How To Safely Remove Paint Overspray! - Chemical Guys
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Are you having trouble reviving your paints gloss? Does the surface of your ride feel rough and grimy? In today's video, Nick walks us through the proper procedures for identifying and removing paint over spray, contamination, and fallout as well as how to protect the service and prevent future damage. Start by cleaning the vehicle with a wash to remove loose, heavier debris before selecting the appropriate clay bar to extract foreign debris. As the clay bar glides across the surface it will lift and carry fallout away from the paintwork which is a necessary step before paint correction or applications of any coatings to promote the longest lasting bond.
Lock in shine and repel harsh elements with a coat of HydroCharge. Paint may seem smooth to the naked eye, but if you analyze it closely, the surface is actually extremely uneven. Airborne contaminants such as brake dust, rail dust, airplane fallout, pollution, and calcium easily fall into surface imperfections, dulling your shine and bonding to the paint, while sharp fragments can even penetrate the clear coat like a knife! HydroCharge lays down a sacrificial layer of ceramic on top of the irregular surface, leveling it out so the surface is smooth, uniform, and slick, and helping protect your paint from razor-sharp particles. Now, with nowhere to stick, pollution and water just slide right off, leaving behind only a glistening shine that truly stuns!
● ● ● ● ● Products Used in Today's Video ● ● ● ● ●
➜ EcoSmart Waterless Wash and Wax:
www.chemicalgu...
➜ Medium Clay Bar:
www.chemicalgu...
➜ Clay Luber:
www.chemicalgu...
➜ HydroCharge Ceramic Spray Coating:
www.chemicalgu...
➜ Blue Microfiber Applicator Pad:
www.chemicalgu...
➜ Professional Grade Microfiber Towel:
www.chemicalgu...
● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Find a Detail Garage Near You!
● www.chemicalgu...
● Website: www.ChemicalGuys.com
● Subscribe to our channel: www.youtube.co...
● Like Us on Facebook: / chemical-guys-15994943...
● Follow us on Instagram: / chemicalguys
#chemicalguys #detailing #carcare
This stuff is the truth and a life saver. I had my brake calibers apint and when i got my car back overspray was everything i lost my mind. Found this video and the clay bar was a a blessing. I highly recommend
Enjoy your detailing products!!
- CG Nick
Is there a list of the products used?
Shut up
Literally going through the exact same thing lol.. had my brake calipers painted blue and now my car is covered in blue spots all over.. not very noticeable because my mustangs black paint has blue flakes from the factory but still annoying since I paid a professional to do it.
Got say a big thank you for this video, my wife's newish Mini Countryman had some minor front damage repaired by dealer prior to collection, sadlyon its first clean 2 weeks later, I found all the flat surfaces were covered in overspray, hence dealers sprayer must have done rush job and not sheeted the whole car to avoid this, anyway an hour of fastidious clay bar treatment and oh my what a difference, its easy to forget the simple tricks and thank you for bringing this back to me. Subscribed and liked.
Thanks so much for watching, enjoy your detailing products!!
I did not realize Hydro Charge could fill! Good to know. Thanks Nick!
Absolutely! HydroCharge is extremely versatile for adding gloss, protection, enhancement to painted surfaces.
- CG Nick
I swear Nick is the salt bae of the car detailing community
Hey!! Thanks so much for watching!
- CG Nick
Agreed! And no cringing! He’s the man!
Yep. His knowledge is priceless!
Nick, about how much would that cost if done as professionally as you did? I need to have overspray removed from a car.
Hey Cynthia! Price can vary depending on amount of labor involved, size of vehicle as well as the detailers pricing.
Could you guys do a tutorial on how to remove clear coat overspray on rubber/plastic/mold/window/weather strip trims? Especially with the poor masking paint jobs, there seems to be a quality control issue with some auto body shops with ensuring whether paint overspray or clear coat overspray doesn't get caught onto window or plastic trims.
Great suggestion!
I have the same problem but with overspray from fence stain that was sprayed almost a year ago. Just now understanding how to remove the mist from entire car. Paint, glass, and trim. Jeez what a pain.
