SolidWorks Weldments 101 - Simple Table
ฝัง
- เผยแพร่เมื่อ 25 ก.ค. 2024
- Modeling up a Simple Table using SolidWorks Weldments is easy. This video will take you through creating a 3Dsketch, downloading the latest Weldment Profiles off the SW website (via Design Library), adding them to your folder, and then using them to create a simple Table. Trimming and Extending, and End Caps are also shown. Then finishing them off using a Weldments Cuts List, and a Bill of Material.
- วิทยาศาสตร์และเทคโนโลยี
![ฉันจะ "แพรี่" ให้หมด - ผู้แข็งแกร่งที่สุดในโลกอยากจะเป็นนักผจญภัยให้ได้ - ตอนที่ 04 [ซับไทย]](http://i.ytimg.com/vi/PvmuP8y9IPk/mqdefault.jpg)
The amount of mileage out of this 15 minute video is phenomenal. You rock!
EXCELLENT! You're a natural instructor. Everything we need to know, what to avoid, where to find, how to do, all at the right pace. Thank you, thank you, thank you.
Fantastic! Incredibly informative. Included a TON of great information, especially the little tricks to coax SW to give you what you want. Love the properties tips for BOM description and getting the auto balloons to switch back to the weldment cut list. Learned some things I never knew. Thank you!!
Thank you! I worked in Solidworks and with weldments for about 2.5 years but not since 2013. I'm trying to refresh myself on it before an interview. This was perfect.
WHAT A CHAMP!!!! THANX MADE MY LIFE SO MUCH MORE EASIER.
Thank you your just the right speed and concessive direction
Exactly what I was looking for. Thanks for the clarity and especially for not assuming that we're all at an advanced level.
Excellent! You're the best tutor have ever listened to in you tube. Helped alot
Great video, very helpful and well developed. Thank you. Now, I'm going to go check out your other SolidWorks Vids!
Amazing, this could've saved me a lot of time over the years. Thank you
If you kept it going till now you have all the respect that I can give
This VDO is cover all necessary thing I want.
Thank you for good tutorial.
Excellent, simple but full of information needed.. thank you !!!
Very good tutorial. Got me started right away. Thanks a lot!
I'm a new student from Tunisia 🇹🇳i found u in instagram and now i'm following you on youtube. nice job thanks you so much
Excellent lesson. Learned some nice techniques here. Many Thanks !!..
Thank you so much for all these tutorials bro. So much valuable knowledge
Great video and really helpful! I couldn't get a grasp on how the setuper works but it's all clear now.
Haven't used SW yet. I was using Frame Generator in Inventor which is similar. Nice tutorial. Thanks for posting.
THANK YOU!!!! you actually guide your viewers through soft, unlike so videos that rush the whole tNice tutorialng or talk too fast.
This video was extremely helpful, thank you. :)
Excellent tutorial! Thanks a million.
Very helpful, thanks! I thought I was crazy for putting each leg on a table in a separate group in a Structural Member feature, but it looks like that's how it goes.
Also good to see that eventually you do have to use trim/extend sometimes if corner treatments don't come out right even after trying different settings on individual corner treatments.
Learned about Weldments at a recent SolidWorks User Group meeting. Insanely useful tool for so much more than actual weldments. I think many could be helped by using this feature.
Really nice video to get started in weldments...thank you very much... Keep rocking
That was incredibly helpful. cheers!
Nice job!!!!! Pretty clear explanation!!!!
All the way from Mexico City, thanks a lot!!!
Great tutorial! Thanks!
this video helped a lot, thank you
Great tutorial, thanks.
thanks for your good tutorial
That was a very good video tutorial. Thanks
Excellent video. Very helpful. Thank you
So simple and detailed video, it's now going to help to start working wid softsoft!!
Very helpful, a lot of information.
Awesome!! Helped me alot
Thanks man! subbed for the instructions!
cool. solved my problem. Nice work
That was great. Thank you.
awesome tutorial mate.
Perfect!
Muito bom o seu conteúdo parabéns!!!!!
