Thank you thank you thank you! This old lady with bad knees has been trying for 2 days to get mine going again after I changed battery. Got up on step ladder and couldn't read small print. Out of desperation I googled my garage door opener brand and I was lead here. Followed instructions and voila it works. Getting in and out of car with my replaced left knee healing to manually open and close garage door was getting old. So thank you again kind sir!
WOW. This is AMAZING. We seriously sit in front of the garage and press the remote 10-50 times before it would finally go up or down. Just followed your guide and up and down it goes! Thank you!
Thanks so much for sharing your knowledge! I actually called a garage door company for instructions and they wanted to send out a tec for $119 service charge. All it took was watching your video, which I chose because it was less than a minute and a half. That's about how long it took to get the job done. You're the best!
I cannot thank you enough... Moved into a new house and only one of openers were working.. My wife nagging me to get new ones, went online to buy them and then out of curiosity found this video. You saved me time and money THANK YOU!!!!!!!
Thank you so much for this video. I've been at it for three months to make this happen. I've ask the neighbors, my dad and nothing. I saw this video last night. My garage door opener is now working in less then a minute. Thank you again. GOD Bless you!!!
I have the same garage door opener and remote. This is NOT how the owner's manual says to do it. It is also NOT how three other TH-cam videos (by garage door opener "professionals") say to do it. After struggling with these off and on for months, and finally giving up, today, for the first time in two years, ALL of my garage door opener remotes now work, and they all work on both doors! I can open either door from inside either car, or from inside the house! It took all of two minutes. THANK YOU SO MUCH for posting this. There is nothing worse than having to get out of the car in Michigan when it's -20*F to open the freaking garage door. You just made my winter! :-)
I have the same story, but this still didn't work for me....Have two Craftsmans one works one doesn't...both were working fine, then one quit! Pissin me off!
James Salango 1. Have your remote handy. 2. Push the big red button on the back of the opener. 3. Push the button on the remote within a few seconds. The light on the opener flashes and you're done. You can synch several remotes to each opener.
U are a lifesaver!!! The directions that came with the remote was bunk.. i watched ur clip and on 1:38 minutes my garage door was resurrected from a a deep deep 7 day COMA!! THANKS BRUTHA... CHEERS
I read the instruction manual that came with the remote and followed it carefully... 5 times. Then I turned to the internet. The manual is completely different to the instructions you gave me. Odd but it's working now 🙌🙌🙌
Thank you! Worked like a charm. We've been doing some home remodeling so our garage was full of supplies for that remodel and we parked on the driveway. Haven't used the opener in about a year. Winter is coming so we wanted to start putting the car back in the garage but the garage remote didn't work. It does now!
Another thank you, incoming! My son changed the light on my garage door opener and inadvertently reset my remotes. I thought the batteries had gone dead and it took a few days for me to track down some replacements. Imagine my surprise when the new batteries didn't bring my remotes back to life. We get pretty spoiled by these things so getting in and out of the car to punch the key pad every time I left or came home was starting to really annoy me. Anyway, I decided to find a video that might help me in case i was putting the new battery in wrong or something. Well, voila! Your video helped me figure out that there was nothing wrong with my remotes that a simple re-programming couldn't cure. Thanks for posting this very helpful video!
Thanks so much for a very SIMPLE solution to fixing my remote. I have the same model remote and door opener you have in your video. For some reason my remote suddenly stopped working, and after changing the battery, it still didn't work. Found your video, followed your directions, and it WORKED! Thanks so much!
Very simple process as you indicated, however, the part when you mention the green light coming on after pushing the red button on the garage door opener saved me a lot of time, because, it didn't come on the first few times I tried it. After watching your video, I reprogrammed all three of my remotes within issue. Thank you.
One of buttons didn't work well on my remote so I switched the operation to another one of the three available. Couldn't figure out how to program till I saw this video. Great tutorial, simple to program. Took less than 10 seconds. Thanks.
My remote just went out this afternoon! Replace the coin battery did nothing. With your directions, it's back working again. I had never needed to use that button in the 17 years we've had the opener. I also replaced one of the two 60w bulbs -- it had burned out. Thanks for the tip! 👍
It worked for me. Thanks so much!!! That's truly amazing!!! I did not think it could be that easy and that fast before watching this video. I am so glad that I have searched via Google and did it through the help of this video. You are awesome!!! and this video is truly a god send! You have not only saved us all a lot of time from searching for an unnecessary universal remote control, reading/figuring out to programing the universal remote control, but also saved us from buying it to incurring the unnecessary expense, when the program or reprogram in this video simplify the whole works that any one can do it if one is willing to find the most efficient way for it to work. Thank god for your video!!! Especially the first one I watched that simplify the whole scope of fixing.
