Well wish me luck, I got this a week ago, going to try to build it myself tomorrow, Well it's 1/15/24 & I started this morning & just finished it all by myself. I follow the video & it was easy. Thanks Todd's Garage video was on point.
THANK YOU! seriously, thank you so much for this video. I purchased this today and I was so excited to put it together, but when I opened the box the only thing missing were the instructions! This video was a life saver, and 3 hours later, I have a brand new chest! I built it on my own, and it was simple to do it with your instructions, thank you again😊
Thank you soooooo much for your video ….. it is very excellent instruction for a poor & confusing paperwork puzzle by the manufacture. Again, thank you thank you thank you, you are an superior instructor.
THANK YOU!!! Especially the part about putting in the drawers, that was awesome. I missed the back cams on the top of the unit, I had the wrong side in, instead of out, , but I am not taking it apart LOL. It works fine.
Thank u so much for this explanation. I started watching and then went ahead and put mine together. Took me all day and then realized the sides were on the wrong sides. Had to take it apart and swap them. Should have watched the whole video while I was working on this! Would have saved me some time and aggravation! Also my bottom drawer doesn’t line up correctly on one side.. ugh not taking anything apart again
Could the hardware on the side of the cabinet be screwed thru the wrong hole? That would be a super easy thing to do and would account for the misalignment. (otherwise, I'm as confused about that drawer as you are!)
This video was super helpful! So much easier to follow you than the paper instructions. The one thing I did differently is I put the back panels (E) in white side OUT so the unit looks finished on the back too. Also I slid each panel down the slot on the sides and into the bottom channel , then I slid part #12 down both panels. It was just easier which appealed to my naturally lazy self. You do a great instructional video. Next time I need to construct something-- I'm checking to see if you have done it first. :)
Excellent video. As someone who put together about 24 of the square modular units Michaels used to carry, I appreciate the time and effort it takes to do these. But once you have it all together, they look clean and beautiful. I may have to buy one of these! I'll refer to your video if I do!
What are the interior dimensions of each drawer and, assuming the slides aren’t full extension, how much of the drawer pulls out? Thinking about using this to hold spices in the pantry.
Thank you so much for doing this video.I am a visual person and was able to do it all by myself. Just curious I had bag 9 leftover and didn't see it in your video or the instructions. Any idea what they are for?
Baggie #9 contains the connectors for if you choose to stack another unit on top. The white caps pop out. Then you secure the top unit and that's when you will want to attach it to the wall (to keep it from tipping over on anyone. ) The instructions include a teeny tiny note about #9.
My drawers keep getting stuck 3/4 of the way in. I can’t close them all the way. I’m super frustrated as I’ve tried everything and made sure I put all the pieces together correctly. Can someone help me?!
My drawer is stuck! I’ve taken it apart and put it back 3x . 8hrs of working on this ! Any suggestions? I’m so frustrated. The drawer literally will not come out without taking the whole thing apart. Botton drawer is the one I started with. Ugh !
I actually lift it a little and it goes in. I took it apart 3 more times. It still gets stuck. It absolutely horrid at times . I worry sometimes it may NOT close. I will never buy another!
Interior dimensions of the drawer is 29" wide by 13.25" deep(front to back). When fully extended the opening is 10". The top drawers are 2" deep and the bottom ones are 2.75" deep.
I went to put the bottom on and the holes in bottom piece and the sides are too big, you can pull screws out without allen wrench. Do you have any idea how I can attach it, I really don't want to take all this apart to return it.
Hi Melissa and thanks for watching. I am not sure unfortunately. I would contact wherever you purchased it and see if they can assist. I hope you are able to get everything resolved. Thanks again for watching.
Didn't even bother reading the instructions. Just followed you! Thanks!!!
Thank you for posting this video! Everything went together perfectly.
Thank you so much 😊
Thank you
All I can say is THANK YOU, THANI YOU, THANK YOU !!!!!
Thank you so much! You made this so much easier than the instructions.
Omgaaa thank you!!! For explaining how to put shelve on!!! I was struggling lol
Bought this yesterday put it together in a 1.5 hours thanks to this video ❤❤❤
THANK YOU!!!! I just put this drawer set together and finding your video was so helpful to me! Thank you again!
Thank you so much for this video, I purchased one and put it together all by myself!
Well wish me luck, I got this a week ago, going to try to build it myself tomorrow, Well it's 1/15/24 & I started this morning & just finished it all by myself. I follow the video & it was easy. Thanks Todd's Garage video was on point.
Thank you!! Easy to follow. Great job.
THANK YOU! seriously, thank you so much for this video. I purchased this today and I was so excited to put it together, but when I opened the box the only thing missing were the instructions! This video was a life saver, and 3 hours later, I have a brand new chest! I built it on my own, and it was simple to do it with your instructions, thank you again😊
Thanks for a very informative video. You are an excellent teacher.