Reminds me of when my work place decided to spray paint the outside seats where my car was parked and the wind blew the spray paint to my entire car, it smelled like spray paint and was completely red. I won't forget that day I got out of work and realized that.. This brings me PTSD of that day! Good thing they paid for the damage to the car :)
Awesome! Hope everything worked out for you!
Thank you my cat has this and now I can fix it you guys are the best 👍🏽
Hey Anthony! Glad you enjoyed today's video. Happy detailing!!
- CG Nick
Either your cat is happier now or clawed you to death in the process. Either way, I would love to hear how it went 😆
After doing the claybar and hyrdroslick, should anything else be put on top of it? Does hydroslick need an additional wax or polish put on top of it?
Great video!! Just got my car back from the repair shop and the hood is rough. Add the wipe out to your shopping list too!!
Enjoy your detailing products!!
What is the best lubricant? can you please tell a bit more?
Thank you so much for this video I just purchased the black clay bar and your extreme wash and wax my car was painted but there is severe overspray on the hood of the car.. There is even primer overspray... Although my car is in perfect condition it is a 2003 I am not paying $800 for a custom detail hopefully this will take care of the problem and the extreme wash will give it a nice shine
Thanks so much for watching!!
- CG Nick
I just finished clay barring my hood and I have to say this stuff is spectacular. I had planned on reapplying a Fresh coat of clear To My Hood to give it that new feeling like the rest of the car it won't even be necessary the hood looks phenomenal once it's buffed and Polished like the rest of the car it's going to be insane
Hey man love your vids how can I remove car battery acid from car paint?
Nice job very detailed and timely
After cleaning the car, what liquid did u suggest to use with the clay bar? To remove the overspray paint without damaging clear coat.
Hey! Keep the clay bar thoroughly lubricated by using Clay Luber.
- CG Nick
Thank you very much for your training class it was knowledgeable. 👍🏽
Hi Darlene, glad you enjoyed the video!!
- CG Nick
Hey guys thank you for your videos I appreciate them! They are very informative! So I actually have a little bit of overspray on my car as well but I'm wondering is there any product that would help that stuff come off that would be faster than using clay bar? I've noticed with clay bar that it takes a lot of time to remove things and I just don't have a ton of time! Also I have also a little tiny algae spots on my vehicle as well from the previous owner and I'm wondering if there's any good products that might remove those as well that maybe faster than clay bar.
Hey Joseph! Try using the natural cleaning oils of Butter Wet Wax to gently scrub away overspray and light stains.
Hey Chemical guys do you guys own any vacuum cleaner that’s 30-45 dollars? Also I love your products best things I ever use
Hey Ricardo, unfortunately we do not manufacture vacuum cleaners.
Chemical Guys how do you know my name? 😂
What could I use to remove spray over from car trim and exterior plastic parts?
At my work the welder decided to spray paint near my brand new vehicle and now has red/black specs everywhere I’m so annoyed hope this is able to fix it. Just don’t know if i have it in me to do all this work
Hey Alex! Using a clay bar is very effective for removing overspray.
Ok I have a project like that coming up, This dude asked me to wash his wife's truck a while back. But I did noticed that the paint had alot of white spray paint dots. Don't I have to do the clean slate and clay bar process first?
Hey Gustavo! Start fresh by using Clean Slate just be sure to reapply coatings.
If you clay bar more than once a year do you need to reapply HydroSlick, EZ Glaze, and Jet Seal?
Hi Brandon! Clay bar won't remove your coatings but HydroSlick and JetSeal will last approximately 10 to 12 months on the surface and then should be replaced.
- CG Nick
Can you use this on the windshield of the car?
Are you using a medium cut clay bar or fine cut clay bar and how would you know which one to use for sure.
Hey Shawn! Thanks for watching. This is a Medium Duty Clay Bar which has no cut, but it works great for removing overspray. With the various levels of clay bar they all accomplish different tasks. Check out this video for tips on how to choose the right one.
- CG Nick
th-cam.com/video/7XpI7JJgdSs/w-d-xo.html
Will the clay bar work on that tough rubbery black plastic (?) trim on the exterior, around the window ? There is overspray there plus on the sills.