Thank you so much for posting this video!! I lost the manual and was at a loss at how to reprogram my remote when I changed the key code. I didn't realize it was that simple! Thanks again!!!
Thank you, it was perfect! For a couple of days I went crazy following the directions printed on the side of the red button, but it said "press and hold" which did not work. Now following your directions it was a simple as 1, 2, 3.
Thanks....other videos did not show all parts involved in programming and yours did. I"m a visual learner and your video allowed me to do what I needed to do!!
Thanks for a great video. The Crastman's instructions says press red butoon, then press and hold remote control button until light flashes. Repeated this many times and light did not flash. Your video shows press red button and then press and release remote control button. Light flashed.
High 5! Changed the outdoor keyless entry pad and then had to change the car remotes too. I have the same garage door opener so this was great to get this how to video to help me out.
Thank you for your instructions. I found two extra remotes that I can use in other vehicles and found your video to be just what I was looking for! Great Job!!!
Thank you so much for this helpful video! Now that I can finally open my garage door from my car with my new replacement remote, I feel like I’m living in the lap of luxury!
I know the feeling. My remote died and my new was came with vague head scratching instructions and now it's almost as if I walked back into the 21st century.
Thank you. Rather than waiting on the incompetent rental agency to send a guy out to do this (coming into my house while I'm not home in order to do it, which I don't like), I did it myself in two seconds thanks to this.
Thank you. I found one in an abandon car at work and have had it in my tool box for years. My wife lost hers and I put in a new battery and it works perfect.
Thank you!!! You're awesome!!! Can't believe they had a video on how to re-program a 2002 garage door opener!!! Going to try it now. You R a Rock Srar!!!!!
Hi my friend, Did the same exact thing you described, the bulb clicks showing that remote got synchronized / paired / recognized . But when you press subsequently the garage door does not open or close. Any ideas? The wall mounted key pad works fine though. There is new brand new coin battery in remote, there is only CFL bulb in the socket ( not LED) , after repeated attempts garage door still does not open. The wall mounted garage door inside the garage, and out side the garage door facing porch work perfectly fine. Please let me know if you have any suggestions. Thanks.
Thank you that works great BUT how do you get 2 remotes to work ? i have a craftsman 1/2 hr power model 139.53970 srt it will only take 1 remote , when i program the second one the first one wont work .
I am having the same problem. I purchased a universal remote yesterday and my craftsman original remote stopped working. I am going to try reprogramming both when i get home. Thanks for the video
Thank you for your video! My remote won't do anything after I click the reset button on the receiver. I just changed a new batter for the remote. What do you think the problem could be? Thank you!
Thank You Thank You You have saved my marriage, I changed the code while my wife was at work she came home and the remote would not work the worst part it was pouring down rain so she got wsoaked and was not a happy camper but it works now thanks again.
Does the door have to be open or closed? I noticed yours is open. But a lot of people in other videos are claiming that it has to be closed while programming
I had a Craftsman 1/2 HP too, but it did not work. The receiver did not capture the signal from the remote opener (the light did not blink). I even tried with 3 differents remotes (2 Craftsman and 1 LiftMaster). About a year ago, it worked just fine. I can open and close the garage using the remote. Then about 6 months ago, I cannot close the garage door with the remote (OK when open it). Now, neither close nor open, ain't working. The garage lift motor is about 8 years old. Any idea? Thanks for sharing!
these Sears clickers are so huge (like 1980s cellphones!). Cant the key fob size clickers such as the Multicode 3070, be used with the Sears units ? Thanks in advance for any insight!
These directions are to add a new remote or re-program an existing one. To clear ALL remotes, press and hold the "learn" button on motor unit until the learn indicator light goes out (app. 6 seconds). Then you must re-program each remote or keyless entry.
Hi Sears . Stopped by your store and clothing ng and departments and tractors and John Deere products. Mr. D. Branch well wishes. And also looking forward to the next time.
Hoping you can help. I can program my remotes just fine but when I program the keyless entry the remotes stop working. And vice versa. Any idea how to get them all to work at the same time? Thanks!
This was great - the main pad was flashing, I replaced the remote battery and then nothing. You instruction was excellent. I wish I would have watched this before reading the very uninformative manual.
Simple and to the point, that's why I love older tutorials like this
Thanks bro. 7 years later and still helping.
