Demonstrations like this are very helpful for explaining things for some of us and will bring up other questions and ideas which will bring up more questions and ideas ! I believe this is what gives us our amazing technology ! Thank you sir for your time !
I connected pull up resistor and 12v to jack and it works like a charm. I had removed it with its chip near coils and i looked at datasheet for chip i conected 12v and pull up resistor on pin for on off and it works nicely at about 1500rpm
Would it be correct to say that this is the same type of motor that can be found on a quartz clock movement? (although controlled by an oscillator instead of a reed switch, in order to mantain a stable speed)
Try smacking on an AC current in the solenoid that changes direction with the frequency of magnet rotation(120 degress). That should change the magnetic field periodicly which switches between attraction and repeling the neodymium magnets. That being, ad a current direction switch a little behind the magnetic switch. In thought, the faster the motor turns, the faster the AC current should switch.the added attraction might improve the speed. I think that you would need an(or 3) extra magnetic switch and two transistors in parallel, so that it govern the direction of the flow of energy.I think that migth be an AC motor. Solenoid pushes a magnet away from the wire, turns of, switches on current in opposite direction, turns of, begins anew. - You might mess with radio signals though.
Well done! The only other thing I would add to improve your vid a bit more would be to provide details about your power supply (e.g. V, A, & how/why it fluctuates as the motor spins up). Thanks for sharing!
This looks perfect for me, if it wasn't pulsed, it wouldn't work would it, magnetic lock right. I,m a learner and have a VCR spare. I want to increase the rpm,s, would more power do the trick. Or add a another coil. Or is it more complicated than that. Thanks
The only problem with this type of hook up is one needs high voltage, lots of turns of magnet wire, extra amps and hardly any rpm at the end. Might make for a better induction type of motor maybe. The bearing is definitely of high quality. Maybe a person could use it and use plastic or wood as drum with the magnets. That might throw some good RPM.
Hi, If you'd added a Full Bridge Rectifier (AC symbol wires) on the leads of the Magnetic Reed Switch, then used the exit DC leads from the Bridge Rectifier & attach those to a VRLA/SLA AGM battery that is heavily sulphated, you would have a nice desulphator device that could rejuvenate your old UPS batteries. 😋🤓 Doug Konzen discovered this. 🙄 I also have 2 videos on that on my channel as well. 😉 Other than that, nice setup. 😄😆😎
+Ludic Science I respect ur opinion but I disagree ..Google bedini or Tesla and try.or simply try the free plans on this website..you can power your house and your family happy for free..no bills and no power cut: www.free-energy-info.com/DonKelly.pdf
Using a hall effect sensor would give you faster switching, the reed switch has mechanical limitations and will suffer bounce at higher switching cycles.
I have made several pulse motors with Reed switches and they burn out using 12 volts supply; the contacts weld together may be it was the back EMF ....that's why you added the reversed diode
Can this system create free energy? How much is the input power needed to make the electromagnet? Can't the motor generate more power than that? I am just curious as to why it cannot generate free energy.
How the magnets work thru all that aluminum thickness when the armature is under what your telling us.the cap underneath has the armature & a full magnet.why deceive us because I have a VCR Head I recently pulled out?
I'm sorry, but something is lost on me. Why is the electric motor underneath the rotor with the three magnets there? Why can't you demonstrate this pulse motor "without" the electric dc motor underneath the top rotor with the three neodyne magnets attached to it?
Ludic Science That makes a lot more sense lol, I was wondering why those wires didn't start smoking and how your supply could handle that but the meter said A so I assumed it was in amps. Anyway, I loved the video, I always check out your channel when I'm in need of inspiration :) so thank you
gods son christ jesus died on the cross for our sins so that by believing in him we can have life...belief in christ jesus be a free gift from the father, given to them [ through thee hearing of heth words ] whom he hath chosen for salvation
You are very good at explaining things. Thank you for keeping things simple. Good job.
Demonstrations like this are very helpful for explaining things for some of us and will bring up other questions and ideas which will bring up more questions and ideas ! I believe this is what gives us our amazing technology !
Thank you sir for your time !
Thanks!
Ken Gamble º
Ken Gamble yes
حساب طريقة
Yes, it's a good product, but it's not a pulse motor. :)
Awesome video! You explain things really well.
