I want to thank VQC for a superb design! It works perfectly, no leaks. We had lots of fun with just 7 to 10 pumps. It rocks the sky!! Fun family time! Lots of giggles and axtion! Try it today! Materials are not expensive. 👍👍👍
In order to stop losing water when you put the rocket on, you could just flip the launch pad and then put the rocket on, then flip it back so water will not leak . That’s what I did.
No creo que me respondan pero aquí va, alguien me podría decir que fue lo que uso para hacer el sistema de frenado? Esa cosa para que no se le salga ni el agua ni el aire
Always dry fit the PVC pipe before applying glue, use a magic marker, make a mark on each piece where it lines up. I have assembled lots of PVC and this little trick lines up everything flush, no leg or other pipe not lying flat, nothing out of line. This glue can set very quick, before you can get it lined up correctly, trust me that ain't good.
you made a good model any way....thanks for the information. We made a water rocket with a bottle which have the correct aerodynamic structure. And won first runner up in national level competition held at NIT Catlicut.
Hi! I was hoping to make this for my aviation/space class this week, do you have the specific measurements for the PVC pipe? I know you mentioned that you linked a video that gave the specific measurements, but I wasn't able to find it. Thanks for the great video!
The dial on the pump I was using was definitely inaccurate. I would say it was between 40-60 psi. I tried to max it out without losing too much water before releasing the rocket.
For my rocket I used a 5ft pvc pipe that I cut into 4 peices the main pipe is 2 ft the ones to the side off of the t are 1 ft each and then at the other end of the main pipe I have an elbow joint connected to a 5 inch pipe.
Hi Abbie! In the video description there is a link to a video that has a more detailed list of the materials used as well as the lengths of the PVC pipe. A tire valve is what's used to pump air into the bottle (through the PVC stand). I was able to find that at an auto part store. I think I went to AutoZone for that, but any auto store should have it.
This is a fantastic launcher but is there another option besides using a cut 2-liter soda bottle for the "springboard"? In the past, the string has cut through the springboard making it useless. I have been trying to think of an alternative - ideas?
i used a spring from a sprinkler head. works great, the only issue now is that the paracord ,that use to pull the spring down is somewhat use less so i do have to manually pull the lock down
i also used a cap from Califia Farm milk on the lock to keep the spring from passing through the lock. Drilled a hole to pass the pvc though and it's perfect. I have to think about how to get enough force to pull the spring down without having manually pull on it. I get pretty soaked every time.
You can fashion and rig a "U" Clip made of clothes hanger wire. You still need the 1-1/2 PVC Coupler to stick the bottle neck into.. research others u Tubes.. you'll find the U Clip method too.
I'm not sure if a bicycle tube will work or not. I'm sure if the connection is air tight and the hole drilled into the PVC cap is the same diameter as the valve your planning to use it should work. I used a valve I found at AutoZone.
I was wondering when someone was going to say something! While editing I didn't see anything wrong with it, but I showed the video to a couple people and they said the same thing!
Hi, Araj Dhaka! In the video description there is a link that goes through all of the measurements as well as materials. I'll post it here as well.. th-cam.com/video/FV2nrifqzX0/w-d-xo.html
Haziq Mirza some water spills out when transferring the bottle onto the launcher. Once the bottle is on, the seal is air tight almost perfectly. The pipe extends passed the water level inside the bottle ensuring no excess water goes into the launcher as well. Over time and from the air pressure the plastic bottle may expand and compromise the seal.
Tubería de PVC de 1/2" (x3) Tapa de PVC de 1/2" (x4) Acoplamiento de 1 1/4" (x1) Abrazadera de manguera de 3/4" (x1) Imprimador y Cemento Cortador de tubos de PVC Bridas Válvula de aire para neumáticos (se puede encontrar en una tienda de automóviles) Cordel de nailon Bomba de aire con indicador
We made a water rocket with a bottle which have the correct aerodynamic structure. And won first runner up in national level competition held at NIT Catlicut.launcher also
I want to thank VQC for a superb design! It works perfectly, no leaks. We had lots of fun with just 7 to 10 pumps. It rocks the sky!! Fun family time! Lots of giggles and axtion! Try it today! Materials are not expensive. 👍👍👍
Hii I want to make it for physics project And it's looking very complicated
Great video with the exception of one thing , the horrible Alvin and the chip monks sounding horrible music .
AHHHH thats so true when its playing for 5:56 mins :sad
AHHH that is so true espically when its playing for 5:56 mins
What is the size of the cut PVC pipes? It's not in the description
Would love to buld this for my grand daugther...any pdf files I can get for accurate information?
good video! I just wanted to ask about the dimensions of the pvc tubes, it's for my school proyect :')
How long are the PVC tubes?
Idk
In order to stop losing water when you put the rocket on, you could just flip the launch pad and then put the rocket on, then flip it back so water will not leak . That’s what I did.
