ฝัง
- เผยแพร่เมื่อ 3 ก.ค. 2024
- *TIMING INDEX BELOW, SKIP AROUND!* Here we have the new Dual Filter Eurorack module from Soundforce. It’s an OTA based design that has it’s routes in the later updated Korg MS-20 filter cores. The Dual Filter is a dual independent mono filter where each of the filters can be set to low pass or high pass filter modes with jumpers on the back of the module. Patching one side into the other we can make HP-LP series processing chains, patch in dual mono, stereo or parallel processing and we can also make band pass filters by using both sides.
Check out the Soundforce DCO in this video - • Soundforce DCO // Thic...
Soundforce website - bit.ly/sound-force
TIMING INDEX // SECTIONS
00:00 Hello & video previews
01:20 What is the Dual Filter? Features explained.
02:34 Raw sound demo, LP + HP sweeps
03:50 A quick note about signal levels
04:56 Stereo dual low pass filter
06:03 Stereo dual high pass filter + bass post low end tricks
08:23 Patch your own a band pass filter (crusty ambient)
10:34 Further band pass demonstration and bandwidth fading tricks
13:36 A note about affordability
14:56 Oscillating filter tricks - kick drum synthesis + filter pings
17:07 Dual oscillator filter quirky techno
17:23 Audio rate modulation - new overtones, vocal tones, formant & glottal harmonics
19:00 Musical audio rate modulation sequences for FM synthesis and phase modulation style sounds
20:35 Bandwidth adjusting drones
22:12 Swirling ambiences
** THIS VIDEO IS SPONSORED BY SOUNDFORCE ** they have commissioned the creation of a demo video by me. My videos are demonstrations / overviews and NOT reviews. I aim to show the raw sound and features of a device and follow that with musical examples to not only show you what the device is but also to share tips and tricks and synthesis tips. If you have any questions please just ask.
Subscribe for more DivKid videos: bit.ly/DivKidYTSub
Be awesome! Support me on Patreon - / divkid
/ divkid
/ divkidmusic
divkidvideo.com - เพลง
This is actually pretty amazing. Modulation wise two inputs for each channel could provide for some amazing sounds blending four different oscillators in stereo
Soundforce🖤🔥🖤. That filter is sick!
regardless of price they've done a good job, sounds great.
Thanks, ordered one!
You are magician
Official title - wizard of the audible and modulatory voltage.
... kidding of course!
Sounds really juicy!
yeah it does the filter juice nicely.
Shame it's quite hard to get hold of - I only found a couple of places selling this (in Europe).
Apart from that it looks a very versatile filter. I've been looking at Patching Panda's Moon Phase (stereo filter), which also looks very interesting. However, when you see this, although the two filters are designed differently, you wonder if something like this (also cheaper price) can/could be more versatile in the long run. If Soundforce added some sort of stereo control it would take this module to another level.
Sounds nice for the price. Add a switch between states and you're set. DCO sounds nice too.
Precarious333 Music Ladik makes a module for toggling rear jumpers - perfect for this unit I think.
@@scalebrain643 Yeah, I was thinking the same thing. I already have a couple of those.
switches would be nice, but I appreciate the space used for all the modulation inputs.
@17:36 - Ricky Tinez has entered the chat
the filter sweep?
Sounds great, but wondering why they couldn't have squeezed in a small switch so that there'd be no need to use jumpers?
Cheers! The 12HP are really cramped : instagram.com/p/B4CaD4pBjnJ/? and I didn't want to go to 14HP.
I don't mind the jumpers too much and having the extra inputs and modulation is a good use of space.
@@soundforcenicolas797 What are the effective CV ranges for the cut off and resonance CV inputs?
Can the cut offs track at 1V per octave?
@@TooSlowTube Sorry I missed this message! Cutoff CV inputs range -10V to 10V , Resonance CV input range 0V to 10V. It doesn't track.
@@soundforcenicolas797 There looks like there's ample space between the two Freq or Res knobs to me for a mini-toggle switch(?)! This was, unfortunately, a deal-breaker for me given this was to be my first filter module. Eurorack / modular can already be a PitA compared to a DAW-based approach (which is where I'm coming from) and I do not want to be unscrewing modules from their locations simply to change filter modes! Once I've got an established Eurorack setup, I may reconsider and, having pertinent electronics skills, look into implementing this myself; however, for now, it was simply too much trouble: I just wanna have a setup I can readily make music with and I'm already becoming somewhat disenchanted with the modular hassle factor, the constant compromises and the seeming requirement for nothing to be straightforward or repeatable.
sounds very nice. i’d toss some moog style knobs on this for sure. what brand makes the FILThy module next to the data?
I've certainly swapped knobs out in the past. These feel nice with a not too soft rubbery feel.
Nice demo! Thanks for uploading. Does it track 1v/oct in self oscillation?
It doesn't.
Is -12V marked on the PCB, or are we expected to rely on the cable being wired correctly? I can't see it in the close up of the PCB, at 1:37
Sorry for the late answer! All my modules are using shrouded headers that can only be plugged in the right way. In the event that you are plugging the module if a bad inverted cable, the module is protected against inverted polarity and won't be damaged.
‘Modular’ and ‘Affordable’ strange but v.welcome concept
yeah it's relative but it's a lot of filter for the price especially at it's build and sound quality.
160$ is indeed a good price for this
Yeah really good to come in at that price and offer what this does.
Your obsession with boats, it's all about da waves, in'it? Anywave, are you going to demo the DCO later? Happy holidays and a roaring twenties to you and all of us.
Hi Jonas, DCO video is already done and linked in the description. Here it is - th-cam.com/video/QP8P9VgAIk8/w-d-xo.html
All the best for 2020 for you too and yeah all about the waves ... waves on a canal! haha.
@@DivKid Ah! Great : )
Where can you get these very thin patch cables? Greetz ✌️🤞👍
yellow green and purple thin cables are from Arturia.
Sweeeeeeeet.
They can pry my Jove from my cold dead hands! 😏
well it's not a Roland Jupiter style filter so it's not competing in the same circuit/tonal space for attention. It's also a dual filter not a single filter ... why only have one filter (regardless of this one or not)?
@@DivKid Ok. I'll trade it for a dual jove in 4hp. Need help, running out of space. 😵
Dual Jove in 4HP! haha. No denying Jove is a lovely filter too.