The track turned out AWESOME! Stay tuned for the Dust Bowl 500 featuring Red Beards Garage, Junkyard Digs, Rather B Welding, Vasily builds, Build Break Repeat, and Tyranis Customs!
get it banked up a bit in the turns for the highest speeds you guys can get for such a short dirt track. start watering it and working it with your more powerful karts that are capable of drifting those turns.
Here's an idea for watering the track! Get a plastic 55 gallon drum and make a trailer to bolt it onto. Then, make an attachment for water to spill off of and a manual switch to stop the flow. Pull it behind the Kubota, and give it a try! Can't wait for race day!
At 3:00 I absolutely love how you're talking to us on camera and we just see Ike in the background tearing it up in the Durango lol. I absolutely love y'all, your videos make my day and what you guys do looks very fun!
Like a mini dirt Darlington! Awesome! Also, for watering, a big IBC tank, a valve, a piece of pvc with holes drilled in it. Cap the ends off and set it in a truck bed. Get a pull behind spike aerator to help that water get down in the track.
When we were kids we would use 2 quad bikes to build a track. One in reverse, the other behind pushing it along while it spun in reverse. Worked surprisingly well at the cost of tyres....
For water: some large garbage cans have a hose connection on the bottom. Grab a pickup truck, two large garbage cans, and a hose. We used to put them in a mini van, but gotta check gallon to weight limit.
@@LewdnCute calcium chloride? I still wouldn't want risk breath in too much magnesium chloride. They need to look at drainage before applying chem if they had that weird angle in the track. Don't want to make a pond.
Guys you are great. Thank you for producing fun and clean backyard gokart videos, my kids and I watch them all and we are building our own, picked up a used Manco FoxII and put a live axle and pred212, disc break and all thanks to you guys and GPS.
I think it was 1986 when I was in NC for a BMX race where they built the track inside Charlotte Motor Speedway. It was made out of that North Carolina clay and by the end of the weekend that track was slick with rubber from our tires. Great memories from that weekend.
Use old tires and chain them together and drag the tires it will help you with gain rubber to the track and will better the track grip wise. To water a track you could use a pull behind water tank for a watering system or get an old farmersudical bin us pvc pipe and cut some holes in it
Time to hit the hardware store for an in-ground sprinkler set. That way John won't break off a sprinkler head when (not if) he crashes! Try sourcing a water tank on a skid or trailer that could be hooked up to the system so you don't have to plumb all the way to it.
A suggestion for irrigation... Get one of those plastic totes with the aluminum cages around it. It will have a 2' valve down at the bottom. then get a piece of 2' pvc pipe, say 6" long, and drill a series of 1/8' holes. Cap one end and connect the other to the tote.Set it in the back of a truck, with the tail gate off. Fill with water... . Irrigation truck...
You have something awesome going on. Constantly evolving. Between the weekly builds and the specials, and new shop and friends/employees. Always cheers me up watching cars and cameras. And the podcast is perfect listening to in the garage.
Hey here is a tip for the watering system, salt. You could put it in a water tank thingie that you use to water the track or simply spread it before watering, makes the soil retain moisture longer and kinda clumps things better. I use seawater all the time in a 1000L tank or two to do just this. A 200L (50gallon) barrel with a pipe with some holes in it, in the bucket of the Kubota maybe?
Pvc pipe, some brass nozzles and a water tank with pump on a trailer or on the tractor. I built one to keep dust down in the riding arena at the barn I used to run.
I have 87 acres and it took me 2 months to build an complete atv track. I dragged a flat bed off of a truck to form the track and the end result was amazing but this Cali heat has my track building on hold.
