I bought a house in Miami that came with a 1950's Maytag washer and dryer. They were so old that the exterior looked yellow when it was actually white after some 409 and a few minutes of scrubbing. Those two machines were workhorses. As manual as could be but they never failed. When I listed the house for sale, the couple that bought it demanded that both appliances be included or there deal was off. Now that I have a pair of Maytags from 2023 I miss those old appliances. They were worth their weight in gold.
Failed mainboard, very common in these inverter drive machines. Open top find the serial number of mainboard, search online and order mainboard of same number. Have repaired my machine for $100 by doing this!
A shame the flexwash had to be the brainchild of the ever unreliable Samsung. The fact that yours lasted three years longer than most of them seem to is genuinely impressive. As for the LG, given that they wash differently than other front loaders, I'd love to see its tub clean cycle, if only to see if it's any different than the usual "spin the drum really hard" method.
Yeah that's what happens when a terrible company comes up with a great idea, they ruin it for the rest of us! As for your request, I'll add it to my list!
Story: Plug these into a surge protector when you buy them (even the ones that replaced it)... first thing before using... The board on mine went out in 2007 and it was replaced...plugged into a surge protector and no issues ever since...It may or may not help but defifnitely can't hurt
I bought top loader auto ..I had it 9 months and still under 3 year warrenty.. errors and E1 and checked the pump and outlet pipes ( this was South Afican model defy 8kg * ( beko brands !! Then i got sent new unit 😢Straight out the box the new unit was a lot worse actully 😂!! Just yr issue sounds the same i had on top loader auto almost !!!! I got credit and paid in more money and got the LG Direct drive 7kg front auto.. I am much happier with the LG direct Drive ;)🎉
Hey, dont wanna disturb you but when you were attempting to spin the drum (flexwash) you put it on no spin, so i think you didnt notice, (found this at 1:17 )
@@UliRetz That was intentional. I did that just to demonstrate how the drain pump wasn’t working right. And “No Spin” doesn’t mean that the drum won’t spin, it just means that it won’t go into a high speed spin. It should still tumble during the draining. I wasn’t sure if the problem was motor overheat at that point so I didn’t want it to try a high speed spin, and all other cycles would try filling with water, which considering the drain pump wasn’t working right, I didn’t want to do either.
I’ll add it to the list! Depending on how much longer the cycle is though, I may just do Normal soil, but if it has a significant difference then I’ll do Heavy. And I appreciate the sympathy. It’s sad that it’s an end of an era, but with a new washer we get new opportunities (and in my opinion a better clean) so all worked out in the end!
Had the set for almost 3 years. Absolute junk. Will never ever buy another Samsung appliance. The only thing that they make that is worth anything is phones.
I'll add them both to the list! Someone else also requested the whites cycle so that'll have priority, but I'll try to get to heavy duty as well, though that cycle is over an hour and a half long!
Hey, just wanted to let you know that both of the videos you requested have been complete! Bright Whites: th-cam.com/video/hhf4WbJvn94/w-d-xo.htmlsi=vBm2UUm9X7kz2e6P Heavy Duty: th-cam.com/video/pc4mdxI4BW4/w-d-xo.htmlsi=sobOYgbCIT7XT4HH
Samsung bricking appliances now with firmware updates. My mother in her seventies bought a new Samsung fridge and it would not work unless she connected it to WiFi. The right to repair movement is DEAD.
If your Samsung Flex Wash drum is not spinning and stops mid-cycle, there could be several possible reasons: 1. **Blocked or tangled clothing**: Check to ensure that there are no large items causing the drum to become unbalanced or tangled during the cycle. 2. **Faulty motor**: The motor responsible for spinning the drum could be malfunctioning. If you hear any unusual noises coming from the washer, it could indicate a problem with the motor. 3. **Broken belt or pulley**: If the belt that drives the drum is broken or loose, the drum won't spin properly. Similarly, if a pulley is damaged, it can affect the spinning mechanism. 4. **Issues with the control board**: Problems with the control board or electronic components could cause the washer to stop mid-cycle. This may require professional diagnosis and repair. 5. **Imbalanced load**: Make sure the load inside the washer is distributed evenly. An imbalanced load can cause the drum to stop spinning. 6. **Overheating**: Some washers have built-in safety features that prevent the drum from spinning if it overheats. Check if the washer feels excessively hot to the touch. If basic troubleshooting steps don't resolve the issue, it's best to contact Samsung customer support or a qualified technician for further assistance. They can diagnose the problem accurately and recommend the appropriate solution.
