Polaris Gear: Polaris Hoodie: amzn.to/2MHTFHw OEM Shift Cable: amzn.to/2Wx901W This video contains affiliate links, which means that if you click on one of the product links and buy, I'll receive a small commission.
Lol. My old English teacher told me the word unthawed doesn't exist. It's either frozen and the opposite is thawed. Lol! Regardless it is a very helpful and informative video. Thanks!
If you look it up they say it's a word. I can't say I got an A+ in english but I feel I can communicate pretty well. My spelling was horrible but has actually gotten better with all the comments and stuff I respond to. I see more words and that has really helped my spelling.
@@johnniles7939 Check fuel pump, CDI, starter switch. Those are really common issues. If the engine is worn out and has no compression that is another issue that will cause a no start issue. Make sure you have fuel and spark. If you have both of those check compression.
@@johnniles7939 If it won't turn over I would suspect starter. You can tap on the starter while someone turns the key. Might get it started. Could be the switch. These Rangers won't start without pushing the brake. There is a pressure switch on the master cylinder. If that isn't working it won't start. You can bypass that by grounding the starter solenoid. I have not seen that fail much.
Thank you , I have a shifting problem and I hope you solved it. Funny thing, I was looking at that plastic over this morning. Tomorrow I'm going in. I hope it has a broken spring, it's Sept. here in Mn. , shouldn't be any Ice yet.Thanks again, great video, well done.
I would guess your problem is the spring unless you were hearing bad noises from the trans. Really easy to check the spring. I know it's not cold enough to freeze but you still might have water inside. That probably caused the spring to rust and fail. Good luck.
Good video. Thanks. Before the end of your video, I was ready to suggest using some contact cleaner spray. I've used it with good success in the past. But, it looks like the problem worked itself out. Thanks again.
our Polaris will not shift unless we turn it off. we can change gears easy when its not running. but we have to turn it completely off to do a gear shift. Any ideas on what is wrong?
@@mossman381 Thanks we will try to idle down AGAIN tomorrow. hope its not the clutch. that will be another question for you! we have been watching your videos for the last 2 hrs. YOU ARE GOOD! thank you!!!
This problem with shifting was water related. It was stuck in gear and wouldn't move at all. The idle is set on the carb. You turn the little knob. You don't want the idle so low it kills the engine all the time. I had a Ranger with a bad clutch and I had to shut it off to shift it. That was before TH-cam so I don't have a video on a clutch replacement.
Riding my 2000 xpedition a couple days ago and something up front locked up and it stalled, I thought the engine blew up but once I got it in neutral it fired back up, put it in 4wd and made it home. It’s been too cold for me to even look at it, I’ll try this weekend to see what it is.
mossman381 yeah as soon as this damn cold brakes, I’m crossing my fingers it’s something in the front end, it’s been taking spells where it pulls hard left or right, I have to put it in reverse for a foot or two and it’s fine, it’s an old beater, just haven’t had a chance to dig into it. Thanks mossman.
Had the same issue including the failure of the high range light. Not spending $100 for a switch on a 17 year old machine - just check the lever position for high gear
Our 2019 ranger north start shifter feels loose when it’s in park. And when we want to put it into high gear it feels like you have put it in pretty hard?
I haven't run the new 1000 Rangers so I don't know how they feel. I have run quite a few of the 900 Rangers and all of them seem to shift pretty stiff like. As for the loose feeling in park I would probably go back to your dealer. Maybe try out some other new Rangers they have to see if they feel the same.
@@mossman381 is the cable for the shifter that makes it 4wd or 2wd the same? Seems like these rangers r real problematic. Also i thought i changed all the fluids out when i got it. I changed the motor oil, rear differential, and transmission. I think i missed the front differential tho. Is this correct?
4wd is selected with a switch not a cable. If you have a 4x4 model the lever on the dash is for the rear diff lock. 6x6 models don't have a selectable diff lock. They are locked all the time. The front diff should have the fluid changed as well. Might be more important for the front diff because there is very little fluid in there.
I have heard of the little spring breaking but never frozen water in there. By the looks of the beat on shift lever this has been happening for awhile.
Polaris Gear:
Polaris Hoodie: amzn.to/2MHTFHw
OEM Shift Cable: amzn.to/2Wx901W
This video contains affiliate links, which means that if you click on one of the product links and buy, I'll receive a small commission.
I appreciate the hard work put into all of your videos. Keep up the good work
Lol. My old English teacher told me the word unthawed doesn't exist. It's either frozen and the opposite is thawed. Lol! Regardless it is a very helpful and informative video. Thanks!
If you look it up they say it's a word. I can't say I got an A+ in english but I feel I can communicate pretty well. My spelling was horrible but has actually gotten better with all the comments and stuff I respond to. I see more words and that has really helped my spelling.
Great video!… And luck was on your side, I’m taking mine off and cleaning it and I don’t even have issues
Thanks for help, had the same problem. Got that fixed, now it won't start. Thanks again.
@@johnniles7939 Check fuel pump, CDI, starter switch. Those are really common issues. If the engine is worn out and has no compression that is another issue that will cause a no start issue. Make sure you have fuel and spark. If you have both of those check compression.
@@mossman381 Won't ever turn over, think its and electrical issue some place. When it warms up some, I'll take a second look at it. Thanks.