At the 6:39 mark I'm thinking just race around the track and the dirt will move from the inside of the oval to the outside all by itself. Over time you will have to rake the outside dirt back into the middle. Have fun!
track watering system, 55G drum, water pump, and a lawn sprinkler, on a trailer should so the trick. fill the drum up from the pond tow it to the track turn on the pump and let the sprinkler do its thing while driving around the track
Mount some axles half ones on a piece of PVC pipe a big one plug the ends drill holes in it put a line from a water tank of some sort and it will gravity feed with a line down to the PVC pipe if you hook it up right and pulled around with the Kubota that should work fine!✌️
Charles doing what i have many times told you Guys, use a Fence or wooden pallet's or make a wooden triangle, where is a metal edges to push materials away, & put alot weights on it & pull it in tractor or car to get ground level & to make mud places less muddie, exsample in forest section where is alot mud pull it level & put Gravel on those pit's & you can dig a ditch on the right side of the road, so the water goes along the ditch to the right place so you can somehow keep the road out of the mud and water.
Wear a respirator and send it haha. Sprinklers would help but I assume no water out there. If the creek is nearby you could run a hose from it to a 12v marine pump + car battery. I have one on the boat and it puts out some decent pressure. The dust bowl 500 might end up being the mud bog 100 if it rains.
A few 50 plastic drums in the bucket or on the back of the Tractor filled with water and some holes in the bottom should be able to water the track. You can add some spickets or some kind of ball valves to regulate the flow. Maybe even solder a piece of flattened copper pipe to spread it out. An old sprinkler may work as well. Just dont weigh down the bucket 2 much. Im sure just the bucket will work as well but will be hard to get a good sprinkle
Work the track with the bucket against the path of travel can also try and build more of a berm this way as well. Can wait to see more please and thanks!
Can't wait just got my first 200 can't wait till morning to take it somewhere with lots of land and a downhill's mud and everything it's going to be fun by the way keep it up doing good
Wet the track down . Then roll the track in with the gocarts at a low speed. Start on the outside edge and follow the leader til the dirt is smooth all the way to the inside. Thats how we used to roll in Riverside speedway in South Carolina. The only difference we raced cars.
Watering system: use the durango to pull a trailer with a kiddie pool on it. Im thinking either Ike and Charles use super soakers, or if you want to get real fancy you could connect an actual water pump to the pool and connect sprinklers. It'll be fine
I'm such a dork so excited.lol anyway to send you guys pics i have 2 carts and a minibike a gas power razor bike and a Chinese 125 pit bike... You guys are awesome
Just use a 55 gal drum and a few pipes and elbows a pipe cap and a pipe valve all things you can get at your nearest farm store put them all together in the proper order then drill some holes for a sprinkling effect and you got a sprinkler if you have a trailer to put the barrel in. Good luck my young friends and the not so young one also lol but always have fun.
Hell yeah brother love making the track to was awesome! With the Freedom Factory coming alive and getting in the swing of it now everybody is going to get tracks of there own. Love it!
To water down the grass just go to harbor freight or northern tool and get a cheap pull behind sprayer. Just drill out the original nozzles on it to spray more water.
Y’all need a drag harrow and a beefy zero turn mower just to keep that area clean and neat…you could also grab yourselves a ditch witch and run a line to the centre of the track by that tree
Get a 55 gallon drum drill holes in it for pvc pipe with small holes drilled in it on the lower side or bottom add shut-off valves to control the water mount it on a trailer or truck
as far as water, take that big tote you got plumb a section of 2 "PVC with some holes in it and start making laps warning if you want it to not be dusty water it with 4 or 5 loads the night before.... and put one gallon of liquid dish soap in the water.... it will keep dust down and make clean up easier..
Looks super fun, go to tractor supply and get one of those field pesticide sprayers, it has a bar in the back with pray nozzles, I’d recommend using that to put water down because it’s mobile and you can hook it to the back of a go cart or atv. Speaking about atv, whatever happened to the atv and golf cart?
Turn the durango into a track prep vehicle with a big plastic farm tank in the back with a 12v pump and horizontal tube with holes drilled in it. It would be a good episode on its own
Love it!!! Great episode! I have a buddy that wholesales like Ike and I'm always trying to talk him into this kinda s*^*!!!! Charles is a great addition and really compliments the 2 of you guys.
Looks good,,, man you could park rvs there,, hey Ike,,,, you ever raced circle track,,,,, you should.. Virgil’s Root Beer,,,,, good choice,,, , as for your track wetter, blue plastic 55 gallon barrel, some pvc pipe, (drilled) and use your creek as your water source
Durango has sludge in the pickup tube from previous owners not changing the oil enough AND dodge welded a nut inside the oil pan for the oil plug to screw into that doesnt let the sludge drain when the oil does get changed. Drop the pan, clean the sludge out of the pickup tube and the pan. It should be fine after that.