Aweso tutorial bro! I like how you gets down to bus
aah, i just got into making soft rn and tNice tutorials is so helpful and your voice is so sootNice tutorialng btw! thanks for tNice tutorials tutorial
Very good and funny videos bring a great sense of entertainment!
Very helpful. Thanks!
Hi,
at the moment I am designing an overhead crane beam. is it possible to analyse the effect from moving crane on the beam?
Thank you
tnxs ,that was lots of help to me.in other words :a complete intro to weldments...
This video has been very helpful to me. I'm building a similar table for my shop. Can you point me in the right direction to model a piece of 1/8" steel for the top? I created a plane on the top surface, but I can't seem to locate the table top to the table since it's on a different plane.
You just unconfused me; thanks!!!
love it thanks!!
excellent. thank you.
much appreciated , Thanks
Wery nice tuturial!!
Great video, I don't seem to be able to tab the legs to the front plane, am I missing a setting?
great work
Thank you for teach this.
ProgressionSupport,
So I have just installed Solidworks 2016. On my previous version it was easy and simple to use my weldments profiles. I do understand how load your own profiles or any kind.
Now the problem I run into is: When you right click on your tab you see your options: Assemble, Layout, Sketch, Evaluate and so on... And for some reason, and maybe I did something when I first started to use solidworks, it doesn't give me option of adding weldments tab? So I can't use it at all?
Am I supposed to do something in setting to be able to use this feature? Or maybe it's my installation was done wrong?
Please help help!!
Thanks,
Thanks for the help.
A very good video, I'm just a beginner in SW and I had some issues, in first tab, the pieces description, it did not show anything, it was empty. Does anyone know how to link the information or fix it? Thanks
How did you convert the cross hair to pencil of your mouse cursor in Solidworks16?
When i select the line at 6:51, it creates a plane and then some square like thing, it looks really weird, How do i fix this?
it helped a lot
hi man nice video but if got solidworks 2016 and when i want too ad the folder into the original folder is difficult because
the folder layout is different how could i fix this
This looks so much better than inventor. I have only begun learning inventor but I think I wish I had solidworks instead. Can you give any advice about which is better? I have been drawing in AutoCad Mep for 10 years and used Autocad for over 20 years. I'm just looking for a new software to learn and wondered which is better. Any advice would be much appreciated. Thanks for video.
In my opinion inventor and solidworks are very similar! But in the industries tday they use more solidworks then inventor. Solidworks is much easier to learn then inventor.
You just deserved much more thab "just" over 300k subbers.
Good tutorial
i couldn't find the weldments profile folder in the English folder do i have to create one ?
What do you think of Autodesk Inventor? I am trying to decide which one to work in.
I design lots of models in Maya but would love to see them in this program so I can have the materials, stress points etc...
ty u help me so much
dude tNice tutorials is super good! subbed
wery good and nice
I love soft soft so so so so much!
thank you
What is the tap k ? Which one ????? 1:05
I was surprised how understandable tNice tutorials tutorial is, thanks!
Earned a sub from me! Great video!
Ty it was nice ❤️
anyone know where i can download more weldment profiles? i need smaller tubing
Can you give the each piece an individual part number?
I know this is gonna sound like a dumb question, but right after you resized your table.. you clicked your mouse and dragged the table into view. How did you move the camera without changing the angle of your camera. I know this is a dumb question, but I just can't figure it out. thanks in advance.
Thanks
awesomeeeeeee. Thanks
how do you get the grid on the plane?
very good！
I keep coming back to those basics videos because I STILL don't know how to properly use the software. I'm gonna cry
Very Nice!!! Like Like
Cool!
lmao i was tNice tutorialnking the sa but don't give up! We got tNice tutorials!
Very good
tnx a lot!!
Thank you, I was drawing 2 hours haha
nice
verry good sir
impressive,very well said,tNice tutorials is what I need to learn soft soft,your the bes n
thanks
If tNice tutorials isnt the most true tNice tutorialng ive ever read
Thanks you ...
GREAT
u can share your folder solidworks of table plz??? thanks.