So so helpful, your clear instructions saved me a lot of time and headache! Thank you!!
Thank you so much! I appreciate the feedback and I am glad the video was helpful!
You made assembly so much easier. Thank you for taking the time to film your assembly 😊
I couldn't get the drawers in but this was a huge help!! Thank you!!
Thank you soooooo much for your video ….. it is very excellent instruction for a poor & confusing paperwork puzzle by the manufacture. Again, thank you thank you thank you, you are an superior instructor.
Thanks for watching, I'm glad this video helped and I appreciate the feedback!
THANK YOU!!! Especially the part about putting in the drawers, that was awesome. I missed the back cams on the top of the unit, I had the wrong side in, instead of out, , but I am not taking it apart LOL. It works fine.
Thanks for watching, I'm glad the video was helpful!
You saved me with this! I couldn’t figure out how to do the top two drawers with just the instructions.
Thanks for watching, I'm glad the video was helpful!
Thank you for making this video. It was very helpful to see the steps to follow and your helpful tips for assembly.
Thanks for watching and I am glad this video was helpful!
Thank u so much for this explanation. I started watching and then went ahead and put mine together. Took me all day and then realized the sides were on the wrong sides. Had to take it apart and swap them. Should have watched the whole video while I was working on this! Would have saved me some time and aggravation!
Also my bottom drawer doesn’t line up correctly on one side.. ugh not taking anything apart again
Could the hardware on the side of the cabinet be screwed thru the wrong hole? That would be a super easy thing to do and would account for the misalignment. (otherwise, I'm as confused about that drawer as you are!)
🎉🎉
This video was super helpful! So much easier to follow you than the paper instructions. The one thing I did differently is I put the back panels (E) in white side OUT so the unit looks finished on the back too. Also I slid each panel down the slot on the sides and into the bottom channel , then I slid part #12 down both panels. It was just easier which appealed to my naturally lazy self. You do a great instructional video. Next time I need to construct something-- I'm checking to see if you have done it first. :)
Excellent video. As someone who put together about 24 of the square modular units Michaels used to carry, I appreciate the time and effort it takes to do these. But once you have it all together, they look clean and beautiful. I may have to buy one of these! I'll refer to your video if I do!
Thanks for watching, I am glad you liked the video! Thanks for the feedback.
$98 on sale right now
@@dianestagg8109where at?
Very helpful to watch....the direction are not as straight forward as your video. Thank you!
Are the drawers deep enough to use as a dresser
How far do the drawers pull out?
What are the interior dimensions of each drawer and, assuming the slides aren’t full extension, how much of the drawer pulls out? Thinking about using this to hold spices in the pantry.
Interior dimensions of the drawer is 29" wide by 13.25" deep(front to back). When fully extended the opening is 10".
I’m going to add some storage cubes on top , if you add storage to yours please let us see , thank you.
Thank you so much for doing this video.I am a visual person and was able to do it all by myself. Just curious I had bag 9 leftover and didn't see it in your video or the instructions. Any idea what they are for?
Baggie #9 contains the connectors for if you choose to stack another unit on top. The white caps pop out. Then you secure the top unit and that's when you will want to attach it to the wall (to keep it from tipping over on anyone. )
The instructions include a teeny tiny note about #9.
I came here to ask the same thing! Thought was going crazy😂
My drawers keep getting stuck 3/4 of the way in. I can’t close them all the way. I’m super frustrated as I’ve tried everything and made sure I put all the pieces together correctly. Can someone help me?!
How tall is it
My drawer is stuck! I’ve taken it apart and put it back 3x . 8hrs of working on this ! Any suggestions? I’m so frustrated. The drawer literally will not come out without taking the whole thing apart. Botton drawer is the one I started with. Ugh !
Did you ever figure it out?! I can’t get mine to go in without force and then it is stuck. I’m about to lose my mind!
I actually lift it a little and it goes in. I took it apart 3 more times. It still gets stuck. It absolutely horrid at times . I worry sometimes it may NOT close. I will never buy another!
What are the inside dimensions of the drawers?? Thank you!
Interior dimensions of the drawer is 29" wide by 13.25" deep(front to back). When fully extended the opening is 10". The top drawers are 2" deep and the bottom ones are 2.75" deep.
My drawers won't go in and I followed step by step I don't know what I did wrong or If the measurement just wrong 😢
I went to put the bottom on and the holes in bottom piece and the sides are too big, you can pull screws out without allen wrench. Do you have any idea how I can attach it, I really don't want to take all this apart to return it.
Hi Melissa and thanks for watching. I am not sure unfortunately. I would contact wherever you purchased it and see if they can assist. I hope you are able to get everything resolved. Thanks again for watching.
Omg thank you for this. Mine came without any directions 🫠