Take the crosskart and trophykart on first gear hot laps on the inside turns. Check reliability on both and make a berm for your turns all I one shot 👍
Hey fellas your show is great. I’ve seen Ike talking about the six in his chev. If it’s the donk I think it is 500hp is entirely possible. In Australia we only had 202ci we called it the Holden red motor. I highly recommend you look up “Numnuts” HR Ute Burnout. Then look for it at the “Summer Nats” Also you will see the same basic engine in what we call a XU1 Torana. Look and learn son✌️
Just bought some merch wish the it will be fine shirt came in black but red will do love watching this channel one of my favorites all ways have the notifications on and maybe a grey color would be awesome!!!!
Oh helll yes. On my way!
Hey Kevin I absolutely loved the collaboration with Nolan from Donut media 😄👍🏻👍🏻 that was so cool love the channel
But… you’re already there, if you’ve not left already
Can j and m tv come😂🤣
Bring a 55 gallon drum with you and some 1’ black iron pipe the boys need a way to wet the track down
@@garageofscrap i wonder if they made the vid in advance and he did it to be funny 🤔🤣
The track turned out AWESOME! Stay tuned for the Dust Bowl 500 featuring Red Beards Garage, Junkyard Digs, Rather B Welding, Vasily builds, Build Break Repeat, and Tyranis Customs!
Nice track building you guys it’s awesome but don’t over heat the engine of that truck that you just did
that transition 12:35 !!!
You have room for a bigger track JS...
get it banked up a bit in the turns for the highest speeds you guys can get for such a short dirt track. start watering it and working it with your more powerful karts that are capable of drifting those turns.
Dust Bowl 500 lots of bumping and nudging for sure!!! Can't wait to see all the guys rippen around on different machines..
I love how far y'all have gotten. Watching you guys go from John's parents garage, to a "multi plex" and sports track lol. Awesome dudes
I think your 4 engine go-cart will rip ass on that dirt track.
You guys need a couple eBay turbos on that Durango
Yup
I'd button it up and upgrade the cooling system before putting bolt-ons and power adders.
It's a joke field car have fun with it
TWIN TURBO DANGO?
I think cars and cameras is going to be way more funny with Charles joining
Totally agree.
Charles and Ike together always crack me up
He's a fantastic addition to the team!
frrrrrr ong
Here's an idea for watering the track!
Get a plastic 55 gallon drum and make a trailer to bolt it onto. Then, make an attachment for water to spill off of and a manual switch to stop the flow. Pull it behind the Kubota, and give it a try! Can't wait for race day!
At 3:00 I absolutely love how you're talking to us on camera and we just see Ike in the background tearing it up in the Durango lol. I absolutely love y'all, your videos make my day and what you guys do looks very fun!
Glad to see Charles in the crew!
Charles is definitely perfect for this channel glad he joined
this video proves his worth
I love the quick frame of Charles drinking the beer after Ike's devastating loss to John
The mini dirt version of Darling Raceway. Love it, can't wait to see it!
Hello From The Eddie Friday TH-cam channel!!!
Like a mini dirt Darlington! Awesome! Also, for watering, a big IBC tank, a valve, a piece of pvc with holes drilled in it. Cap the ends off and set it in a truck bed. Get a pull behind spike aerator to help that water get down in the track.
I know a lot of people have said it but man Charles is a great addition to the team.
John spinning while the Durango was just shredding was pure filming genius 👌🏼
When we were kids we would use 2 quad bikes to build a track.
One in reverse, the other behind pushing it along while it spun in reverse.
Worked surprisingly well at the cost of tyres....
Everything that happened in this video was a good idea.
It's pretty cool that y'all have a full on crew now.
For water: some large garbage cans have a hose connection on the bottom. Grab a pickup truck, two large garbage cans, and a hose. We used to put them in a mini van, but gotta check gallon to weight limit.
