Just did this to my ZX12R this weekend. Amazing how much exhaust is flowing out of the pipe now. D Performed a test ride on it, i didn't notice any problems or major performance gains, at the speed i was going. I assume that at much higher levels of speed, hopefully there will be a level of improvement. I think i need to get it flashed or pc5 on it. It has a k&n air filter as well, so even with fuel injection i might be running lean maybe...
I like to be seen too.. my only black bike is my Aprilia RSV.. my Fireblade is red/white, GSXR classic white/blue.. and both my Kawasaki’s are green, ZX12R & ZXR750 H2 💚 I have a full titanium Akrapovic exhaust on my ZX12R.. sounds plenty loud enough, with some crackling pops on the overrun 👍🏼
Hi bro! I also have a 2002 zx12r and there is the same mesh in the muffler that you removed from there with a drill. Do you know if this will affect the quality of the mixture and the operation of the engine? Wouldn't the mixture be poorer without it? I already want to take off my rs3 and remove this grid))) Just like you. Has your engine warmed up more after removing the grid?
thats just a catalytic converter for pollutions. Removing it has no effect on engine performance, or it might operate a little bit better because the engines were designed to be used without the catalytic converter.
It would have been better to properly demount the whole exaust line. Now you have all the metal chips lying in there. Yes, of course with pressure most will come out again but still 😅
It's not a baffle it's the cat, the baffle lives in the can if it has one
Just what I was looking for. I have the same muffler on my Suzuki rf900r and will be performing the same mod. Thank you!
Just did this to my ZX12R this weekend. Amazing how much exhaust is flowing out of the pipe now. D
Performed a test ride on it, i didn't notice any problems or major performance gains, at the speed i was going. I assume that at much higher levels of speed, hopefully there will be a level of improvement. I think i need to get it flashed or pc5 on it. It has a k&n air filter as well, so even with fuel injection i might be running lean maybe...
I like to be seen too.. my only black bike is my Aprilia RSV.. my Fireblade is red/white, GSXR classic white/blue.. and both my Kawasaki’s are green, ZX12R & ZXR750 H2 💚 I have a full titanium Akrapovic exhaust on my ZX12R.. sounds plenty loud enough, with some crackling pops on the overrun 👍🏼
Lucky you like it!
Im a new to the zx12r keep making these videos! I have the same exhaust ill probably do the same thing to mine now!
Hi bro! I also have a 2002 zx12r and there is the same mesh in the muffler that you removed from there with a drill. Do you know if this will affect the quality of the mixture and the operation of the engine? Wouldn't the mixture be poorer without it? I already want to take off my rs3 and remove this grid))) Just like you. Has your engine warmed up more after removing the grid?
thats just a catalytic converter for pollutions. Removing it has no effect on engine performance, or it might operate a little bit better because the engines were designed to be used without the catalytic converter.
It would have been better to properly demount the whole exaust line. Now you have all the metal chips lying in there. Yes, of course with pressure most will come out again but still 😅
I’ll just drill a little bit …. I thought like only 3 or 4 then you just banged on it ha ha
💯%😂
Dumb move remove the exhaust tip with a Allen key and take out a peice from there 5min job😊
Thank you for your dumb comment but I like it just the way it is.