Hi Victoria! The clay bar should only be used for surfaces that are gloss painted, shiny or clear. Check out Nonsense All Purpose Cleaner to remove overspray and grime from trim.
Right you are , thanks for the tips. . .
Hey Charles, thanks for watching!!
- CG Nick
I had washed my vehicle after the local fires had left a lot of ash. I am aware that ask has lye and can be damaging to the paint.
My car is two weeks old and there is some contamination on the finish (almost like small water spots) I was suggested to use your Boat Water spot remover gel. Will that damage the finish? Thanks!
Yes, you can use a water spot remover gel to remove water spots on your vehicles paint. 😃
Chemical Guys thanks I just bought the heavy duty water spot remover...was just weary about using the formula that is intended for boats.
Much appreciated!
ordering , cant wait to pimp errr polish my 3 rides. thanks
Enjoy your detailing products!!
Had something very similar happen to my wife’s XC40. However, it has a ceramic coating that was professionally applied. Is this safe to do on a ceramic coated car? Or is there perhaps a less abrasive method that might be just as effective? Just don’t want to damage the ceramic coating if at all possible.
Hi Aaron! Try using the natural cleaning oils of Butter Wet Wax to gently scrub away overspray.
@@ChemicalGuys Fantastic, thank you!
As always I dig the videos. Quick question where can I get one of those “shop” shirts you and the crew always wear? Your apparel shop on the CG site has cool T shirts but def not the button downs. Hook a brutha up please lol
Hey there Keith! Unfortunately the button shirts are only available for internal use.
My work place got white over spray all over my 2020 wrx and it's red car so it's super obvious on the over spray. I doubt they would pay for the damages.
Oh no! Hopefully the tips shown in this video will help out!!
@@ChemicalGuys I plan on using the medium/light clay bar. Seeing as I daily drive it to work. I accumulate a lot of dust driving back and forth so I'm assuming that Clay Bar will get the job done. Then I can polish and wax the car right after, thanks to your videos I'll know how 😁👍
Tips or techniques working on honeycomb grill patterns
Hi David! For cleaning intricate grilles, a small brush like the Boar's Hair Detailing Brush will come in hand. Save time and effort when applying dressing by using an aerosol such as Black On Black to revive a deep gloss finish.
- CG Nick
Can you do a vid on how to remove fallout from ash safely? Best soaps, if need to wash multiple times? Since Cali is pretty much on fire.
Absolutely! Stay tuned! 😃
LOVE the new outro!!
We appreciate the awesome feedback!!
Does this work on plastic trim and also rubber trim near the windows? (The clay bar, to remove overspray)
Hi Kevin! Clay bar is intended for surfaces that are gloss painted, shiny or clear. Use Trim Clean to restore plastic and rubber trim.
www.chemicalguys.com/trim-clean/trim-clean.html?gtmListValue=Internal%20Search
@@ChemicalGuys wow thanks for the reply. I’m going to get this. It will remove overspray from the plastic trim ?
Will this work on overspray on headlights
Hey! Absolutely, use this process on any surface that is gloss painted, shiny or clear.
- CG Nick
How would you get overspray off of the rubber gasket, off of plastic mirror cover, wheel well etc...
Hi Anthony! Check out Trim Clean to remove filth and contamination from exterior rubber and plastic trim.
I have the same problem in my car. Just while repairing the bumper the body shop workmen might not have covered my car properly and I am finding the roughness almost all over the body except the glass areas. I am from India, please tell me if polishing and coating would fix it?
Hi there! Using a clay bar should extract the contaminants that give the vehicle a rough feeling. Once a smooth finish has been restored, use your favorite coating to prevent future damage.
- CG Nick
@@ChemicalGuys thank you sir
Can you do a video on clay mitt/towels?
Hi there! Great suggestion, stay tuned!
- CG Nick
I have a black car and I got industrial yellow overspray on it should I use a sandpaper ?
Hey! Try using a Medium Clay Bar to extract contaminants. Next, try using the natural cleaning oils of Butter Wet Wax to soften and remove the overspray.
So you don't have to polish even on black paint job?
Hey Pablo! When used correctly, the clay bar will not mar or scratch the paintwork.