Treating it with magnesium chloride will work much better and last quite a while.
@@LewdnCute calcium chloride? I still wouldn't want risk breath in too much magnesium chloride. They need to look at drainage before applying chem if they had that weird angle in the track. Don't want to make a pond.
Guys you are great. Thank you for producing fun and clean backyard gokart videos, my kids and I watch them all and we are building our own, picked up a used Manco FoxII and put a live axle and pred212, disc break and all thanks to you guys and GPS.
Awesome small oval drift track!!! The race will be epic 💯🔥
Drifting is slow, it’s all about going straighter
I think it was 1986 when I was in NC for a BMX race where they built the track inside Charlotte Motor Speedway. It was made out of that North Carolina clay and by the end of the weekend that track was slick with rubber from our tires. Great memories from that weekend.
The track looks like Darlington! Looks good brother!
Use old tires and chain them together and drag the tires it will help you with gain rubber to the track and will better the track grip wise. To water a track you could use a pull behind water tank for a watering system or get an old farmersudical bin us pvc pipe and cut some holes in it
Imagine a '97 Durango that still has most of it's body... *Laughs in New England*
Lol, New England mechanic here. Worked in Mass and RI my whole life and I am a qualified rust technician. The mopars are tried and true pos.
Midwest here, thatd be a craigslist gem.
As a Rhode Island Resident, I can assure you that this comment us 100% accurate... 🍻🍻
Time to hit the hardware store for an in-ground sprinkler set. That way John won't break off a sprinkler head when (not if) he crashes! Try sourcing a water tank on a skid or trailer that could be hooked up to the system so you don't have to plumb all the way to it.
A suggestion for irrigation... Get one of those plastic totes with the aluminum cages around it. It will have a 2' valve down at the bottom. then get a piece of 2' pvc pipe, say 6" long, and drill a series of 1/8' holes. Cap one end and connect the other to the tote.Set it in the back of a truck, with the tail gate off. Fill with water... . Irrigation truck...
Think about adding an outer ring to the track (connects to the main course) for faster carts. Also gives a built in pit row for the bigger machines.
You have something awesome going on. Constantly evolving. Between the weekly builds and the specials, and new shop and friends/employees. Always cheers me up watching cars and cameras. And the podcast is perfect listening to in the garage.
Hey here is a tip for the watering system, salt.
You could put it in a water tank thingie that you use to water the track or simply spread it before watering,
makes the soil retain moisture longer and kinda clumps things better.
I use seawater all the time in a 1000L tank or two to do just this.
A 200L (50gallon) barrel with a pipe with some holes in it, in the bucket of the Kubota maybe?
Pvc pipe, some brass nozzles and a water tank with pump on a trailer or on the tractor. I built one to keep dust down in the riding arena at the barn I used to run.
This is what ive been waiting for! now you will have a place to hold races. Build some race mowers or karts and have race weekends.
This is the best thing yet to come
Just. You. Wait.
I have 87 acres and it took me 2 months to build an complete atv track. I dragged a flat bed off of a truck to form the track and the end result was amazing but this Cali heat has my track building on hold.
At the 6:39 mark I'm thinking just race around the track and the dirt will move from the inside of the oval to the outside all by itself. Over time you will have to rake the outside dirt back into the middle. Have fun!
track watering system, 55G drum, water pump, and a lawn sprinkler, on a trailer should so the trick. fill the drum up from the pond tow it to the track turn on the pump and let the sprinkler do its thing while driving around the track
Mount some axles half ones on a piece of PVC pipe a big one plug the ends drill holes in it put a line from a water tank of some sort and it will gravity feed with a line down to the PVC pipe if you hook it up right and pulled around with the Kubota that should work fine!✌️
I'd love to see a racing mower build now that ya'll made an oval track. Maybe with one of those 670cc twins you have, then send it around that oval.
It's a reverse banked oval. Can only help you drift. lol
Charles doing what i have many times told you Guys, use a Fence or wooden pallet's or make a wooden triangle, where is a metal edges to push materials away, & put alot weights on it & pull it in tractor or car to get ground level & to make mud places less muddie, exsample in forest section where is alot mud pull it level & put Gravel on those pit's & you can dig a ditch on the right side of the road, so the water goes along the ditch to the right place so you can somehow keep the road out of the mud and water.
