You should use the clear silicone caulk instead; it's pure silicone, far superior and the same price (sometimes cheaper). Still, you got a great impression with that item you were molding👍.
There's really no need i think. Just use as much as you want, the flour is to prevent the silicone to stick everywhere. I used to do this, but i used the clear one. And i wet the silicone caulk just enough to be active, then knead it with some cheap starch.
I wouldn't suggest baking...baking hardens polymer...so the mold wouldn't be malleable or easily moveable in order to remove it from the object. It may crumble. Just my guess. Not sure tho
@@ashchan30 You can actually bake polymer clay in open silicone slump-molds, but don't use the kind of silicone in this video, because it's a poor material for the job. Use the clear stuff, which is all silicone. Always let the baked polymer clay cool down in the mold and then take it out. You can achieve some excellent results, because proper silicone can handle oven temperatures easily.
@@jeymous Will it be colored with black marker at the end? If I want to color some specific lines on the mask made of silicone and starch, because I tried the marker on silicone only, it was like oil on a mask that does not stick to it, and the black color was gone, will the matter be different with silicone and starch?
@@jeymous I will not wear the form, I will put silicone paste and starch in a thin layer inside a hollow mold of gypsum so that it becomes a mask, will it work like this?
@@roiapaint4300 خب برای قالبگیری مناسبتره و اگر بخوایید مدلسازی کنید خمیر هواخشک بسازید . داخل پیج اینستاگرام آموزشش رو قرار دادم . instagram.com/Jeymous_diy
If I want to make a mold for a 3D figurine, how can I make the mixture more liquid so it covers Al the parts and corners of my figurine? Would I be able to use the mold many times?
You should use the clear silicone caulk instead; it's pure silicone, far superior and the same price (sometimes cheaper).
Still, you got a great impression with that item you were molding👍.
i use clear silicone. but when cure resin it's not be harder. just half hard. its be harder when i'm put out resin.
Thanks for the content this was really helpful ❤❤❤
🌱🌹
We are a manufacturer of liquid silicone rubber for mold making.
Can I use resin in it?
Looks pretty straight forward. But just in case, are there any measurements for reference?
There's really no need i think. Just use as much as you want, the flour is to prevent the silicone to stick everywhere.
I used to do this, but i used the clear one. And i wet the silicone caulk just enough to be active, then knead it with some cheap starch.
In which ratio , you used silicone and cornstarch
Can i use flour instead of cornstarch? I try the dishes soup but take to long.
چه جالب👌🏼
Kindly share how to remove its smell 😢
With this method is it safe to use it for polymer clay and baking it in the oven after?
I was wondering the same thing too, hopefully they reply
I wouldn't suggest baking...baking hardens polymer...so the mold wouldn't be malleable or easily moveable in order to remove it from the object. It may crumble. Just my guess. Not sure tho
What you use
@@ashchan30 You can actually bake polymer clay in open silicone slump-molds, but don't use the kind of silicone in this video, because it's a poor material for the job. Use the clear stuff, which is all silicone. Always let the baked polymer clay cool down in the mold and then take it out. You can achieve some excellent results, because proper silicone can handle oven temperatures easily.
Any one tel me complete method of home base pach silicon mold work ?
چه ايده جالبى😍👍🏻كلى چيزهاى قشنگ ميشه باهاش خلق كرد👌🏻🌺ممنونم استاد❤️
Hamishe lotf darid shoma 🍀🍀
NICe
Haloo ka, apakah bsa pakai silicon ruber ?
❤❤
How long until it drys?
Takes about an hour. Without cornstarch a few days
خیلی عالی
What do you use? Gips/cast and?
silicone and cornstarch …
Can you use flour?@@roznv.groeling4304
Tried it. Just makes a complete mess
Can i make Halloween mask from it ?
Yes 👌 sure
@@jeymous Will it be colored with black marker at the end? If I want to color some specific lines on the mask made of silicone and starch, because I tried the marker on silicone only, it was like oil on a mask that does not stick to it, and the black color was gone, will the matter be different with silicone and starch?
@@jeymous I will not wear the form, I will put silicone paste and starch in a thin layer inside a hollow mold of gypsum so that it becomes a mask, will it work like this?
میشه ازش بعنوان خمیر استفاده کرد و اشکال کوچیک یا مجسمه ساخت؟
برای قالبگیری مناسبتره این خمیر
@@jeymousچرا ؟ معایبش برای ساختن باهاش چیه؟
@@roiapaint4300 خب برای قالبگیری مناسبتره و اگر بخوایید مدلسازی کنید خمیر هواخشک بسازید . داخل پیج اینستاگرام آموزشش رو قرار دادم . instagram.com/Jeymous_diy
your hands😢
از چه موادی استفاده کردین؟؟؟
از چسب آکواریوم و نشاسته ذرت
@@jeymous ممنون، عالی بود🥰
If I want to make a mold for a 3D figurine, how can I make the mixture more liquid so it covers Al the parts and corners of my figurine? Would I be able to use the mold many times?
👏👏👏👏
🙏❤