@@johnniles7939 If it won't turn over I would suspect starter. You can tap on the starter while someone turns the key. Might get it started. Could be the switch. These Rangers won't start without pushing the brake. There is a pressure switch on the master cylinder. If that isn't working it won't start. You can bypass that by grounding the starter solenoid. I have not seen that fail much.
@ Forgot to push on the brake. It is running now. thanks for your help.
Glad it was an easy fix! It's a wonder they didn't do internal damage beating on that linkage.
Or break the plastic cover. Someone beat on that lever hard.
Thank you , I have a shifting problem and I hope you solved it. Funny thing, I was looking at that plastic over this morning. Tomorrow I'm going in. I hope it has a broken spring, it's Sept. here in Mn. , shouldn't be any Ice yet.Thanks again, great video, well done.
I would guess your problem is the spring unless you were hearing bad noises from the trans. Really easy to check the spring. I know it's not cold enough to freeze but you still might have water inside. That probably caused the spring to rust and fail. Good luck.
My name is Manny.
What tool did you use to remove the cover to get to the spring?
Great videos, great explained videos, thanks, keep uploading you videos.
Thank you Mr MossMan, very informational video and well laid out good job...👍👊
Glad you enjoyed it. There isn't a lot of info on these older Rangers.
Good video. Thanks. Before the end of your video, I was ready to suggest using some contact cleaner spray. I've used it with good success in the past. But, it looks like the problem worked itself out. Thanks again.
our Polaris will not shift unless we turn it off. we can change gears easy when its not running. but we have to turn it completely off to do a gear shift. Any ideas on what is wrong?
Idle is to high or your clutch is shot.
@@mossman381 Thanks we will try to idle down AGAIN tomorrow. hope its not the clutch. that will be another question for you! we have been watching your videos for the last 2 hrs. YOU ARE GOOD! thank you!!!
This problem with shifting was water related. It was stuck in gear and wouldn't move at all. The idle is set on the carb. You turn the little knob. You don't want the idle so low it kills the engine all the time. I had a Ranger with a bad clutch and I had to shut it off to shift it. That was before TH-cam so I don't have a video on a clutch replacement.
A+ video. I have a 2007 Polaris Ranger 6x6 and it’s hard to shift.
If it's hard to shift while running and then easy to shift when the engine is off it's probably your clutch.
Riding my 2000 xpedition a couple days ago and something up front locked up and it stalled, I thought the engine blew up but once I got it in neutral it fired back up, put it in 4wd and made it home. It’s been too cold for me to even look at it, I’ll try this weekend to see what it is.
That doesn't sound good. I would see what the fluid looks like.
mossman381 yeah as soon as this damn cold brakes, I’m crossing my fingers it’s something in the front end, it’s been taking spells where it pulls hard left or right, I have to put it in reverse for a foot or two and it’s fine, it’s an old beater, just haven’t had a chance to dig into it. Thanks mossman.
Had the same issue including the failure of the high range light. Not spending $100 for a switch on a 17 year old machine - just check the lever position for high gear
I have the same problem, Sometimes it wont go into high gear easily.. I have to push the ahift lever faster
Mine wouldn’t shift clutch was wore out.
If you can't shift at idle but you can shift when the machine is off, that usually means the clutch is wore out.
Mossman381, You and I have the same year of Rangers and I was wondering if you could make a video doing an oil change on your Ranger 500? Thanks,
Mine isn't due for a change but when I do need one I will get my camera out.
Thanks so much. Also thank you for making such fun and very helpful videos! :)
Many thanks. Very useful for me mate. Regards Glenn Australia
Glad it helped
Our 2019 ranger north start shifter feels loose when it’s in park. And when we want to put it into high gear it feels like you have put it in pretty hard?
I haven't run the new 1000 Rangers so I don't know how they feel. I have run quite a few of the 900 Rangers and all of them seem to shift pretty stiff like. As for the loose feeling in park I would probably go back to your dealer. Maybe try out some other new Rangers they have to see if they feel the same.
Seems like im having all the same problems with my ranger as u have had with yours. Is the gear ahift cable the same as the 4x4 selector cable
These problems are very common on these older Rangers. Gear shift cable should be the same 4x4 or 6x6. The trans is in the same spot on both.
@@mossman381 is the cable for the shifter that makes it 4wd or 2wd the same? Seems like these rangers r real problematic. Also i thought i changed all the fluids out when i got it. I changed the motor oil, rear differential, and transmission. I think i missed the front differential tho. Is this correct?
4wd is selected with a switch not a cable. If you have a 4x4 model the lever on the dash is for the rear diff lock. 6x6 models don't have a selectable diff lock. They are locked all the time. The front diff should have the fluid changed as well. Might be more important for the front diff because there is very little fluid in there.
@@mossman381 thnx. Installed the gear shift cable but its struggling to go in reverse now. Probably need to adjust the nuts i guess
Yes, that is probably all it needs. Why was the shift cable replaced?
What kind of grease did you use?
Any good quality all purpose grease should work.
Get a new plate gasket along with o rigs and spring.they will work cheap insurance. Good luck
Adjust that shifter cable
@@WilliamHannus Watch the video. It was frozen inside.
Never heard of that happening
I have heard of the little spring breaking but never frozen water in there. By the looks of the beat on shift lever this has been happening for awhile.
mossman381 I’ll keep that in mind if I ever run into that problem with mine