Wear a respirator and send it haha. Sprinklers would help but I assume no water out there. If the creek is nearby you could run a hose from it to a 12v marine pump + car battery. I have one on the boat and it puts out some decent pressure. The dust bowl 500 might end up being the mud bog 100 if it rains.
You guys are so close to that gold play button! Bet that TH-camr race brings you past the hump! Keep up the great content guys!
This is very exciting! I am loving the continuous growth of the channel over the last few months! Well done, gentlemen.
A few 50 plastic drums in the bucket or on the back of the Tractor filled with water and some holes in the bottom should be able to water the track. You can add some spickets or some kind of ball valves to regulate the flow. Maybe even solder a piece of flattened copper pipe to spread it out. An old sprinkler may work as well. Just dont weigh down the bucket 2 much. Im sure just the bucket will work as well but will be hard to get a good sprinkle
I was hooked once I saw the preview for the 3-wheeler-while-holding-root-beer-race.
That Durango is actually pretty decent for having fun in
Work the track with the bucket against the path of travel can also try and build more of a berm this way as well. Can wait to see more please and thanks!
Charles: "IT IDLES NOW!!"
Ike: [kills engine and dreams]
so rude
Love this kind of content
That's what I'M sayin!
Can't wait just got my first 200 can't wait till morning to take it somewhere with lots of land and a downhill's mud and everything it's going to be fun by the way keep it up doing good
YES, MORE OVAL TRACK FOOTAGE, BADASS, make it BIGGGERRR
Wet the track down . Then roll the track in with the gocarts at a low speed. Start on the outside edge and follow the leader til the dirt is smooth all the way to the inside. Thats how we used to roll in Riverside speedway in South Carolina. The only difference we raced cars.
Durango needs the front and rear diffs welded. Pretty wild when all 4 wheels spin
"North Carolina clay"
*Track is dustier than a desert*
anything is dusty when its dried out. let it rain just 1" and watch the clay turn to frickin peanut butter
Clay + no moisture = Dust
Dude that’s just how it is here. When it’s dry it’s a dust cloud and when it’s wet it’s peanut butter.
And let that dust get on you when you're hot and sweaty.
@@kennycampbelljr5896 You get covered in a layer of sweat mud
Tractor supply sells a lawn sprayer that you pull behind your mower might do good for watering the new track down
That’s what I was thinking
Watering system: use the durango to pull a trailer with a kiddie pool on it. Im thinking either Ike and Charles use super soakers, or if you want to get real fancy you could connect an actual water pump to the pool and connect sprinklers. It'll be fine
Hi y’all from west Alabama love ya
It’s more like the Egghead 300. The track looks egg shaped 😂😂😂
I think it should be named that
an egg is an oval john did say to build him an oval
I went to a track in Georgia shaped like that.
Darlington speedway in South Carolina is a egg shape
I'm such a dork so excited.lol anyway to send you guys pics i have 2 carts and a minibike a gas power razor bike and a Chinese 125 pit bike... You guys are awesome
Can we get a “hold my root beer and watch this” shirt? 😂
Just use a 55 gal drum and a few pipes and elbows a pipe cap and a pipe valve all things you can get at your nearest farm store put them all together in the proper order then drill some holes for a sprinkling effect and you got a sprinkler if you have a trailer to put the barrel in. Good luck my young friends and the not so young one also lol but always have fun.
Hell yeah brother love making the track to was awesome! With the Freedom Factory coming alive and getting in the swing of it now everybody is going to get tracks of there own. Love it!
For the dust how about 2 55gal drums on a trailer filled with water towed by the Durango. Some pipe with holes in them to spread the water
Calsium cloride road salt is something we use in Norway to reduce dusty gravel roads.
To water down the grass just go to harbor freight or northern tool and get a cheap pull behind sprayer. Just drill out the original nozzles on it to spray more water.