Customer service aee so not helpful. Usually ita all outside the US they are though to read a manuscript and they are allowed to think. Well considering how much money the company is saving to outsource CS to the Philippines or south America for a 10th of the cost
I would buy an LG or ANY OTHER brand over a Samsung.... Samsung is the bottom of the barrel out of all of them....but I do like the way some of their appliances look... that is all
My front load has a control board. It went out in 2007 (2 years after owning it) when the board was replaced, I plugged into a surge protector and here we are 19 years later no issues with the board..
![Best Washer And Dryers 2024 [don’t buy one before watching this]](http://i.ytimg.com/vi/TMGITDYQ8BY/mqdefault.jpg)
Talk about an upgrade! Congratulations, I think you'll love them!
Thanks man! Glad to see you’re still active on the platform!
@@FansOfGames I'm still around! I also have a....slightly more undercover alias....
@@FansOfGamesWhat happened to the Samsung washer and dryer?
@@aidanalmeidaThe main motherboard failed, so he decided to switch. To LG instead of fixing it, prob a better choice anyways
@@SRD124Like what happened to the motherboard?
I bought a house in Miami that came with a 1950's Maytag washer and dryer. They were so old that the exterior looked yellow when it was actually white after some 409 and a few minutes of scrubbing. Those two machines were workhorses. As manual as could be but they never failed. When I listed the house for sale, the couple that bought it demanded that both appliances be included or there deal was off. Now that I have a pair of Maytags from 2023 I miss those old appliances. They were worth their weight in gold.
Oh no Samsung flexwash and flexdry RIP.
Failed mainboard, very common in these inverter drive machines. Open top find the serial number of mainboard, search online and order mainboard of same number. Have repaired my machine for $100 by doing this!
Really hope you enjoy your new washing machine
Will now see new ones. What’s going on with washer dryer.
A shame the flexwash had to be the brainchild of the ever unreliable Samsung. The fact that yours lasted three years longer than most of them seem to is genuinely impressive. As for the LG, given that they wash differently than other front loaders, I'd love to see its tub clean cycle, if only to see if it's any different than the usual "spin the drum really hard" method.
Yeah that's what happens when a terrible company comes up with a great idea, they ruin it for the rest of us! As for your request, I'll add it to my list!
NOOOO I LOVE WATCHING THE TOP LOAD CYCLES *I’m always late in watching the top loader*
Story: Plug these into a surge protector when you buy them (even the ones that replaced it)... first thing before using... The board on mine went out in 2007 and it was replaced...plugged into a surge protector and no issues ever since...It may or may not help but defifnitely can't hurt
I bought top loader auto ..I had it 9 months and still under 3 year warrenty.. errors and E1 and checked the pump and outlet pipes ( this was South Afican model defy 8kg * ( beko brands !!
Then i got sent new unit 😢Straight out the box the new unit was a lot worse actully 😂!! Just yr issue sounds the same i had on top loader auto almost !!!!
I got credit and paid in more money and got the LG Direct drive 7kg front auto..
I am much happier with the LG direct Drive ;)🎉
I will miss the flexwash and flexdry, I wanted to see more videos about them but now they don’t work anymore
Have a flex dryer acting as if door is open I tested door switch leaves no other option then to replace pcb relay board
Hey, dont wanna disturb you but when you were attempting to spin the drum (flexwash) you put it on no spin, so i think you didnt notice, (found this at 1:17 )
@@UliRetz That was intentional. I did that just to demonstrate how the drain pump wasn’t working right. And “No Spin” doesn’t mean that the drum won’t spin, it just means that it won’t go into a high speed spin. It should still tumble during the draining. I wasn’t sure if the problem was motor overheat at that point so I didn’t want it to try a high speed spin, and all other cycles would try filling with water, which considering the drain pump wasn’t working right, I didn’t want to do either.
oh
Could you do bedding with heavy soil?
Sorry about the flexwash breaking down.
I’ll add it to the list! Depending on how much longer the cycle is though, I may just do Normal soil, but if it has a significant difference then I’ll do Heavy. And I appreciate the sympathy. It’s sad that it’s an end of an era, but with a new washer we get new opportunities (and in my opinion a better clean) so all worked out in the end!