There's a thing called a check valve...
@@Shastavalleyoutdoorsman😂
Qqqqqq999
To tell the truth it was fantastic, I would like to know if it has any measure, specifies the platform or is it how one wants to do it
Please mention the length you r cutting
anyone else here from a school project?
Umm kinda flunked this rocket 😢
More like university project…
lol
Me!😅
Me!😅
What is the dimensions of PVC pipes.
Are there specifics on this launcher wrt measurements and products
Pls provide us with the exact measurements... There is no link in the description. Please give reply
No creo que me respondan pero aquí va, alguien me podría decir que fue lo que uso para hacer el sistema de frenado? Esa cosa para que no se le salga ni el agua ni el aire
Yo estoy implementando teflón , después te diré si me funcionó
We are doing bottle rockets at school and I had so much fun I want to build my own launcher so I can keep doing this
I've just watched a few of these and that's got to be one of the best engineered launcher hacks I've seen. Thanks! How durable is it?
Axcc of CV bvbshfkĺlllf BB cghvvvhabĝzfc+6789hg
Cbbvxfjxbkv.
Always dry fit the PVC pipe before applying glue, use a magic marker, make a mark on each piece where it lines up. I have assembled lots of PVC and this little trick lines up everything flush, no leg or other pipe not lying flat, nothing out of line. This glue can set very quick, before you can get it lined up correctly, trust me that ain't good.
Hello, what is the size of pvc pipe?
you made a good model any way....thanks for the information. We made a water rocket with a bottle which have the correct aerodynamic structure. And won first runner up in national level competition held at NIT Catlicut.
Que botella era?
What are the lengths of the PVC?
Do you have digital blueprints for this?
One thing when you put the rocket on the pipe won’t the water go inside the pipe please explain ?
So when you building the water rocket
Very cool !!!!
Great looking design! The music however made me want to drive off a bridge… I resisted the urge.
This was super pro.
Hi! I was hoping to make this for my aviation/space class this week, do you have the specific measurements for the PVC pipe? I know you mentioned that you linked a video that gave the specific measurements, but I wasn't able to find it. Thanks for the great video!
This video is pretty good. There are 3 separate videos to follow.
th-cam.com/video/FV2nrifqzX0/w-d-xo.htmlsi=De2GknzD13p6v4au
need proper dimension ?
What PSI did you launch at?
The dial on the pump I was using was definitely inaccurate. I would say it was between 40-60 psi. I tried to max it out without losing too much water before releasing the rocket.
Es muy importante esa Balbula de ahire ? Ósea la calidad
no realmente pero entre mas grande la bomba creo que sale con mas potencia
After applying the PVC solvent, is the launching pipe is able to move in any ANGLE or it gets permanently joint to the vertical angle.
Permanent... it's all glued else BOOM
The dimensions are 2 feet and 1 feet
sure???
Excuse me, what are the measures of the cortes.respondame rapido please
What's the measurements for the cuts?
For my rocket I used a 5ft pvc pipe that I cut into 4 peices the main pipe is 2 ft the ones to the side off of the t are 1 ft each and then at the other end of the main pipe I have an elbow joint connected to a 5 inch pipe.
My design is different then his so I don’t know exactly what this guy in the video did but mine seems to work fine
"Waw" Its a most 5 star video.
Whats da dimensions of thw pvc pipe
It's very cool
What are the pvc lengths? And what is the black thing on the end of the pvc called?
Hi Abbie! In the video description there is a link to a video that has a more detailed list of the materials used as well as the lengths of the PVC pipe. A tire valve is what's used to pump air into the bottle (through the PVC stand). I was able to find that at an auto part store. I think I went to AutoZone for that, but any auto store should have it.
Voth Quality Creative I didn’t see the link to the video with lengths.
@@vothqualitycreative there's no video
This is a fantastic launcher but is there another option besides using a cut 2-liter soda bottle for the "springboard"? In the past, the string has cut through the springboard making it useless. I have been trying to think of an alternative - ideas?
i used a spring from a sprinkler head. works great, the only issue now is that the paracord ,that use to pull the spring down is somewhat use less so i do have to manually pull the lock down
i also used a cap from Califia Farm milk on the lock to keep the spring from passing through the lock. Drilled a hole to pass the pvc though and it's perfect. I have to think about how to get enough force to pull the spring down without having manually pull on it. I get pretty soaked every time.
Your machine is perfect, but Please tell me how You make the bottle😊😊😊
X2
Good video but it could be improved considerably by not having the 'music'.
what is the material in the middle of the zip ties??
I thinks thats a metal hose ring
can you do it without water inside
+Jason Poling absolutely! I’m not sure how high the rocket will go or what the direction will be though.
Can you tell me sir how much metre it will go up
+JIVESH RAJPUT I don’t know the exact height the rocket will achieve. The rocket in this video made it between 21 and 30 meters. (70 to 100 feet)
@@vothqualitycreative thanks sir
Thank you :> ♡♡
How much water did you put?