Y’all need a drag harrow and a beefy zero turn mower just to keep that area clean and neat…you could also grab yourselves a ditch witch and run a line to the centre of the track by that tree
Get a 55 gallon drum drill holes in it for pvc pipe with small holes drilled in it on the lower side or bottom add shut-off valves to control the water mount it on a trailer or truck
I cannot believe you are just now getting to 1M subs. You guys are awesome!
as far as water, take that big tote you got plumb a section of 2 "PVC with some holes in it and start making laps warning if you want it to not be dusty water it with 4 or 5 loads the night before.... and put one gallon of liquid dish soap in the water.... it will keep dust down and make clean up easier..
Looks super fun, go to tractor supply and get one of those field pesticide sprayers, it has a bar in the back with pray nozzles, I’d recommend using that to put water down because it’s mobile and you can hook it to the back of a go cart or atv. Speaking about atv, whatever happened to the atv and golf cart?
So excited for upcoming races and events on this track!!!! You guys rock!!
Turn the durango into a track prep vehicle with a big plastic farm tank in the back with a 12v pump and horizontal tube with holes drilled in it. It would be a good episode on its own
A trailer.
Love it!!! Great episode! I have a buddy that wholesales like Ike and I'm always trying to talk him into this kinda s*^*!!!!
Charles is a great addition and really compliments the 2 of you guys.
Looks good,,, man you could park rvs there,, hey Ike,,,, you ever raced circle track,,,,, you should.. Virgil’s Root Beer,,,,, good choice,,, , as for your track wetter, blue plastic 55 gallon barrel, some pvc pipe, (drilled) and use your creek as your water source
Turned our back field into a dirt track and raced my 63 impala around the 5 acre field. What a blast.
Durango has sludge in the pickup tube from previous owners not changing the oil enough AND dodge welded a nut inside the oil pan for the oil plug to screw into that doesnt let the sludge drain when the oil does get changed. Drop the pan, clean the sludge out of the pickup tube and the pan. It should be fine after that.
That is sick dudes. I used to have a super small one in my backyard but then we made a much bigger oval track at my grandpa's material yard.
I feel the need....the need for SPEED!
More like the need of…SONIC POWER SPEED!!
th-cam.com/video/0RKUMXxOeqEu/w-d-xo.htmlr
You and me both🦖
I'm a precision machine of speed and aromatics
Might i suggest a track camera? like up on a pole so we can see the whole track at one time?
😏
Y'all should have a lawn mower racing competition! You guys and a bunch of other channels should build them and have a race on that track!
Take the crosskart and trophykart on first gear hot laps on the inside turns. Check reliability on both and make a berm for your turns all I one shot 👍
Love your content guys!
I have been waiting for this! I so want to do this with my nieces and nephews. They would love it
Startsky and hutch have nothing on Ike sliding on the hood :)
That SENT me😂
That was Bo and Luke, bubba.
Hey fellas your show is great. I’ve seen Ike talking about the six in his chev. If it’s the donk I think it is 500hp is entirely possible. In Australia we only had 202ci we called it the Holden red motor. I highly recommend you look up “Numnuts” HR Ute Burnout.
Then look for it at the “Summer Nats” Also you will see the same basic engine in what we call a XU1 Torana. Look and learn son✌️
So glad y'all have built a track. Can't wait for the first race
thank you please more of this
18:14 before Ike has even finished his sentence, there's a solid "I don't know what you're talking about" XD
To water track, 55 gallon drum and pvc T and small holes, attach to box blade
I like that 1&2 and 3&4 are different banked and shaped.
Awesome video guys can’t wait to see you guys burn rubber on the track 👍🏻👍🏻
Sweet track brothers.
that durango looks like it needs a welded diff
Just bought some merch wish the it will be fine shirt came in black but red will do love watching this channel one of my favorites all ways have the notifications on and maybe a grey color would be awesome!!!!
And i've been watching you guys from the Beginning
Let us see some laps in the Bronco! :D
The CarsandCameras crew is getting super cool. Keep it up guys!
Add banking make more symmetrical and yall should be having some real fun. Especially if you get really into it
I'd use the claws on your scrapper box to get below level og the ground then wet it and smooth it down then drag it and wet it again.