2011 Volkswagen transporter T5 pioneer Install

In today’s video I will be running through how to install a double din stereo into a 2011 VW transporter. I will be installing the pioneer SPH-DA130DaB using the fascia plate and the wiring harness from Connects2 I will leave a link to the website below
Connects2
connects2.com/
Pioneer
www.pioneer.eu/
Instagram
aud10_installer
thank you so much for tuning into my video
Stay tuned and don't forget to stick around for more car audio uploads. if you click the little bell button next to where you have subscribed it will then send you notifications for when I upload in the future.

[@johnvanreijn3591]

Even though the sound is poor, I’ve followed this and my stereo is tip top, one bit to be mindful of which I struggled with was running the switched live/ignition piggy back wire.

[@studiosys]

What tool do i need and how to extract the unit ? I bought a van with this same PIONEER unit , SPH 160 , i want to attach a rear view camera and my RHS speaker dosnt work , i went to Halfords and bought a " pioneer " pair of LEVERS , but cannot get the blighter out ?

[@robcon8179]

Hi , what fuse number did you piggy back into ? Please

[@arturdzido7112]

please advise how you connected separate power to fuse box and where did you connect it on the pioneer itself I have similar model so wonder whether it should connect to battery (yellow cable on connector) or ACC (red cable on connector) and what should be the fuse. thx

[@vic234able]

How did u get steering control to work plz

[@paulhoffmann1278]

Can I ask did you connect the green parking brake cable to the handbrake?

[@paulahamilton7290]

Hi what surround did u use

[@vincentscully9786]

Great video. Have you ever done a Kia Sportage and if so was it easy enough?

[@marksutton89]

Brilliant video thanks, just fitting the 160 mode to my 2011 t5 Is there a guide connecting the power I can’t seem to pass the cable to the fuse box

[@electrathewonderdog]

did you ever get these details, I might buy one for my t5.1

[@TommyNovaGsi]

Ignition live from fuse box just get taped in to the normal red live on the harness ?

[@tylerraines3451]

Hi mate were can i get that usb mount from ? I ordered the same stereo but need to get a usb socket mounted with a usb end on the rear for apple car play

[@keybmx]

Did you ever find one ? Want the same !

[@MrBrumbrum73]

This is the best installation tutorial on TH-cam. Thanks for making time to create it. I just need to know one thing. What rating fuse do you use on the piggyback fuse holder? I am guessing that it is a 2 amp fuse? And does the fuse holder plug in to an an empty space in the fuse box? Thanks Andrew.

[@amandamcallister6664]

Did you get this sorted mate as I'm wanting to know the same

[@MrBrumbrum73]

@@amandamcallister6664 no sorry. I ended up not pursuing the project.

[@stewartbuller3650]

No mention about connecting the reversing camera - what trigger wires to connect?

[@GHunter5575]

Reverse light so when the light comes on the camera is activated.

[@nigelwilding1145]

Those on screen aerials are bad

[@johnpaulirvine5845]

Your volume is too low!

[@ryanpinnell4246]

I know I have hopefully now sorted this issue form new videos 🤞

[@joshpharo6920]

What's with the shitty audio?? Goes quiet at all the important times 🙄