FORD EDGE MISFIRES NEW IGNITION COILS NEW SPARK PLUGS STILL MISFIRES. HOW TO FIX MISFIRE

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ธ.ค. 2024

ความคิดเห็น • 84

  • @AutoRepairGuys
    @AutoRepairGuys  5 ปีที่แล้ว +2

    ⛐ Check out our Garage to see what tools we use and recommend:
    www.amazon.com/shop/worldmechanics
    ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/users/AutoRepairGuys
    ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

    • @sakibudawuda9770
      @sakibudawuda9770 3 ปีที่แล้ว

      Please which shop can I repair my pcm

  • @surrealnumber8166
    @surrealnumber8166 ปีที่แล้ว +2

    Thank you so much for this video! I was really concerned because I had already dumped $3k USD into tuning up my Edge, then this randomly started happening while coasting down the highway.
    I was lucky, all I had to do was disconnect my battery for 30 seconds & it hasn’t misfired since then. Good to know that it’s a faulty ECM and that it can be sent in for repair.
    Thanks again!

  • @metalmonsters8me
    @metalmonsters8me 2 ปีที่แล้ว +3

    U guys saved me thousands with this video. SIA electronics took care of the ECM and I'm on my way again. Thanks so much.

    • @jasonjuarezz
      @jasonjuarezz ปีที่แล้ว

      Was this in the states? and how much did you pay?

  • @LT-ms6je
    @LT-ms6je 4 ปีที่แล้ว +15

    Who repaired ECU?

  • @sedrickharris5535
    @sedrickharris5535 ปีที่แล้ว +1

    Hey guy we need videos on the 2.0 edge spark advanced on cylinder 1,, injectors, spark plugs, coil change, runs great driving but idling has a slight miss..

  • @joehead1350
    @joehead1350 4 ปีที่แล้ว +5

    Was wondering where you sent the pcm to get repaired . Got same problem on Mercury Mariner

    • @metacombs
      @metacombs 4 ปีที่แล้ว +1

      SIA ELECTRONICS, (800)737-0915

  • @harrysosajr8684
    @harrysosajr8684 4 หลายเดือนก่อน +1

    You didn’t move the coil to another plug to verify whether it’s the coil or something else? I have the misfire with a new coil and it follows the coil to the plug i attach it to. how does that conclude the ecm is bad?

  • @lashanacollins2283
    @lashanacollins2283 4 ปีที่แล้ว +8

    Can you share the repair shop you used?

  • @Larry-j9b
    @Larry-j9b หลายเดือนก่อน

    Hey guys, please share the shop or the shop's that will perform a rebuild on the ECM? Thank you so much!

  • @thomasraudabaugh3879
    @thomasraudabaugh3879 2 ปีที่แล้ว +2

    Where can I go to contact them to send my computer system in my car and what was the average price

  • @narcisosonnyagbayani5523
    @narcisosonnyagbayani5523 ปีที่แล้ว +1

    master i ford edge 2013
    rpm up and down while on part with ac or without ac no accelaration? change coil change trottle new spark plug same coming rpm up and down any solotion this problem

  • @keithcampbell4695
    @keithcampbell4695 5 หลายเดือนก่อน

    My car is doing the same thing. I love this video. My question will be, where did you send your ECU to get fixed? Name, number and address.

  • @johneckler534
    @johneckler534 ปีที่แล้ว +1

    Where did you send it too to get it repaired and how much was it?

  • @angelisone
    @angelisone 3 ปีที่แล้ว +1

    Where did you send the ECU for the repair & how much?

  • @youflyibuy
    @youflyibuy หลายเดือนก่อน

    Where did you hook up the volt mter. I didnt see and I dont know. Thx

  • @juanpena1783
    @juanpena1783 4 ปีที่แล้ว +2

    Any updates, about where to send the computer to?

  • @steveslavo4938
    @steveslavo4938 3 ปีที่แล้ว +3

    Can you please tell me where I need to send my computer to get fixed because I am having this exact issue? Also what should I tell them the problem is? Thank you so much

    • @ryanvance9623
      @ryanvance9623 3 ปีที่แล้ว

      If you havent gotten this fixed yet. Circuit board mechanics dp amazing work. And for a good price.

  • @dashtyATG
    @dashtyATG 3 ปีที่แล้ว

    Hy thanks for your time.
    How come you didn't married the key to the ECU?
    im having a difficulty with immo here with a new ecu replaced ford edge 2007.
    Vehicle want stard what to do?

  • @djprengel8334
    @djprengel8334 3 ปีที่แล้ว +8

    Never connect positive battery cable last. Hydrogen builds up in a battery as it charges at the positive post. You risk exploding the battery when it sparks. Always connect positive first.

    • @honcho714
      @honcho714 ปีที่แล้ว

      You sir are full of shit.