How long do I have to wait to use clay bar on a new painted area
Hey! It is best to allow at least 30 days for new paint to properly cure.
Wonder if this will remove the overspray off my tool box?
Absolutely!!
That clay luber in the bottle in the thumbnail looks diluted, can you dilute Clay Luber like you guys did in the thumbnail and in the video? Can also tell it’s diluted because of the viscosity on how it’s swishing around in the bottle when handling
Clay Luber is ready to use and does not require dilution.
@@ChemicalGuys so how come you guys diluted it?
Where can I find those products or ones similar
Hi there! All of the products shown are linked in the description.
Can I use this on my glass also ?
Absolutely! You can use the clay bar on any surface that is gloss painted, shiny or clear.
@@ChemicalGuys even the black plastic
@CG could I use the clay bar on factory tinted windows?
Hey! We recommend claying the exterior glass only. Thanks for watching and happy detailing!
@@ChemicalGuys so meaning I could clay the factory tint windows but only from the out side, right
@@shengduh8740 why would you want to clay the tint?
Hi, just a quick question, how much pressure is normally applied with the clay bar?
Hey! Use firm but not excessive pressure when using a clay bar or Clay Block.
@@ChemicalGuys
Cool, thanks
I'm very grateful for this video, as I wish painter a patio chair near my son's new Tesla 😣
I'm not confessing anything to him, but will definitely offer to wash and "wax" his car.
Hope I'm able to restore the paint job! 🙏
Thanks so much for tuning in!
How do I order that product
Hi Adrian! Check out all of your favorite detailing products on our website.
www.chemicalguys.com/home
Does ash from wildfires mess up your paint?
Hi there! Yes, the combination of ash and fallout is very corrosive to paintwork and should be removed as soon as possible.
- CG Nick
Chemical Guys correct me if I'm wrong but it's not corrosive till it gets wet. Therefore, what I have done is blow it off first with my air hose then pressure washed it thoroughly making sure to get into every nook and cranny. Putting a good Sio2 coating on will protect the car in the future.
Hi! how to do the same from windows and plastic (piano black) trim?
Hey! Clay bar is safe for any surface that is gloss painted, shiny or clear.
Great thanks so much
Happy detailing!
Are you guys in Losangeles
Hey! That's correct, our flagship showroom is located in Gardena, California. Check out the Store Finder to locate the closest Detail Garage.
www.chemicalguys.com/storelocator?showMap=true&horizontalView=true&isForm=true
can i remove paint splashes with the clay bar ?
Hey! A clay bar will aid in the removal of larger paint specks. The natural cleaning oils of Butter Wet Wax will soften and remove road paint.
I painted a car and paper came of on the 1/4 panels and I got over spray paint on it how do I fix that
Hey Earl! You can use the same process shown in this video or try machine polishing with a White Hex-Logic Pad and P4 Precision Paint Polish to remove overspray.
Does it also work on windows ?
Absolutely!!
What is the name of the product that removes this overspray
Hi Greg! Check out this link.
www.chemicalguys.com/clay-bar-and-luber-synthetic-lubricant-kit-medium-duty/CLY_KIT_2.html?gtmListValue=Internal%20Search
I used the clay bar kit for paint on my car and it didn't work at all..
And clay bar is old school , just buy the clay block, that one u can just wash and keep using it. 😉
Gotta love the Clay Block!
Where are you located at
Hey! Our videos are filmed at Detail Garage Los Angeles. Use the Store Locator to find the closest showroom.
www.chemicalguys.com/storelocator?showMap=true&horizontalView=true&isForm=true
@@ChemicalGuys Thank you so much!
Hope the neighbour is paying lol
Thanks so much for watching!
Why does he use a white car I want to see the before and after
I used a paint pen on my car but didn’t like how it looked so I was wondering how to remove it 😑
We recommend reaching out to a professional painter or body shop in order to fix the damage.
How does that remove paint overspray that has adhered via the solvent carrier in the paint? The only thing I know of that can do that is extremely carefully using a new very sharp razor blade, which is very likely to do even more and serious damage to the paint with the slightest loss in concentration; and won't work unless basically nearly flat surfaces? This is merely a clay bar video. Clay bar won't remove solvent based paint spray?