mat car spray in can.
What acrylic paint will you use? Do a test with paint on a sprue and see how the paint adheres to the plastic. If the paint lays down well and does not peel off the plastic, then every little thing does not need to be primed.
@@Fred_SPb Tamiya and pactra, peel of with nails or itself? Thanks of the answear.
@@LubieOwnic I don't know what pactra is, but tamiya behaves normally, but I would use primer first.
In any case, it is better to do a test painting.
If you want, you can scrape off any paint with your nails.
Sometimes acrylic paint won't adhere well to plastic. Small parts can be primed directly onto the sprue.
А зелёный какая краска?
На 16:36 я показываю краски для камуфляжа. Зелёный - C303.
@@Fred_SPb Благодарю !
Вы случайно не из Новосибирска?
Увы, нет.
Хорошая работа, но озвучка роялем, это полный абзац.
Спасибо.
А рояль... ну пусть будет рояль.
Круто.антена не айс
Да, антенна отстой. Из мононити для бисера. Сейчас делаю из спандекса.
@@Fred_SPb Для меня это пока тоже проблема.нужен совет.Спандекс погуглю.На супер клей делаеете?
@@MsALEXX77 да, аккуратно иголкой. Но я для нити сверлю отверстия. Спандекс - эластичная нить для бисера, состоит из нескольких волокон, я разделяю их, беру прядку из двух - трех волокон.
@@Fred_SPb есть капрон ещё.не пробовали?
@@MsALEXX77 нет, не пробовал.
Здравствуйте с добрым утром из Казани а где 3 ий кот почему он не помогает собирать вам самолёты, а вот бычок молодец он помогает вам собирать
Добрый день. Вы меня с кем-то путаете 🙄