When pressing the axle through the 6013-2rsr (big bearing), you need to support the inner race of the bearing on the backside with a metal tube. Otherwise, the balls receive the full force of the interference press fit. While this may be fine in some instances, it is generally not good practice to have the ball bearings receive the assembly pressure.
When pressing the axle through the 6013-2rsr (big bearing), you need to support the inner race of the bearing on the backside with a metal tube. Otherwise, the balls receive the full force of the interference press fit. While this may be fine in some instances, it is generally not good practice to have the ball bearings receive the assembly pressure.
שאפו, ההשקעה ניכרת בכל שלב ושלב.
Сразу видно человек знает что делает👍👍👍
Nice Job!!! Thank you for making this.
Thanks, Great Video
thanks about these instructions, it was very important to me.
super video ----díky
Nice press 👍🏻
xk no hay ningu video de como en rayar un rin de bmw r1200 gs y aliniar
which parts did you renew beside the 2 bearings
👍
but waht was defect? Lager?
How much you do that if i asked you to do it for me
ottimo lavoro peccato per la qualità video
Looks like you installed the large oil seal in the opposite direction of the one you replaced; has it held up ok?