@@FansOfGames wash 3 pillows with turbo wash on and use the normal cycle
I got 8 years out of my hi sense 7kg 😢!! I had Lg 6kg that i gave to my brother and you know how old it is ? 18 years old 😅still working ;)
Had the set for almost 3 years. Absolute junk. Will never ever buy another Samsung appliance. The only thing that they make that is worth anything is phones.
did you know you can download cycles to the washer and dryer?
Can you please use the sanitary cycle
This is why you don't buy Samsung, will only last about 2-4 years
My wobble still works
Could you do the bright whites cycle with turbo wash on?
I'll add it to the list!
@@FansOfGames thank you! I am very sorry about your Samsung Flexwash breaking down.
Your request has been complete! The Bright Whites cycle video is now up on the channel: th-cam.com/video/hhf4WbJvn94/w-d-xo.htmlsi=vBm2UUm9X7kz2e6P
@@FansOfGames okay thank you!
I used Samsung for 6 in a restaurant 6 load a day never had an issue
Can u do the towels cycle?
Sure thing, I’ll add it to my list.
are you able to make a video about the self test cycle please and the speed wash with nothing in it and no spin thank you have a good day
Farewell Samsung flexwash and dryer, and I like new lg washing machine and tumble dryer can I request heavy duty full load or bright whites please
I'll add them both to the list! Someone else also requested the whites cycle so that'll have priority, but I'll try to get to heavy duty as well, though that cycle is over an hour and a half long!
Hey, just wanted to let you know that both of the videos you requested have been complete!
Bright Whites: th-cam.com/video/hhf4WbJvn94/w-d-xo.htmlsi=vBm2UUm9X7kz2e6P
Heavy Duty: th-cam.com/video/pc4mdxI4BW4/w-d-xo.htmlsi=sobOYgbCIT7XT4HH
Thank you very much
Samsung bricking appliances now with firmware updates. My mother in her seventies bought a new Samsung fridge and it would not work unless she connected it to WiFi. The right to repair movement is DEAD.
If your Samsung Flex Wash drum is not spinning and stops mid-cycle, there could be several possible reasons:
1. **Blocked or tangled clothing**: Check to ensure that there are no large items causing the drum to become unbalanced or tangled during the cycle.
2. **Faulty motor**: The motor responsible for spinning the drum could be malfunctioning. If you hear any unusual noises coming from the washer, it could indicate a problem with the motor.
3. **Broken belt or pulley**: If the belt that drives the drum is broken or loose, the drum won't spin properly. Similarly, if a pulley is damaged, it can affect the spinning mechanism.
4. **Issues with the control board**: Problems with the control board or electronic components could cause the washer to stop mid-cycle. This may require professional diagnosis and repair.
5. **Imbalanced load**: Make sure the load inside the washer is distributed evenly. An imbalanced load can cause the drum to stop spinning.
6. **Overheating**: Some washers have built-in safety features that prevent the drum from spinning if it overheats. Check if the washer feels excessively hot to the touch.
If basic troubleshooting steps don't resolve the issue, it's best to contact Samsung customer support or a qualified technician for further assistance. They can diagnose the problem accurately and recommend the appropriate solution.
Washer is not working dryer still fine
Dang, you copied my set!!!! Hey, at least I have a pedestal washer now and the AI set at my grandmas new house
Customer service aee so not helpful. Usually ita all outside the US they are though to read a manuscript and they are allowed to think.
Well considering how much money the company is saving to outsource CS to the Philippines or south America for a 10th of the cost
thats samsung for ya... un reliable
It’s not doing it because it’s on no spin
Radio channel please stop insulting me My best washing machine is an LG
Lg is not any better
I would buy an LG or ANY OTHER brand over a Samsung.... Samsung is the bottom of the barrel out of all of them....but I do like the way some of their appliances look... that is all
this is kinda why i don't buy appliances from either samsung or lg.
Samsung sucks don't buy but buy a simple machine five years out of a machine stay of computer you'll be buying another one in 5 years.
My front load has a control board. It went out in 2007 (2 years after owning it) when the board was replaced, I plugged into a surge protector and here we are 19 years later no issues with the board..
I’ve had a Samsung TV for about a decade now and it still works.
@@MetroidMagmoor-629 I don't doubt that....just because they make good TV's or phones doesn't mean they make good appliances
Yalow you can other videos ok @fans of games