NICE VERY NICE.THANK you for posting videos like this one.
Simple construction and well described. Outstanding!
Thanks
This video was very easy to understand! Thank you for your interesting content.
:)
Great vids. Thank you for explaining how everything works.
This is not a pulse motor, but the product is beautiful.
I made a bedini generator and the back EMF tends to make the reed switch stick...
i love this channel :)
thank you for sharing !
Thanks!
you are teaching very well, thanks you too much brother.
Great video and explanation thank you,
A simple brushless motor. Very clever.
Nice video, thanks :)
I connected pull up resistor and 12v to jack and it works like a charm. I had removed it with its chip near coils and i looked at datasheet for chip i conected 12v and pull up resistor on pin for on off and it works nicely at about 1500rpm
That machine is from the late 1970's as my friend's dad had one like that back in 1979/1980.
Would it be correct to say that this is the same type of motor that can be found on a quartz clock movement? (although controlled by an oscillator instead of a reed switch, in order to mantain a stable speed)
Try smacking on an AC current in the solenoid that changes direction with the frequency of magnet rotation(120 degress). That should change the magnetic field periodicly which switches between attraction and repeling the neodymium magnets. That being, ad a current direction switch a little behind the magnetic switch.
In thought, the faster the motor turns, the faster the AC current should switch.the added attraction might improve the speed. I think that you would need an(or 3) extra magnetic switch and two transistors in parallel, so that it govern the direction of the flow of energy.I think that migth be an AC motor. Solenoid pushes a magnet away from the wire, turns of, switches on current in opposite direction, turns of, begins anew. - You might mess with radio signals though.
yes i've seen some demo same like that except they uses a neodymium magnet on four sides or more acts like free energy
Well done!
The only other thing I would add to improve your vid a bit more would be to provide details about your power supply (e.g. V, A, & how/why it fluctuates as the motor spins up).
Thanks for sharing!
Thank you
Very simple explanation thks
Would it be possible to use a self blinking led that used avalanche breakdown to pulse itself?
Your videos are simple and welle explained, it s really pleasant to watch. What s your accent?
yoo can fine tune the timing of the coil by adjusting the angular position of the reed switch.
This looks perfect for me, if it wasn't pulsed, it wouldn't work would it, magnetic lock right. I,m a learner and have a VCR spare. I want to increase the rpm,s, would more power do the trick. Or add a another coil. Or is it more complicated than that. Thanks
Interesting & good
Pretty Lucid Ludic!
:D thanks
The only problem with this type of hook up is one needs high voltage, lots of turns of magnet wire, extra amps and hardly any rpm at the end. Might make for a better induction type of motor maybe.
The bearing is definitely of high quality. Maybe a person could use it and use plastic or wood as drum with the magnets. That might throw some good RPM.
Hi,
If you'd added a Full Bridge Rectifier (AC symbol wires) on the leads of the Magnetic Reed Switch, then used the exit DC leads from the Bridge Rectifier & attach those to a VRLA/SLA AGM battery that is heavily sulphated, you would have a nice desulphator device that could rejuvenate your old UPS batteries. 😋🤓
Doug Konzen discovered this. 🙄
I also have 2 videos on that on my channel as well. 😉
Other than that, nice setup. 😄😆😎
Pretty damn cool ! I must have 30 of these motors laying around. If you doubled the amount of magnets, would the RPM's double ?
Thanks. No, for more speed you need a stronger solenoid.
+Ludic Science
Would more magnets give it more torque ?
Ken Gamble I think yes, because the inertia would increase and hence the moment of inertia will increase which can be regarded as a sort of torque
please tell me.what diode are u used for electro magnet.FROM PHILIPPINES.. THANK U
How did you wind the coil? Does it matter if one winds it by hand and you get a pile would d coil...viz not a neat coil ?
Do you need to run it at 30v ?! Will it run at lower voltage ?
thank you very much
If you have more magnets or you get a faster RPMs and where can you hook up a generator to it to make it self-sufficient
Thomas Slack how
in the next video can u tell us how to make buck converter
Hola desde Colombia:
Una pregunta, tu fábricas los carretes para las bobinas, o donde los compras por favor.