Thank you thank you thank you! This old lady with bad knees has been trying for 2 days to get mine going again after I changed battery. Got up on step ladder and couldn't read small print. Out of desperation I googled my garage door opener brand and I was lead here. Followed instructions and voila it works. Getting in and out of car with my replaced left knee healing to manually open and close garage door was getting old. So thank you again kind sir!
Glad this helped you, take care!
WOW. This is AMAZING. We seriously sit in front of the garage and press the remote 10-50 times before it would finally go up or down. Just followed your guide and up and down it goes! Thank you!
Thanks so much for sharing your knowledge! I actually called a garage door company for instructions and they wanted to send out a tec for $119 service charge. All it took was watching your video, which I chose because it was less than a minute and a half. That's about how long it took to get the job done. You're the best!
I cannot thank you enough... Moved into a new house and only one of openers were working.. My wife nagging me to get new ones, went online to buy them and then out of curiosity found this video. You saved me time and money THANK YOU!!!!!!!
Thank you so much for this video. I've been at it for three months to make this happen. I've ask the neighbors, my dad and nothing. I saw this video last night. My garage door opener is now working in less then a minute. Thank you again. GOD Bless you!!!
Awesome, glad this helped you!
I have the same garage door opener and remote. This is NOT how the owner's manual says to do it. It is also NOT how three other TH-cam videos (by garage door opener "professionals") say to do it. After struggling with these off and on for months, and finally giving up, today, for the first time in two years, ALL of my garage door opener remotes now work, and they all work on both doors! I can open either door from inside either car, or from inside the house!
It took all of two minutes.
THANK YOU SO MUCH for posting this.
There is nothing worse than having to get out of the car in Michigan when it's -20*F to open the freaking garage door. You just made my winter!
:-)
Thanks for the great comment! I'm glad this finally worked for you!
Yes, I agree, too, I am in Michigan as well.
Hi there I’m home now I’ll call you
I have the same story, but this still didn't work for me....Have two Craftsmans one works one doesn't...both were working fine, then one quit! Pissin me off!
James Salango
1. Have your remote handy.
2. Push the big red button on the back of the opener.
3. Push the button on the remote within a few seconds.
The light on the opener flashes and you're done.
You can synch several remotes to each opener.
U are a lifesaver!!! The directions that came with the remote was bunk.. i watched ur clip and on 1:38 minutes my garage door was resurrected from a a deep deep 7 day COMA!! THANKS BRUTHA... CHEERS
I read the instruction manual that came with the remote and followed it carefully... 5 times. Then I turned to the internet. The manual is completely different to the instructions you gave me. Odd but it's working now 🙌🙌🙌
Your the man after all these years this thing is still kicking! Thank you.
Thank you! Worked like a charm. We've been doing some home remodeling so our garage was full of supplies for that remodel and we parked on the driveway. Haven't used the opener in about a year. Winter is coming so we wanted to start putting the car back in the garage but the garage remote didn't work. It does now!
Another thank you, incoming! My son changed the light on my garage door opener and inadvertently reset my remotes. I thought the batteries had gone dead and it took a few days for me to track down some replacements. Imagine my surprise when the new batteries didn't bring my remotes back to life. We get pretty spoiled by these things so getting in and out of the car to punch the key pad every time I left or came home was starting to really annoy me. Anyway, I decided to find a video that might help me in case i was putting the new battery in wrong or something. Well, voila! Your video helped me figure out that there was nothing wrong with my remotes that a simple re-programming couldn't cure. Thanks for posting this very helpful video!
Thanks so much for a very SIMPLE solution to fixing my remote. I have the same model remote and door opener you have in your video. For some reason my remote suddenly stopped working, and after changing the battery, it still didn't work. Found your video, followed your directions, and it WORKED! Thanks so much!
Thank you SO much. Your video made this easy! Both remotes had stopped working when I tried to program a new keypad. Simple and GREAT video!
Easy and direct.. thank you! TH-cam is definitely the ultimate owners manual! Nicely done!
Very simple process as you indicated, however, the part when you mention the green light coming on after pushing the red button on the garage door opener saved me a lot of time, because, it didn't come on the first few times I tried it. After watching your video, I reprogrammed all three of my remotes within issue. Thank you.
One of buttons didn't work well on my remote so I switched the operation to another one of the three available. Couldn't figure out how to program till I saw this video. Great tutorial, simple to program. Took less than 10 seconds. Thanks.
Thanks, I almost spent more than $200 to fix my door. Thanks again for sharing your knowledge
Thank you for posting this. As others have said, the directions included with the product do not work, but these directions worked for me.
My remote just went out this afternoon! Replace the coin battery did nothing. With your directions, it's back working again. I had never needed to use that button in the 17 years we've had the opener. I also replaced one of the two 60w bulbs -- it had burned out. Thanks for the tip! 👍
Hi, many thanks for the video. Does the garage door have to be open before you start programming?
