@@andrewbodey5025 I can so I went on amazon and got a 3 filter set up I’ll do a short video of my compressor set up soon I gotten this question a lot 👍🏾
I'm glad the Am-Tech clear coat worked out for you. Man you better stop spitting on those people car lol If the customer watches your video and see you spitting on his wife's car he's coming to kick your A$$ 🤣🤣 Nice work. Clean clean 👌🏼💪🏼
dang I didn’t think about that and he show watches my channel too 😂😂😂 but thank you man yes that Am- Tech clear is definitely starting to become one of my favorite clear coats it definitely rivals speedokote smr 135 far as easy of use but am tech got that shine though
@@thetriggerman954 I gotcha I was definitely wondering if y’all did or not. but it probably would work good for y’all especially with it being humid there
You got the skill set to make any clear coat look good man . Dont get choked up on 200$ clear coats for diy work , side work, ect ect . I almost never whip out the smr32 on work like that. When im mobile / doing side work its almost always the ss1150 and gets the same gloss When you own your own company, own your own body shop from the good choices you have made in life , and dont have a boss paying the material bill, the 75$-98$ smr135/130/1150 works just as good(have recent video on this ) . Its award winning / top 10 on every single paint site for a reason . Keep gunning bro 🥳 And btw the soda spit adhesion promoter thing is TOTALLY A JOKE 🤣🤣🤣 but tbh for body work it works fine.
@@speedokoterefinishnetwork4937 yes that 1150 works real good for what it is and yes I had to do the spit thing 😂😂😂 but Ima listen to my man Triggerman and probably not do that before i get beat up by my customers 😂
@@mississippiwrenches295give your customer what they pay for. No matter how much the material costs. Your customers are coming to you for a good job They don't come to you looking at you as a DIY guy. This guy is just trying to collect a steady commission off of you for acrylic clear that fades in a few years. New Lexus deserves good lasting materials.
@@mississippiwrenches295 iv actually had people iv done cars for ASK me to spit on it before paint 🤣🤣 said they wanted the Marco touch. Do what works best for your customers bro . If you work for someone else definitely don't do it ! You will get fired 🤣🤣
@@mississippiwrenches295 but yea bro spit thing was all a joke. We clean our cars with 2 rounds of foam cannon, and the speedokote pre clean . That is one thing I hide off camera is the fact after I spit on something I usually go back over it with the professional cleaner 🤣🤣
Okay nice shop mechanic you do perfect repair, get it done and right the first time what counts, blessed.
Thank you so very much 🙏🏾 I try to do the best I can
Really good job. Hey can you give me any details on what you did to get clean air from you air compressor?
@@andrewbodey5025 I can so I went on amazon and got a 3 filter set up I’ll do a short video of my compressor set up soon I gotten this question a lot 👍🏾
@@mississippiwrenches295 Thanks, job came out really clean.
Looked like success too me good work
@@stevesummers4266 thank you very much 🙏🏾
I'm glad the Am-Tech clear coat worked out for you. Man you better stop spitting on those people car lol If the customer watches your video and see you spitting on his wife's car he's coming to kick your A$$ 🤣🤣
Nice work. Clean clean 👌🏼💪🏼
dang I didn’t think about that and he show watches my channel too 😂😂😂 but thank you man yes that Am- Tech clear is definitely starting to become one of my favorite clear coats it definitely rivals speedokote smr 135 far as easy of use but am tech got that shine though
@@mississippiwrenches295 😎🤜🏼🤛🏼
@thetriggerman954 I was wondering do the shop you work at do y’all use water borne
@@mississippiwrenches295 nope solvent. I've actually never used water.
@@thetriggerman954 I gotcha I was definitely wondering if y’all did or not. but it probably would work good for y’all especially with it being humid there
You got the skill set to make any clear coat look good man . Dont get choked up on 200$ clear coats for diy work , side work, ect ect . I almost never whip out the smr32 on work like that. When im mobile / doing side work its almost always the ss1150 and gets the same gloss
When you own your own company, own your own body shop from the good choices you have made in life , and dont have a boss paying the material bill, the 75$-98$ smr135/130/1150 works just as good(have recent video on this ) . Its award winning / top 10 on every single paint site for a reason .
Keep gunning bro 🥳
And btw the soda spit adhesion promoter thing is TOTALLY A JOKE 🤣🤣🤣 but tbh for body work it works fine.
@@speedokoterefinishnetwork4937 yes that 1150 works real good for what it is and yes I had to do the spit thing 😂😂😂 but Ima listen to my man Triggerman and probably not do that before i get beat up by my customers 😂
@@mississippiwrenches295give your customer what they pay for. No matter how much the material costs. Your customers are coming to you for a good job They don't come to you looking at you as a DIY guy. This guy is just trying to collect a steady commission off of you for acrylic clear that fades in a few years. New Lexus deserves good lasting materials.
@@mississippiwrenches295 iv actually had people iv done cars for ASK me to spit on it before paint 🤣🤣 said they wanted the Marco touch. Do what works best for your customers bro . If you work for someone else definitely don't do it ! You will get fired 🤣🤣
@@mississippiwrenches295 but yea bro spit thing was all a joke. We clean our cars with 2 rounds of foam cannon, and the speedokote pre clean . That is one thing I hide off camera is the fact after I spit on something I usually go back over it with the professional cleaner 🤣🤣
@@speedokoterefinishnetwork4937 yes 😂😂😂 the Marco spit shine 😂😂