Vale, gracias.
Los hago
thanks
did you mean the head assembly for the Betamax model
Hi, good job, buddy!!!.,... PS: Taken off
the bottom disk, & try running it, without it., YOU will get better speed.
You have created an engine out of what you suggest. You could have used any bearing. I would like to do in fact, the engine.
now i understand thanks
thumbs up..if you add 1 transistor bedini circuit you can have a free energy motor..did you try?
+Sam Jas there is no such thing as free energy.
+Ludic Science I respect ur opinion but I disagree ..Google bedini or Tesla and try.or simply try the free plans on this website..you can power your house and your family happy for free..no bills and no power cut: www.free-energy-info.com/DonKelly.pdf
Intresting videos
Interesting...
the first comment on the first video ever
Спасибо. Хоть и не понял ,ни слова. По жестам и видео все очень понятно. Большое спасибо. А если добавить еще катушек, мощность возрастет ,в 2-3 раза
what maximum voltage is your reed switch ?
Are the magnets all North facing?
Yes
Using a hall effect sensor would give you faster switching, the reed switch has mechanical limitations and will suffer bounce at higher switching cycles.
I have made several pulse motors with Reed switches and they burn out using 12 volts supply; the contacts weld together may be it was the back EMF ....that's why you added the reversed diode
Hola, cómo se llama tu canal en español ?, Gracias !!!!!!
what happens when there's no diode attached??
i did not understand that how the motor switch is on and off automatically
Can this system create free energy?
How much is the input power needed to make the electromagnet? Can't the motor generate more power than that? I am just curious as to why it cannot generate free energy.
+rushi jariwala it is very simple: it is forbidden by the laws of physics
I wanted to know how much does the electromagnet consume? And how much can the motor can generate.
can you send a schematic for this project?? thanks
ดีมากคับ
You would have the same effect with the magnets and the coil. I cannot see what you achieved here.
he achived efficiency for building a pulse motor
and it's for educational purposes
How the magnets work thru all that aluminum thickness when the armature is under what your telling us.the cap underneath has the armature & a full magnet.why deceive us because I have a VCR Head I recently pulled out?
マグネットスイッチは利用価値が多いな！
The coil should be attrack then switch off for better rpm
What is your first language?
Español
❤❤❤❤❤👍👍👍👍👍👍
I NEDD HOW TO CONVERT PULSE MOTOR TO A.C. MOTOR PLEASE
I did the 999th like !
how to make solar penal
Puede poner el.esquema
the faster the rotor spins the lower the amp draw.
70 amps?
+volt897 milliamps
hay I cannot see the switch turning
Its so small you wont even see it moving.Search for its animation in google
own
I'm sorry, but something is lost on me. Why is the electric motor underneath the rotor with the three magnets there? Why can't you demonstrate this pulse motor "without" the electric dc motor underneath the top rotor with the three neodyne magnets attached to it?
Yes you can do that: th-cam.com/video/A2_yvnEZQww/w-d-xo.html I just used the motor as the rotor part
Sorry ....I thought you were making a magnetic motor with no battery required to run it.I wasn't paying enough attention.
+1
Wait, that pulls 75 amps!?!?! Its not very efficient for 400 rpm lol. It's still a coll project though
+Yextus miliamps. 0.075 amps
Ludic Science That makes a lot more sense lol, I was wondering why those wires didn't start smoking and how your supply could handle that but the meter said A so I assumed it was in amps. Anyway, I loved the video, I always check out your channel when I'm in need of inspiration :) so thank you
:D
3:55 listen to your video carefully there's strange sound in the background
maybe my neighbors
@@ludicscience I turned the volume up. No strange sound here except the hiss of the loud speaker
Taco meter
ah ok
first
meh..
Please explain in Hindi language
,
join ME. EMFE .. Engineering of Magnetic Force Engines FACEBOOK
gods son christ jesus died on the cross for our sins so that by believing in him we can have life...belief in christ jesus be a free gift from the father, given to them [ through thee hearing of heth words ] whom he hath chosen for salvation
bad copy of my motor
Fake.....I can see the circuit board underneath the motor.
Eric Morrison
idiot watch my video if u dont belive how it can be fake lol