  • @Meatnewdadbod
    @Meatnewdadbod 4 ปีที่แล้ว +4

    Is this the same Ford Edge with the same misfire problems that you have been working with the whole time? It started out by replacing the spark plugs the ignition coils the camshaft sensor and the fuel injectors??? And you finally figured out that it was the PCM??? I'm just asking because so far in my Ford Edge I have fixed new spark plugs new ignition coils and have taken it to two shops and one of the shops told me that my PCM is frying. I'm just wondering because you're misfires sound kind of similar to how a mine was. The misfires kept switching up to different cylinders and sometimes going the way and changing. Trying to get this crap fixed without literally killing my pockets and I have already spent almost $500 trying to figure out what's wrong with it and a lot of that is doing the work myself and taking it to two shops and getting Diagnostics done

    • @lh5567
      @lh5567 6 หลายเดือนก่อน

      Same here did you figure it out? This damn car is driving me crazy!

    • @Kyounaso
      @Kyounaso 21 วันที่ผ่านมา

      @@lh5567any updates?

  • @angelisone
    @angelisone 3 ปีที่แล้ว

    2010 Ford Edge Limited AWD is Spark Plug #5 is the center (3:48)? Shop replaced all parts like from this video but misfired P0122/P0174/P0205/P0223/P0305/P2110 with check engine light comes on after 12 miles.
    If Fuel Injector #5 is bad?
    And where is this location?

  • @28drafting
    @28drafting 4 ปีที่แล้ว +1

    Great video!!!

  • @sakibudawuda9770
    @sakibudawuda9770 3 ปีที่แล้ว +2

    Please where can I send my pcm to be without reprogramming

  • @javiermonzon2806
    @javiermonzon2806 2 ปีที่แล้ว

    Is it 2011 Ford Edge 3.5 front-wheel drive had a mis-fire code of cylinder 4? This car has all new plugs, all new coils. A new injector in #5. Had to replace both catalytic converters because they were damaged. New fuel pump. Good compression. Idles good but under a load, i was losing cylinder 5. And eventhough its cylinder 5, it pops and thats why they changed the fuel pump. The car is from Pennsylvania but its in real good conditions; Bodywise and interior, and the engine isnt too bad. I belive it might be the computer. The driver is heating up. What do you recommend?

    • @garrettsmith8
      @garrettsmith8 ปีที่แล้ว

      Did you ever figure out your issue?

  • @baderalazaat2190
    @baderalazaat2190 5 หลายเดือนก่อน

    I want to replace the computer due to a malfunction in the gear shifting. Do I have to match the numbers on the computer, or is it enough to buy a computer for a 2009 Ford Edge?

  • @joshuacarter1554
    @joshuacarter1554 ปีที่แล้ว

    Hey I have 2012 ford edge we just replaced all 6 coil packs few mos ago ... now it seems it's doing it again skipping especially when you press the gas engine light is flashing and you gas kinda

  • @wendisutton9033
    @wendisutton9033 4 ปีที่แล้ว +1

    Can you use a 2011 coil in a 2013?

  • @judithrivera2926
    @judithrivera2926 2 ปีที่แล้ว

    Hello , I replaced my coils and two days after I got check engine on code p0430 can it might be a misfire from new coils

  • @RonComstock
    @RonComstock ปีที่แล้ว

    who do you use to repair pcm?

  • @4WingView
    @4WingView 3 ปีที่แล้ว

    Can you please post link to voltage meter. Also would greatly appreciate link to ford on board computer repair.

  • @josephhannold3739
    @josephhannold3739 2 ปีที่แล้ว +1

    I have a 2013 Ford Edge 3.5 L and I have a P0305 code that just won’t go away! I have replaced the plugs, coils, injectors, o2 sensor, MAF sensor, Purge valve sensor and finally the ECU. I still have the P0305 code coming on. Any suggestions?

    • @yume7z185
      @yume7z185 2 ปีที่แล้ว

      Check the wiring harness

    • @davidely6214
      @davidely6214 ปีที่แล้ว

      Have u fixed this yet having similar issue

    • @Kyounaso
      @Kyounaso 21 วันที่ผ่านมา

      @@davidely6214any updates?

  • @d.b.1419
    @d.b.1419 4 หลายเดือนก่อน

    If you took the battery cables off then It won't show a check engine light because you reset the memory? You will need to run the engine cycles for about 80-100+ miles

  • @jrt7851
    @jrt7851 4 ปีที่แล้ว +2

    Where did you send the computer tobe repaired?

    • @metacombs
      @metacombs 4 ปีที่แล้ว +1

      SIA ELECTRONICS, (800)737-0915

  • @ericcampbell1510
    @ericcampbell1510 ปีที่แล้ว

    Where did you send the computer to get fix?????

  • @jamescollins8148
    @jamescollins8148 หลายเดือนก่อน

    I’ve had 2 different PCMs continuity from pcm to coils. Coils not firing!

  • @shell7998
    @shell7998 4 ปีที่แล้ว

    Hi so took car to mechanic 2011 ford edge it read it was misfiring bad coil just one he said he replaced it and it blew out called said I had to take car to dealer not sure what to do now ?

  • @dontrompas1312
    @dontrompas1312 4 ปีที่แล้ว +2

    I'm just gona sell mine...replaced maf sensor and throttle body and still having problems..lack of power and misfiring...

