I just got a seadoo spark and I love it. I also just got my license sends I’m 12. I have been watching you and my parents surprised me with a new seadoo spark
Hi Alvean, I am modding my trixx now, was wondering how this vinyl held up. I find spark plastic to be super hard to stick anything to, unlike all other models.
Lol!! So food for thought. Tape each end of your graphic in place. Then run some tape down the center. Pop one end up at a time. Cut the backing in the center and squeegee one side down. (They make squeegees with a felt tip that wont scratch.) No pull the tape in the center off and repeat the process on the other side. U always want to start from the center out. If the material stretches u can use a heat gun or torch to shrink it back in place. I do this for a living so i figured i would throw some info out there for ya. Ski looks danm good for a ugly model. I honestly think its the best looking one so far!! 👍👍
Jeff Bryner this is actually a GREAT Tip!!! 😄Thank you! I will do that on the other side of the ski after I’m done riding two face. Lol.. i will look for that squeegee with a felt tip also. Btw the Spark is not an ugly model 😉😂
@@AlveanAzurin lol. Look for a blue squeegee made by arlon. Its has a nice felt end on it. Great for what u are doing. I wrapped my black b1 blaster with neon pink and neon blue graphics. Thats how i did it and it worked great!. Btw yes the spark is!! Hahahaha😂😂😁
Alvean, next time use a heat gun to peel of stickers then spray with water & vinegar comes real clean. I do this every year when removing old registration sticker, AIS.
Hey! I always wanted to wrap my sea doo wake 230 pro 2019! Never really looked into it. So I search up ENVgraphics... how do you create a design? Do you go over it with an artist or something?
ZEPLUS7 yes they will go over designs with you. Contact Kevin Taylor and he will arrange you to get with the designer. You will be given proofs of the design before it goes to print. They will work with you until you live the design. A wrap will look badass on a wakepro!
DO NOT USE GOO GONE on your GTX. GOO GONE is specifically mentioned in the manual to be incompatible with the new hulls. Goo Gone is fine for the plastic Spark. WD40 is what the manual says to use on the newer hulls to remove sticky residue. Also, NO heat can be used on your GTX either. The hulls are not gelcoat like they used to be on the ST3 hulls.
Norman Ross Jr. yeah I seen that it the warning ⚠️ Seadoo sent out last year. I’m really particular of what I put on my GTX. Definitely baby both skis. Lol
Alvean Azurin What I don’t get is SD says all repairs can be done seamless with auto body paint. Auto body paint you can use most anything on so I don’t know what the SD hulls are so sensitive to chemicals but from all the reports I read they are.
I just got a seadoo spark and I love it. I also just got my license sends I’m 12. I have been watching you and my parents surprised me with a new seadoo spark
CONGRATULATIONS!!! The Spark is my top two favorite skis.
Hi Alvean, I am modding my trixx now, was wondering how this vinyl held up. I find spark plastic to be super hard to stick anything to, unlike all other models.
Wow.
Look like you in racing team now.
Looking fly
Daniel Garcia 😂... thank you ☺️
This is also better than the unicorn rap in my opinion
Thank you !
That looks sooo good
Thank you ☺️
Alvean Azurin no problem I was thinking about getting a spark jet ski bc u make it look sooooo fun 😊
Looks hot nice job!
4 The Love of The Shave thank you 🙏🏼
Looks great with your Signature name on it Yeeeeeeee
IG IAMMACCABEUS thank you ☺️
this is really cool
Baleigh Rash thank you, glad you like it.
Wrap looks GREAT! LOVE it!
Norman Ross Jr. thank you 🙏🏼
Looks awesome 😎
Cowboy Bishop vids thanks bud 🤙
Nice wrap🙂
Makes me want to go grab a spark
Nic Nac DO IT!!!! You should. Lol
Nice!!! Great vid
Cori thank you 😊
Planing on buying a spark and getting ecu tune and riser bars. Do you have any problems with the wrap bubbling or peeling.