Nice! 5:20
Such fun!
Lenght of first cut pipe
Makes no sense at all. What holds the bottle in place while pressure is put to it?
The zip-ties
Great work.
What are the measurements of PVC pipes? Can anybody help me?
I think 20 cm length of PVC pipes
can only zip tiles can hold the bottle please tell I don't have things
You can fashion and rig a "U" Clip made of clothes hanger wire. You still need the 1-1/2 PVC Coupler to stick the bottle neck into.. research others u Tubes.. you'll find the U Clip method too.
AMAZING
Hi.
Will a bicycle tube valve work fine?
I'm not sure if a bicycle tube will work or not. I'm sure if the connection is air tight and the hole drilled into the PVC cap is the same diameter as the valve your planning to use it should work. I used a valve I found at AutoZone.
Yo estoy usando válvula de bicicleta y está cumpliendo su función
Oye una pregunta que medidas le diste a los tubos de pvc
yo tambien quiero las medidas amigo
Our teacher sent us this vid for school project 😂
how long should we cut the pvc pieces?
It does not matter
The music is horrible
I was wondering when someone was going to say something! While editing I didn't see anything wrong with it, but I showed the video to a couple people and they said the same thing!
You know i like it
Lakhan nice make I will make
great video but music is annoying as balls
It really takes away from the quality of video, in my opinion.
thanks bro you are help me very so
Sir,plz tell me all equipments name.
Very cool
Hi I was wondering if I can make this for my science fair
Go for it! Thanks for watching!
@@vothqualitycreative thank you
Amazing!!! i got one question: height reached? :D
what are the material ?
Alguien me puede decir el nombre de la música de fondo por favor?
very good
Amazing
please tell me abuot the measurement of pipe
Hi, Araj Dhaka! In the video description there is a link that goes through all of the measurements as well as materials. I'll post it here as well.. th-cam.com/video/FV2nrifqzX0/w-d-xo.html
Instead of a valve, what can I use?
n҉i҉c҉e
amazing
me and my friends made this in bazooka version
nice
Won't the water from the bottle spill out??
Haziq Mirza some water spills out when transferring the bottle onto the launcher. Once the bottle is on, the seal is air tight almost perfectly. The pipe extends passed the water level inside the bottle ensuring no excess water goes into the launcher as well. Over time and from the air pressure the plastic bottle may expand and compromise the seal.
@@vothqualitycreative
I do not know which part you made the seal. Is it where you heat and compress the pipe ???
Super
beautifull but the video did not record well, ardly see the rocket
Alguien sabe las medidas del tubo PVC?
1/2". El pedazo de tubo que utiliza sobre un pedazo de botella es de 1".
Muchas gracias @@notdabo
No pone los materiales 😭😭😭alguien me los puede decir
The materials are in the description luv
I can't understand 😢
mi maestro de fisica me dejo calcular la altura maxima de eso creen que es logico que haya llegado a una altura maxima de 600m?
Eso es mucho o poco?
@@dianafloresandaluz9944mucho
Nuestro prototipo con agua la altura máxima es de 5 m, obvio con la presión adecuada
Cuáles son los materiales para ese experimento
Tubería de PVC de 1/2" (x3)
Tapa de PVC de 1/2" (x4)
Acoplamiento de 1 1/4" (x1)
Abrazadera de manguera de 3/4" (x1)
Imprimador y Cemento
Cortador de tubos de PVC
Bridas
Válvula de aire para neumáticos (se puede encontrar en una tienda de automóviles)
Cordel de nailon
Bomba de aire con indicador
atleast tell us what the measurements are 🤦🏽♂️
Quais são as medidas dos canos?? Muito topp o foguete
Ta na descrição
hermoso trabajo,pero no da las medidas de los tubos ,más explicacion por favor ,y si lo están disculpe está todo en inglés no entiendo nada 😊
Me caga que no digan que utilizaron y de que medidas
Ummmmm measurements of the pvc cut plsssssss.
We made a water rocket with a bottle which have the correct aerodynamic structure. And won first runner up in national level competition held at NIT Catlicut.launcher also
Just so everyone knows, don't use primer it will only make your pipe soft, it's code for like 2 inch main line repairs, no need on something like this
Man + Soft Pipe = 🎁
wt's the blue colour gum
It is Oatey PVC Primer.
I think is very hand but i will try to do
Its hand all right.
Awesome
OMFG THATS WHAT I DO
Explain!!
My ears are hurting
Yes
finally 666 people is here is the demon number
also im ib 2030 because i time travel
thanks sir Ji
Anjay mantep bener
Asu
Good
How much psi I need??
My pump wouldn’t give me an accurate read but I maxed it out. I think it was between 40-60 psi.
Keaton Fork
e muito tope altura que voa o voguete