I have 290 miles on mine and decided to just change the oil even though I dont have a filter bc I cant get one anywhere. i have some coming but it looks like it was a good idea to have drained it. So i fill it with 1200 ml and it didnt even register when screwed in. I added another 100 ml and it barely registers when correctly measured. I already have 1300 plus what is in the filter. If I go by the manual I will always be running on low. Should I just fill it until the dip stick is happy?
@@michaelhord when you change or drain the filter it takes more, I always fill it to almost the top line on the dipstick, Start the engine after putting in 1200 Then let the oil settle for 15 mins before adding a little to bring it to the right level, make sure the ground is level before checking 👍
How can u access the dipstick ? 😂😂 is there other way of accessing instead of unscrewing it with your hand ? There is nothing to be shown here,if u cant unscrew the dipstick then u cant open a bottle of water
Just got a used one, oil leaked (1L) out of dipstick hole!!!
Nice video 😊
Trantbold ka rate kitna hai
Center stand????? or hold it up????
Center stand on flat surface
Is normal oil decrease after oil change, around 860 km
What oil do u use ? Try motul 7100
Castrol
This your vedio, is normal oil level. I mean, more than half decrease.
Is this burgman 125 ?
This is burgman 200
Which engine oil is best?
Motul 7100 full synt,no doubt
@@balkanbiker1572 what about shell?
@@rakeshcj3773 I havent used it,if its full synt go for it,but with motul 7100 u cant go wrong! Cheers
@@balkanbiker1572grade 10w40 7100 fully synthetic?
@@rakeshcj3773 yep
The right way, is to check it more often than you, letting it get that low will destroy your valves and rockers,
Mine was in middle (and middle is fine).Thanks for watching 👍🏼
I have 290 miles on mine and decided to just change the oil even though I dont have a filter bc I cant get one anywhere. i have some coming but it looks like it was a good idea to have drained it. So i fill it with 1200 ml and it didnt even register when screwed in. I added another 100 ml and it barely registers when correctly measured. I already have 1300 plus what is in the filter. If I go by the manual I will always be running on low. Should I just fill it until the dip stick is happy?
@@michaelhord when you change or drain the filter it takes more,
I always fill it to almost the top line on the dipstick,
Start the engine after putting in 1200
Then let the oil settle for 15 mins before adding a little to bring it to the right level, make sure the ground is level before checking 👍
No year info? No info about how to get to the dip stick? No info about what oil to use?
This is not about oil,its just the proper way to check your burgman oil level.If ure intrested i use motul 7100 10-40
Not very useful. Does not show how to access the dipstick
How can u access the dipstick ? 😂😂 is there other way of accessing instead of unscrewing it with your hand ? There is nothing to be shown here,if u cant unscrew the dipstick then u cant open a bottle of water
Duh!!!