ImFalcon no issues with most. Just the halo graphic part forms different bc it’s a different type of material. But other than that it’s GREAT!
So do you just email back and forth with ENV and find a design that you want or how does that work?
Lol!! So food for thought. Tape each end of your graphic in place. Then run some tape down the center. Pop one end up at a time. Cut the backing in the center and squeegee one side down. (They make squeegees with a felt tip that wont scratch.) No pull the tape in the center off and repeat the process on the other side. U always want to start from the center out. If the material stretches u can use a heat gun or torch to shrink it back in place. I do this for a living so i figured i would throw some info out there for ya. Ski looks danm good for a ugly model. I honestly think its the best looking one so far!! 👍👍
Jeff Bryner this is actually a GREAT Tip!!! 😄Thank you! I will do that on the other side of the ski after I’m done riding two face. Lol.. i will look for that squeegee with a felt tip also. Btw the Spark is not an ugly model 😉😂
@@AlveanAzurin lol. Look for a blue squeegee made by arlon. Its has a nice felt end on it. Great for what u are doing. I wrapped my black b1 blaster with neon pink and neon blue graphics. Thats how i did it and it worked great!. Btw yes the spark is!! Hahahaha😂😂😁
👍🏻❤️looks awesome I love it
Jose Rios thank you ☺️
Does ENV ship to the US?
What's your impression of the 120hp tune?? I would love more bottom end on my Trix. Not too bothered about top speed.
Trent Taylor it gives you great bottom and mid range power
Wait, but how did you plan the sizes and sections? Did you have to measure each panel?
you can buy templates online
The website doesn’t work anymore :(
Is it possible to wrap the bottom of the ski
I think you can. But not sure if that would be good if you beach your ski.
@@AlveanAzurinthanks
Came out nice
Where did you get your foot pads?
@@uqte those in the video are SC Wake
@@AlveanAzurin thanks for the reply how is the wrap holding up still? Getting mine done tomorrow
That’s sharp
Alvean, next time use a heat gun to peel of stickers then spray with water & vinegar comes real clean. I do this every year when removing old registration sticker, AIS.
where do you keep your phone when riding?
Chase Jackson I put it in the small glove box at a angle.
If you use a hair dryer or heat gun on low , they come right off !!
I always remove my graphics on my Seadoos as well !
Great job!
tim carps nice!!! Thanks for the tip.
@@AlveanAzurin
You're welcome !
Hey! I always wanted to wrap my sea doo wake 230 pro 2019! Never really looked into it. So I search up ENVgraphics... how do you create a design? Do you go over it with an artist or something?
ZEPLUS7 yes they will go over designs with you. Contact Kevin Taylor and he will arrange you to get with the designer. You will be given proofs of the design before it goes to print. They will work with you until you live the design. A wrap will look badass on a wakepro!
Wow! What a difference! Might have to wrap my Rxp 300..😎👍
Jet boat John it sure does make a difference! Check out ENV Graphics. 😁
DO NOT USE GOO GONE on your GTX. GOO GONE is specifically mentioned in the manual to be incompatible with the new hulls. Goo Gone is fine for the plastic Spark. WD40 is what the manual says to use on the newer hulls to remove sticky residue. Also, NO heat can be used on your GTX either. The hulls are not gelcoat like they used to be on the ST3 hulls.
Norman Ross Jr. yeah I seen that it the warning ⚠️ Seadoo sent out last year. I’m really particular of what I put on my GTX. Definitely baby both skis. Lol
Alvean Azurin What I don’t get is SD says all repairs can be done seamless with auto body paint. Auto body paint you can use most anything on so I don’t know what the SD hulls are so sensitive to chemicals but from all the reports I read they are.
First
Use a heat gun and it’ll peal right off:
Gift me a sea doo spark
Niccolo Imbrogiano I wish. If I could, I would 😁
SORRY!!!
Israel Bravo LoL.. for what??
Alvean Azurin you know lol