It worked for me. Thanks so much!!! That's truly amazing!!! I did not think it could be that easy and that fast before watching this video. I am so glad that I have searched via Google and did it through the help of this video. You are awesome!!! and this video is truly a god send! You have not only saved us all a lot of time from searching for an unnecessary universal remote control, reading/figuring out to programing the universal remote control, but also saved us from buying it to incurring the unnecessary expense, when the program or reprogram in this video simplify the whole works that any one can do it if one is willing to find the most efficient way for it to work. Thank god for your video!!! Especially the first one I watched that simplify the whole scope of fixing.
Thanks for your awesome comment! I'm glad this helped so you were able to save money from having to call someone or replace it. Take care!
Thanks, it worked !
I bought my first home last month and the instructions on the main unit are useless. Your video helped.
This video was soooo easy to follow. The instructions on the opener itself were confusing. Thanks!
Thank you so much for posting this video!! I lost the manual and was at a loss at how to reprogram my remote when I changed the key code. I didn't realize it was that simple! Thanks again!!!
Thank you. This was very helpful. Thanks to your help, I took care of the remote right in time, before the winter weather
Thank you, it was perfect!
For a couple of days I went crazy following the directions printed on the side of the red button, but it
said "press and hold" which did not work. Now following your directions it was a simple as 1, 2, 3.
Yes...success!!! I literally spent two days trying to figure out the buttons and instructions that came with my new remotes. Thanks so much!
Thanks....other videos did not show all parts involved in programming and yours did. I"m a visual learner and your video allowed me to do what I needed to do!!
Make sure when you replace the battery the positive side is down. Great video. It helped a lot!
Thanks for a great video. The Crastman's instructions says press red butoon, then press and hold remote control button until light flashes. Repeated this many times and light did not flash. Your video shows press red button and then press and release remote control button. Light flashed.
High 5! Changed the outdoor keyless entry pad and then had to change the car remotes too. I have the same garage door opener so this was great to get this how to video to help me out.
Thanks! After reading and repeating the instructions on the unit multiple times, I turned to TH-cam and fixed it in 2 seconds! Thank you thank you!!
Awesome glad it helped!
ya i did the same thing nothing at all what the instructions said..way to easy thanks for uploading this vid lol
Thank you for your instructions. I found two extra remotes that I can use in other vehicles and found your video to be just what I was looking for! Great Job!!!
Thanks my wife almost killed me ..you're a life saver
Thank you times a million. I was ready to chuck it until I listened to your video. Both old and new remotes now work perfectly.
Thanks a lot it worked for me too thanksX10.
Thank you so much, it took about 2 seconds to reprogram my remote. I appreciate you! 🙏🏾
Thank you so much for this helpful video! Now that I can finally open my garage door from my car with my new replacement remote, I feel like I’m living in the lap of luxury!
I know the feeling. My remote died and my new was came with vague head scratching instructions and now it's almost as if I walked back into the 21st century.
Great, took me less than a minute. It's way better than another video I looked at.
Thanks.
Thank you. Rather than waiting on the incompetent rental agency to send a guy out to do this (coming into my house while I'm not home in order to do it, which I don't like), I did it myself in two seconds thanks to this.
Thank you. I found one in an abandon car at work and have had it in my tool box for years. My wife lost hers and I put in a new battery and it works perfect.
Thank you! You made it very simple...
You just saved me $100, I love this. Thank you for the simple instructions.
Probably the most useful vid on TH-cam. Thanks.
You made my mom happy as a clam at high tide. Thank you!
It took longer to watch the video than to program the remote.
Well done. Thank you..
Thanks so much. Just moved to a new house and needed to change everything. You're my hero.
Thank you!!! You're awesome!!! Can't believe they had a video on how to re-program a 2002 garage door opener!!! Going to try it now. You R a Rock Srar!!!!!
this dummy tried to reprogram the remotes for weeks and after seeing your video it took less than 5 minutes. THANKS
thank you soooooo much it worked like a charm any tips on the range of the remote
Thanks! This was a huge help and it saved me a lot of hassle. Thanks for making and sharing it.
Thanks for video. I'm wondering how do you add a 2nd remote without 1st one being undone?
