DreamMaker Spas X400 Hot Tub - Factoryestores.com
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- • Available at www.factoryesto...
• Four person hot tub
• LED color changing light
• Eleven self controlled jets
• Dual air control (can make one side with no jets and the other with jets)
• Foam filled for insulation
• Made with high density polyethylene (lightweight and virtually indestructible)
• Has four built in cup holders
• All DreamMaker hot tubs are water tested for up to 24 hours
Ever heard of anti-foam bro? Lol
My dream maker spa blows the fuse for the jets constantly; I have started to buy the 250v/20a replacement ceramic fuses in bulk. This after I replaced the whole control box since the previous balboa box did the same thing. I have yet to hear a satisfactory answer as to why this happens. It worked fine with the new box for about 3 months and started blowing fuses just like the old box. The light and temp controls work, but the fuse for the blower/heater keeps blowing.
Same issue I'm having!
I also had the same problem, water was leaking onto the wires from the control panel. I used silicone around the temperature/jet control panel. good luck
Why does the Jets cut off when the thermostat it's off
Lost my man you’re trying to find how many gallons of water does it hold
How do you fix a leaking jet?
I need to know why the hot tub is running on 110 is it possible it could not heat up right with a 110 voltage
Dream maker spa has most jets not working.
I changed the pump and motor and topside control. I am not able to control the heat or the jets. I have to unplug it to turn the tun off. Help
the brace that the filter goes over on my dream maker broke in half so I would like it if you guys could paste a link on how to replace it if you have a video please.
i have an x 400. for some reason, the breaker keeps going off. ive had it now for about 1 year. recently thr breaker on cord trips. i reset it and it will run bsck up to 100 degrees or so, whrn igoback to it, breaker is tripped. i am constantly needing to reset it. any reasons why? thx
I replaced the GFI on the plug.