  • @victorderick1215
    @victorderick1215 2 ปีที่แล้ว

    Hello sir good morning please my ford edge 2007 is not starting since 5 days now but the light is turning on but the car is not starting please sir what will be the problem

  • @dustin5595
    @dustin5595 2 ปีที่แล้ว

    Where did you send your computer

  • @Bassboy1972
    @Bassboy1972 3 ปีที่แล้ว +1

    Replaced my coil packs and spark plugs and sent my computer to the repair shop that’s mentioned and computer was fine. Still getting p0301 code. Running out of ideas to what is causing my intermittent misfires.

    • @ryanvance9623
      @ryanvance9623 3 ปีที่แล้ว +1

      I got the computer fixed and it worked great for a while. Now I have the same code (301). If you have found anything out please comment back.

  • @GoldenStatesGaming
    @GoldenStatesGaming 3 ปีที่แล้ว +2

    I replace ignition coils, injectors, and repaired PCM and still have a missfire.

    • @Dxfactor24
      @Dxfactor24 3 ปีที่แล้ว +1

      Same here!!!

    • @WildDisaster
      @WildDisaster 3 ปีที่แล้ว +1

      Check the cylinder compression. You could have a broken valve.

    • @steventmln1st
      @steventmln1st 2 ปีที่แล้ว

      same here.i have a 2007 MKZ and I gave it gas to pass a car and it popped could so , I replaced all plugs and coils and pcm ..this year 2007 has tsb..says to replace everything so I did..still runs rough.chsnged massive air flow ..So I'm thinking it's in the wires as I'm getting po 305 and po174 .

    • @steventmln1st
      @steventmln1st 2 ปีที่แล้ว

      and my compression is good

    • @jalisahorton
      @jalisahorton 7 หลายเดือนก่อน

      Fuel pump

  • @stephenanderson1944
    @stephenanderson1944 2 ปีที่แล้ว +1

    Here's one for anyone who could help, replaced plugs coils AND PCM and still misfires at idle only up to 1500 rpm or cruising in 6th cylinder balance test shows cylinder A(1) showing wayyyyy off, cylinder B(2) is about half the other cylinders

    • @RichardRLeal
      @RichardRLeal 2 ปีที่แล้ว

      Pcm? Or ECM?

    • @stephenanderson1944
      @stephenanderson1944 2 ปีที่แล้ว +1

      @@RichardRLeal PCM, the one that controls the engine which technically is either one PCM or ECM

    • @JesusisLORD77778
      @JesusisLORD77778 ปีที่แล้ว

      Did you ever figure this problem out? Having a similar issue myself

    • @stephenanderson1944
      @stephenanderson1944 ปีที่แล้ว +2

      @jesusislord yes actually, part of my wire harness was laying on the engine and had melted the signal wire going to the coil, it was passing electricity through the aluminum valve cover to complete the circuit, had plenty of wire left so I chopped new ends and soldered it together haven't had an issue since

    • @JesusisLORD77778
      @JesusisLORD77778 ปีที่แล้ว

      @@stephenanderson1944 thanks a lot I will check mine out too

  • @sway3699
    @sway3699 4 ปีที่แล้ว +3

    We changed the cylinder one fuel injector & fixed everything got rid of the shaking

    • @brrusso2943
      @brrusso2943 3 ปีที่แล้ว

      What if I change the injector and still the same

    • @sway3699
      @sway3699 3 ปีที่แล้ว

      @@brrusso2943 more then likely you changed the wrong one so a injector still needs replacing

    • @ChrisB-cx6td
      @ChrisB-cx6td 3 ปีที่แล้ว

      @@brrusso2943 get a good scanner

    • @ChrisB-cx6td
      @ChrisB-cx6td 3 ปีที่แล้ว

      Also had the same issue and fix

    • @mannymartinez7571
      @mannymartinez7571 3 ปีที่แล้ว

      Po301 2013 explorer after plugs ND coil change. Could it be injector. With out codes

  • @sakibudawuda9770
    @sakibudawuda9770 3 ปีที่แล้ว

    Please can someone help me where to fixed my pcm

  • @jeremyvanwinkle5053
    @jeremyvanwinkle5053 8 หลายเดือนก่อน

    Changed plugs wires coils injectors and new computer still misfire

  • @icefishinnhnewhampshire7688
    @icefishinnhnewhampshire7688 5 ปีที่แล้ว

    Hello please help anyone I cant find the link to the place he sent his pcm to to have it repaired with out programing

    • @justinbowles7086
      @justinbowles7086 5 ปีที่แล้ว +1

      Did you ever find out where he took the computer to?

  • @keithcampbell4695
    @keithcampbell4695 5 หลายเดือนก่อน

    My #2 COIL KEEPS MELTING.

  • @johnstahl8413
    @johnstahl8413 3 ปีที่แล้ว

    You can send you computer to “ Circuit Board Medics”. Ciruitboardmedics.com

  • @judithrivera2926
    @judithrivera2926 2 ปีที่แล้ว +1

    Hello , I replaced my coils and two days after I got check engine on code p0430 can it might be a misfire from new coils