Hi my friend, Did the same exact thing you described, the bulb clicks showing that remote got synchronized / paired / recognized . But when you press subsequently the garage door does not open or close. Any ideas? The wall mounted key pad works fine though. There is new brand new coin battery in remote, there is only CFL bulb in the socket ( not LED) , after repeated attempts garage door still does not open. The wall mounted garage door inside the garage, and out side the garage door facing porch work perfectly fine. Please let me know if you have any suggestions. Thanks.
great video all these years I didnt know you had to reprogram
Thank you that works great BUT how do you get 2 remotes to work ?
i have a craftsman 1/2 hr power model 139.53970 srt it will only take 1 remote , when i program the second one the first one wont work .
I am having the same problem. I purchased a universal remote yesterday and my craftsman original remote stopped working.
I am going to try reprogramming both when i get home.
Thanks for the video
Great video. Never thought it would be that easy!
Thank you for your video! My remote won't do anything after I click the reset button on the receiver. I just changed a new batter for the remote. What do you think the problem could be? Thank you!
Thank you so much for teaching me to program my remote control, it's very easy with your help.
Dude your the best didn't have a clue and watched you and did the same and I'm back in business, thanks
Wow! I tried this and it worked. Thank you!!
Thank you for this helpful video and for keeping it up on the internet.
Thanks for your video. It took all of 2 minutes from start to finish!
Thank you for showing this simple procedure.
WOW. thank you, worked perfect on 1st attempt. very easy explanation.
THANK YOU SO MUCH!!! I just could not figure it out and this was so simple! Hurrah!!!
simple and quick. thanks. way different than what's printed on the opener.
Thank you so much for your video. The instruction manual made it appear more complicated that it is.
Exactly the info we needed. Thank you!
Thank You Thank You
You have saved my marriage, I changed the code while my wife was at work she came home and the remote would not work the worst part it was pouring down rain so she got wsoaked and was not a happy camper but it works now thanks again.
Thanks for posting the video. Straight and to the point. 👍
It was that easy 😂😂😂 my mom been asking me to program it, I just did it lol. Thanks
Thank you! Worked like a charm. Appreciate you putting up this video :)
Quick , easy and simple. Thank you very much
This is great much better than that instruction of owner's manual. Ty
thanks for the video. watched yesterday. helped me out!
Thanks so much. The fix worked perfectly and you saved me from buying a new one off the internet :)
Does the door have to be open or closed? I noticed yours is open. But a lot of people in other videos are claiming that it has to be closed while programming
OMG!! Was it this easy?? Thanks bro. Now I believe that "Knowledge is power"
I had a Craftsman 1/2 HP too, but it did not work. The receiver did not capture the signal from the remote opener (the light did not blink). I even tried with 3 differents remotes (2 Craftsman and 1 LiftMaster). About a year ago, it worked just fine. I can open and close the garage using the remote. Then about 6 months ago, I cannot close the garage door with the remote (OK when open it). Now, neither close nor open, ain't working. The garage lift motor is about 8 years old. Any idea? Thanks for sharing!
Thanks so much. It's always easier with directions :)
I love short videos that do the job.
Thank you so much. I had to redo a current one when I set up a new one for me!
Thank you very much for the helpful tips. Saved me a lot of headaches
Thanks for the direct and directions.
these Sears clickers are so huge (like 1980s cellphones!). Cant the key fob size clickers such as the Multicode 3070, be used with the Sears units ? Thanks in advance for any insight!
Thank you for sharing!!! the world needs more of you :)
Thank you sooooo much! I thought my remote was broken and was about to order a new one!
does this clear all other remotes, or is this simply adding one?
These directions are to add a new remote or re-program an existing one. To clear ALL remotes, press and hold the "learn" button on motor unit until the learn indicator light goes out (app. 6 seconds). Then you must re-program each remote or keyless entry.
Hi Sears . Stopped by your store and clothing ng and departments and tractors and John Deere products. Mr. D. Branch well wishes. And also looking forward to the next time.
Thank you for posting this! So helpful.
Thank you for this. it saved me 100 bucks
Hoping you can help. I can program my remotes just fine but when I program the keyless entry the remotes stop working. And vice versa. Any idea how to get them all to work at the same time? Thanks!
Perfectly explained fix!
Thank you!
Thank you, now I am not going to purchase a new remote!!!! I probably wouldn't get a new one to work without watching this... lol!!!!
Quick, easy AND accurate!! Thanks so much!
This was great - the main pad was flashing, I replaced the remote battery and then nothing. You instruction was excellent. I wish I would have watched this before reading the very uninformative manual.
THANK YOU! Just saved us a huge fight and $40 for the handy man to come.
Thank you. Been getting my butt kicked for over an hour. One minute twenty-five seconds later, I have a clear answer. Thanks again.
Do you know what’s the size of the battery of the remote in this video?? I’m trying to look for one and reprogram my garage door